|
|
A16B Alarm Annunciator(604 600)
• Programmable with PC or other control devices
• Easy transitions between hardware / software configurations
• 3 port 2.5kVAC isolation
• High efficiency indicator LED’s in front panel
• Low power consumption
• DIN 19235 standard compatible signal functioning
• Removable signal labels
• Wide operation temperature range
The A16B is programmable industrial 16 channel alarm annunciator with different signalization options and compatible with DIN19235 standards. A16B alarm inputs interrogated with 24/110 AC/DC voltage. High isolation is provided between input, output and power supply circuits for maximum safety. A16B is DIP switch configurable and also programmable via Windows based software which allows easy and flexible configuration of input and output characteristics.
|
|
|
|
|
|
The Series 725 Alarm Annunciator provides the ideal solution to all your alarm system requirements. This innovative and unique design gives exceptional flexibility, reliability and programmability.
- Only 145mm deep
- Fully programmable with power applied and without having to remove lightboxes, backplanes or alarm cards
- Proven, ASIC-based technology: fewer components means higher reliability
- Ultra bright LED's available in a range of six colours
- Surpasses the EMC and LVD directives.
With a range of three window sizes, six colours and a choice of bulbs or ultra-bright LED illumination, a format and size will be available to match your exact requirements.
Each individual alarm way is fully programmable from the front, using the integral programming module. This allows for many different features giving thousands of possible combinations.
Numerous relay outputs are included as standard to connect to external equipment and individual repeat relays can be supplied as an option. The ASIC technology utilised in this design has a proven track record in a wide range of industries around the world.
|
|
LN1000 Intrinsically Safe Annunciator provides a unique solution for problems with hazardous area alarm indication. The annunciator provides a visual display of the alarm status including 'first-up' information and can be mounted in the hazardous area for the benefit of operators working in any Zone.
The lightweight stainless steel construction gives a compact and simple to install modular unit which can easily be expanded by the addition of extra alarm cards.
Maintenance can be carried out live without the necessity of 'gas checks' or prior shutdown. Unlike flameproof, purged and type 'N' systems, installation is simple and relatively low cost.
Power to the annunciator is supplied from the safe area through a single Intrinsically Safe interface for up to 32 channels.
With the addition of a number of ancillary devices a complete intrinsically safe alarm and control package can be provided
|
|
The PEX7250 Explosion Proof Alarm Annunciator offers a vast range of features and benefits normally reserved for use in safe area annunciators only. The heart of the system is our field proven Series 725 Alarm Annunciator which is available in 3 individual window sizes 30mm x 30mm, 30mm x 60mm or 60mm x 60mm. Reliability of the system is vastly improved over conventional systems with the use of ASIC's (Application Specific Integrated Circuits) for each pair of alarms, removing any reliance on common control cards. The standard enclosure is copper free cast alloy, finished in a light grey two-part epoxy paint, making it ideal for offshore applications.
Systems are available in a range of formats and sizes and are certified for use in Zone 1 hazardous areas. All systems are automatically covered by our standard 5 Year Warranty.
|
|
|
|
|
|
Explosion Proof Alarm Annunciator from RTK Instruments
RTK Instruments’ PEX7250 Explosion Proof Alarm Annunciator, suitable for use in Zone 1 and Zone 2 hazardous areas, offers a vast range of features and benefits normally reserved for use in safe area annunciators only.
The heart of the system is RTK Instruments’ field-proven Series 725 Alarm Annunciator, which uses multi-redundant ASIC technology to greatly improve reliability compared with conventional systems. This high level of reliability is backed up by RTK Instruments’ 5 year warranty.
The PEX7250 Alarm Annunciator is available in a range of sizes and shapes from one to 56 points in a single enclosure, with a choice of three window sizes. Illumination is using high reliability, ultra-bright LEDs.
The standard enclosure is copper-free cast alloy and finished in a light grey two-part epoxy paint, making it ideal for offshore applications. A stainless steel enclosure is available as an option.
RTK Instruments is a leading global supplier of safe and hazardous area alarm, display and interface products and can provide specific application advice, as well as product recommendations and installation advice.
|
|
Federal Signal introduces the SemiStat® Status Indicator. Designed to meet the needs of the OEM market, the SemiStat is an attractive, easy-to-install and economical status indicator.
