|
|
Javelin MIL-COTS PFC Power Supply
The Javelin is designed to withstand the extreme environments and stresses that are often inherent in military applications and industrial uses. Operating from single or 3-phase AC lines, it provides a single output from 2 to 54 Vdc at up to 5,400 watts. |
|
Drake GS:RM™Heavy Duty Rack Mills
The Drake GS:RM (Gear System: Rack Mill) produces steering racks for a major automotive manufacturer. Cycle time is less than 35 seconds. Its performance earned an overall perfect ten rating from the auto parts maker.
This four-axis machine features a customized automatic loading system designed to use specific alignment features that assure accurate, quick, repeatable loading. High-powered table vice clamps secure the part and feed jaws accommodate two part configurations with no changeovers required.
An available power helix on the milling spindle assists in fast changeovers to a variety of part configurations producing angles up to plus or minus forty-five degrees. |
|
ERNI offers three different versions of connector housing for Series TMC connectors ace. To DIN 41 652 and MIL C-24308.
KSG 200 Fully insulated housing with integrated shielding plates
KSG 185 Housing with snap-in latches and/or screw locking, integrated coding
KSG 183 Housing with snap-in latches
All three versions of housing are of two-shell design which allows the wring of the female or male connectors prior to housing assembly. All three housing versions can easily be disassembled.
With the KSG 185 (cable connector housing Series KSG 185) it is possible to lock the two shell halves with snap- in latches. There is also a screw for vibration-proof applications. The connector shell halves of Series KSG 183 are screwed together after wiring.
For applications with screw locking the KSG 185 offers locking parts for thread types M3 and #4/40 NC-2 A.
Features:
Fully insulated housing
Two-shell design to facilitate assembly
Various types of locking such as snap-in, slide and screw locking
Reliable strain relief with strain relief clamp
Cable entry: KSG 200: one 15°entry; KSG 185: sizes 9 and 15, one 75° entry sizes 25, 37 and 50 two 75° entries; KSG 183: size 9, one 90° entry-sizes 15, 25, 37 and 50, three 30° and 90° entries.
Cable sleeves and blind plugs included
All parts needed to mount the housing are supplied
KSG 200 with optimal ESD-protection and high EMI/RFI shielding
KSG 200 with integrated shielding plates
KSG 185 with integrated coding
KSG 185 available in metallized version as well |
|
| ... products without technical information |
| |
| The thermoelectric units, with cooling power from 50W to 300W, represent an innovative solution for controlling temperature inside small enclosures or electronic equipment. They offer significant advantages: long life, easy installation, eco-friendliness, unaffected by vibration and capable of functioning when installed at any angle. |
|
Rittal system climate control offers holistic process protection. This includes the cooling of sensitive electronics in enclosures and cases for industrial process control, as well as server and network technology, regardless of the ambient conditions. But these are not isolated solutions - with Rittal, everything is interconnected. Perfectly linked and controlled cooling technology with eco-friendly, energy-efficient equipment.
From passive air climate control to active liquid cooling of high-performance CPUs, Rittal offers the full range of components and systems. They are designed precisely according to your requirements and application spectrum. Software-assisted planning and calculation of requirements, together with modular, rack-compatible technology, help to minimise investment costs, thereby offering a particularly future-safe solution with a high degree of flexibility. |
|
COMMON FEATURES
Specifically developed for mounting on the wall or door of
electronic enclosures, the air conditioners cover a cooling
capacity range from 330W to 4000W.
Common to all models is the “Selfcleaning” condenser coil which remove the necessity of the air filter, avoiding the ordinary maintenance.
Most models are equipped with Condensate Dissipator (from EVE11).
The standard control is electromechanical, and as option an electronic
one (EBB). |
|
Cooling power : from 360 to 2500 W (L35/L35 according to DIN 3168).
To be fixed either on the front door or side panel or top panel of a cabinet.
Factory pre-set to achieve an average cabinet temperature of 35°C max.
Customer’s advantages :
- One single cut-out for cabinets from 850 to 2500 W.
- Powerless condensation evaporating device.
- Electronic control with alarms and safety values (high pressure, cabinet opened, cabinet temperature, fan and compressor’s thermal breakers).
- Ventilated hermetic compressor.
- Standard spare parts for all models. |
|
Cabinet Coolers - Frigid-X™ series for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air.
Cabinet Coolers - Frigid-X™ series are compact and can be installed in minutes through a standard electrical knockout. There are virtually no moving parts.