- Available in 24VAC/VDC
- Tri- or quad-color models
- Available in chrome (model SCC) or white (model SCB) finish
- 100,000 hour vibration resistant LED lamps
- Integrated sounder
- Surface mount
- Indoor use only
|
|
The RTK UC625 Alarm System, developed from the field proven P625 range of alarm annunciators, offers the latest in ASIC technology packed into an compact design for applications where panel space is at a premium.
However simple or complex your alarm requirement, the UC625 with compact packaging, ASIC Technology and "no master module" philosophy, will give the most cost-effective solution.
Programmable alarm sequence, signal duplicating relays, dual horn relays, LED display, proven ASIC technology and dual redundant universal power inputs make it ideal for all industry sectors.
|
|
Format DIN 144x144.
Automat for centralising technical faults with 12 high luminosity leds, PC parameter settings and text display.
A "top of the range" product with all the functions of the J3000 with all the flexibility of PC programming.
Many additional functions.
Application: All industries including "high risk". This product is preferable in situations requiring sophisticated or different, channel by channel settings.
Simple, user-friendly PC software supplied. Bus RS422/485 Modbus/Jbus.
Selections by input channels
Output scheduler
Scheduling and processing of alarms and indicators
Text display with History and settings menu
|
|
Integral or Remote Logic Design
Expandable to 256 points
Choice of Lamp or LED displays
Optional internal pushbuttons
Fully "DIP" switch configurable
Optional ModBus Slave Serial Port
IEC61508 Certified
Repeat Relay Option
The Omni16C is the latest upgrade in the series of field-proven popular Omni16 alarm annunciators (previously sold under the CONLOG brand).
Completely redesigned to take advantage of the latest technologies, this latest release offers backlit LED displays, and serial communications.
|
|
|
|
|
|
The DTS 500 positioning system complements the operation of Instrument Systems spectrometers by providing a route to full automation of measurements. The positioning system is in particular suitable for determining viewing angle dependent properties and spatial homogeneity of display, panel graphics and LED lamp modules. The DTS 500 saves valuable time by eliminating manual alignment and guarantees more exact results with improved reproducibility. Operation of the entire 5-axis system is fully integrated into the SpecWin Pro software. Measurement results can be viewed as luminance and contrast distributions in Cartesian or spherical coordinates with ISO contours lines. Data can additionally be exported in table format to Excel.
The DTS 500 is available in various configurations:
- stand alone XYZ positioning system (e.g. for testing back-lit display and control elements for the automotive and aviation industries)
- stand alone 2-axis goniometer (e.g. for measuring the spatial radiation pattern of lamp modules)
- complete 5-axis system mounted on an optical bench (e.g. for testing LCD displays and entire instrument clusters)
- optional mountings for TOP 200, LumiCam 1300 and LumiCam 4000 available
|
|
Konica Minolta Sensing is the leading provider of Display Measurement instruments offering a broad range of highly specialised equipment to measure chromacity, luminance, flicker and color uniformity of any modern flat panel display using LCD, Plasma or OLED technology.
Display measuring solutions from Konica Minolta are considered "state of the Art" and are part of quality control devices in the production line of all major Display Manufacturers on a global scale.
|
|
CA-100Plus has higher speed, higher performance, and lower cost than its predecessor, the CA-100, which has been a standard of the CRT manufacturing industry since 1990.
Engineered for both bench top and production floor use, and fully compatible with data from the earlier CA-100 model, the new Minolta CA-100Plus CRT Color Analyzer provides higher speed (maximum 20 times/second), as well as Luminance and Chromaticity measurements with a new low luminance capability to 0.05cd/m2, making it suitable for measurement of gamma characteristic and contrast adjustment. The CA-100Plus is equipped with 100 memory channels. Up to 5 sensing probes can be used for simultaneous multiple point measurement. A USB interface connects the CA-100Plus to a computer, and the NEW Software Development Kit makes it easy to use Visual Basic or Visual C to automate measurement and adjustment factors.
|
|
|
The CA-210 LCD Color Analyzer is Konica Minolta's "next generation" color analyzer designed to measure color luminance, gamma characteristic and flicker on various types of Flat Panel Displays including LCD and EL. Faster than previous generation analyzers, the CA-210's measurement of luminance and chromaticity at up to 20 times/second makes it ideal in high production environments. (AND it can simultaneously measure up to five points on the screen. ) The CA-210's special optical design limits acceptance angle to within ± 2.5 degrees, thus eliminating the influence of the LCD's viewing angle dependency. Matrix calibration allows for high measurement of LCD displays that provide colors through additive mixing of three monochrome colors (R,G,B). A new low luminance capability enables measurements as low as 0.1cd/m2
|
|
Verify the opacity of containers with on-line, high-speed, accurate and reliable measurements. The OPAX-1000™ combines proven sensor technology with innovative hardware to provide an easy-to-use system to measure light transmission in a wide variety of applications.
Many products require packaging designed to protect the contents from the damaging effects of light. Establishing pass/fail criteria for minimum opacity of these containers and providing on-line measurement eliminates defects and allows real-time quality control of these processes. The OPAX-1000™ provides a reliable solution, allowing you to monitor every container, and identify and remove containers with low opacity.
|
|
The module PW0049 is a stand-alone measuring device which is conceived for the absolute measurement of self-illuminating objects.
Its function is to reproduce the CIE 1931 2° CMF's as precisely as possible. The resulting Tristimulus measuring values X, Y, Z form the basis of most of the common color spaces used today.
|
|
Mii 2 mobile Color Analyzer PR0084
With the Mii 2 mobile Color Analyzer PR0084 acts it around a highly precise and highly sensitive color measuring system for the calibration of monitors. In the scope of supply a software is already contained, additional for on-line colorimetry is software for monitor calibration available.
Technical data:
Detector XYZ (CMF) silicone photo Cell
Optics 2 degrees of opening angles
Measuring range Luminanz: 0,05 to 3.000 cd/qm
Chromaticity: 0,05 to 500 cd/qm
Genauigkeiten* Luminanz: +-2% 1 digit (1 ~3,000cd/m2)
Chromaticity: +-0,002 Illuminant D65
Chromaticity: +-0,0025 CCT 4000-15000K
Chromaticity: +-0.0065 for other colors
Interface USB 2.0
Current supply of 4.7 to 5,5V DC over USB plugs
Measuring speed of max. 10 Messungen/s for low sensitivity
Max 4 Messungen/s for high sensitivity
Temperature compensation 20 to 40 degrees
|
|
|
HazardWatch is a modular Fire and Gas Detection System built using state-of-the-art industrial automation/control equipment to perform the requirements of an integrated Fire and Gas Detection System certified by Factory Mutual to be compliant to NFPA 72 (2002).
|
|
The Model FL3111HT is a high temperature rated (125°C) ultraviolet (UV) optical flame detector designed to detect unwanted fires while maintaining false alarm immunity. The FL3111HT detects only in the UV spectral range for optimized speed of response.
The FL3111HT's electronics are integral within its stainless steel explosion-proof housing, allowing detector information to be processed at the point of detection. The electronics are fully separated from the Exe wire compartment offering protection during installation and service.
|
|
The Model FL3100H is an Ultraviolet / Infrared flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects fires by monitoring in both the ultraviolet (UV) and infrared (IR) spectral ranges, making it highly immune to false alarms. There is also a hydrogen-specific detector available that detects hydrogen fires.
FL3100 Series flame detectors' electronics are integral within their explosion-proof housings, allowing detector information to be processed at the point of detection. The detectors also provide a 4-20mA stepped output signal indicating detector status. The COPM (Continuous Optical Path Monitoring) self-test feature checks the optical path integrity (window cleanliness) and the detectors' electronic circuitry once every minute.
|
|
|
The Model FL4000 is an advanced multi-spectral infrared (MSIR) flame detector designed to provide superior false alarm immunity with the widest field of view. The FL4000 employs a multi-spectral optical IR sensing array with a sophisticated Neural Network Technology (NNT) system to reliably discriminate between actual flames and the vast majority of false alarm sources (such as arc welding). The FL4000 is designed to detect typical fires such as alcohol, n-heptane, gasoline, jet fuels and hydrocarbons. In addition, the FL4000 can see through dense smoke produced by diesel, rubber, plastics and lube oil fires.