Cabinet Coolers - Frigid-X™ series are ideal for all NEMA 12 and NEMA 4 rated panels.
Advantages:
- Low in cost
- Compact
- No CFC's
- Fast installation
- Stabilize enclosure temperature and humidity
- Virtually maintenance free (No Moving Parts)
- Mounts in a standard electrical knockout
- Stops heat damage and nuisance tripping
- Eliminates fans and filters
- Prevents dirt contamination by keeping enclosure at positive pressure
- Units applicable to all environments including high temperature to 200ºF |
|
Switchgear cabinet coolers on Peltierbasis
Type: Kp
Tensions: 24V DC
Achievements: 30W - 300W
Enclosure IP 20
Operating temperature: -10 - +60°C
Aluminum corpus with stainless steel housing
|
|
This range of rack air - conditioning units for 19-inch cabinets benefits from all our experience in this industrial field.
The depth of 560 mm allows racks of 600 mm to be integrated without any difficulty.
The electrical and refrigerating components of this rack range are the same as those used in vertical and horizontal air-conditioning units. |
|
Switchgear cabinet air conditioning system - ventilation for the switchgear cabinet
19 " - exhaust modules:
Tensions: 12V - 230V
Deep one: 156mm to 660mm
Number of exhausts: 1 - 15
To the avoidance of warming esters in the switchgear cabinet
Circulation fan with swing frames
Tensions: 12V - 230V
To the purposeful ventilation of construction units
Filter exhaust and filter exhaust IP 55
For a switchgear cabinet ventilation with filtered supply air |
|
Magister 2
Spaces requiring a particularly high level of indoor air quality (filtration, controlled temperature and humidity). Designed for installation in the space to be air conditioned.
Available in 10 models and 2 versions:
- Under: Top return and downflow in raised floor,
- Over: Front return and top supply.
Cooling capacity: 12 to 90 kW
Air flow rates: 3,000 to 22,000 m³/h
- CW: single source, not self-contained, supplied with chilled water,
- TCW: dual source, chilled water and independent backup.
- Packaged unit,
- Double-skin panels with M0/A1 insulation, self-supporting casing (models up to 45 kW) or aluminium frame (models above 45 kW),
- Choice of G4 or F7 filter or G4+F7 filter,
- Cooling provided by a chilled-water coil fitted with two-way or three-way valve,
- Direct-expansion cooling coil, with AIRIAL C or EUROPA 2C built-in water-cooled condenser or separate air-cooled condenser,
- Plug fans with speed-controlled EC motor,
- Heating provided by hot-water coil or electric heater,
- Steam humidifier,
- Complete electrical cabinet, CIAT µAIRCONNECT or Carel electronic control,
- Many options. |
|
| Vortex CoolersTM from ITW Vortec keep electrical cabinets and control panels cool, clean and protected. An affordable, maintenance-free alternative to air conditioners, the easy-to-install Coolers have no moving parts to wear out. Vortex Coolers incorporate vortex tube technology that uses filtered compressed air to produce a refrigerated air stream distributed throughout the enclosure. Unlike fans that pull in hot, dirty air, the enclosure Coolers maintain a light positive pressure inside the cabinet to effectively seal out the surrounding contamination, heat and humidity that can wreak havoc on sensitive electronic controls. Refrigerated air produced by the vortex tube enters the cabinet while hot air is expelled through a relief valve. Models are available to deliver up to 5000 BTUH of refrigeration. The UL-listed enclosure cooler systems are thermostatically controlled and are available in NEMA 12, 4 and 4X rated models. |
|
. Completely dismountable modular cold storage cabinet with standard net volumes of 1400, 2800 and 4100lt.
. Constructed with 80mm thick panels injected with polyurethane and designed for easier and quicker mounting.
. Available for both positive and negative storage temperatures.
. Tray holder, storage grill or glass door options |
|
Control Cabinet Cooler for cover and lateral attachment
Cooling capacity 320 - 5000 Watt
Electronic control systems are prone to malfunctions if exposed to high temperatures. The cooling is often performed by the blowing-in of external air or via indirect air/air heat exchangers without filters.
As these systems always work according to the actual air temperature, the cooling performance is often unsatisfactory, especially during the hot season. The Control Cabinet Cooler has been constructed on the basis of 20 years of experience in refrigeration technology and tens of thousands of industrial cooling plants built for all kinds of applications. The cooling equipment is a unit ready for instant connection, and just an opening needs to be provided in the control cabinet for its installation.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