|
|
Skum offers a range of electrical and manual fog/jet, water/foam monitors with exceptional flow characteristics. Our product range includes:
FJM-80 - a portable solution for foam/water discharge, used for fast response to fire incidents involving flammable liquid spills and vapour suppression
FJM-WTO - self oscillating units by internal water driven turbines with a low weight
FJM-MAN - manually operated monitors available for a number of alternate mounting positions, optimising throw range with delivery of water or foam in jet form or as a spray pattern
FJM-EL - remote control operation, with electric motor driven elevation and rotation movement.
|
|
| ... products without technical information |
| |
|
|
|
|
Specially developed for the supervision of clean-rooms, the CPE 300 is dedicated to measures of low pressure andor depression of air or neutral gases from 0/+10 Pa to -1000 /+1000 Pa.
The CPE 300 presents the advantage to become integrated perfectly into walls and to answer to the standard of cleanliness thanks to its stainless case (brushed or with lacquered).
It is equipped with 2 visual and audible alarms, with 2 reversers relays, of a big electroluminescent display and a process of autocalibration which guarantees in the time an excellent stability and a reliability of the measure in low as in high scale.
Thanks to its digital communication (RS 232 and Protocol Modbus RS 485), it offers the possibility of showing alternately (in addition of the measure of pressure) two other parameters resulting from temperature, humidity, velocity or airflow external sensors (KIMO).
Two innovative systems to facilitate the maintenance on-site :
· Its measuring element benefits from the SMART PRO system. It is individually adjusted and is automatically recognized by the device. Thanks to this process, it is possible to replace the measuring element in a simple and fast way without return of the sensor to the factory.
· The calibration in front face : this system allows to proceed to the calibration of the device without un-mounting it.
The sensor CPE 300 is so always operational !
Join our distribution network all over the word....Contact us !
|
|
Pressure transmitter, pressure switch Pressotronic
- operating pressure up 600 bar
- compact design
- up to 4 programmable set points
- alternative 1 analogue output + 1 programmable set point
- window and hysteresis function
- two outputs programmable 1-100 Hz
- direct or remote installation
- uneffected by cable length
- LED display with status indication
- pressure switch display 270° rotatable
- standardized manu structure
- max./min. memory
|
|
|
Analog and digital indicating units and transmitters for liquid level, differential pressure and flow measurement. Media 6 allows for connection of the dp-cell to your PC in the logistics center.
|
|
Sensor for differential pressure and volume flow, explosion proof
Electrical, explosion proof differential sensors series ExCos-P and RedCos-P, in acc. with ATEX 94/9/EC for use in hazardous areas zone 1, 2, 21 and 22 (in acc. to sensor type), for all kind of gas, mixtures, vapours and dust. 24 VAC/DC supply, Measuring range /- 100 Pa, /- 250 Pa, /- 600 Pa, /- 1250 Pa, /- 2500 Pa, /- 5000 Pa, /- 7500 Pa. Working range adjustable, output 0...10 VDC and 4...20 mA, actual value indication, aluminium housing IP 66, integral Ex-e terminal box. Series ExCos-P for use in Zone 1, 2, 21, 22. Series RedCos-P for use in zone 2, 22.
The module is for installation inside the hazardous area, an interface in the safe area is not required, installation of intrinsic safe circuit is not required. This saves cost, space and guarantees safety.
|
|
The dV-2 PS is a sophisticated digital pressure gauge with two independent pressure switch outputs. The gauge employs KELLER’s proven microprocessor technology which produces highly accurate results. All readings are linearised and temperature corrected, to give an accuracy of 0,2 %FS.
There are two independent switches for High and Low control functions. These are solid state and therefore not subject to wear. The switch points are programmed directly from the two front panel buttons and a menu system. Alternatively, the dV-2 PS can be connected via the RS485 link to a laptop/PC, and configured using KELLER’s “Pressure Switch Console” software. User defined configurations can be stored on the computer for future reference. Pressure sequences can also be monitored and recorded on the PC for application diagnostic purposes using KELLER’s Read30 software.
|
|
|
|
see the results for the following category : 
