|
|
|
High quality analogue instruments designed to measure an extensive range of electrical and electronic parameters. This comprehensive range offers DIN instruments, ANSI switchboard meters, panel indicators, sealed and ruggedised instruments, and complementary selector switches for line to line and line to neutral readings. Instruments are precision engineered and robust in design, ensuring accurate measurement and display in the most demanding of environments. All instruments are available in a range of styles, sizes and specifications to meet the exacting needs of industry.
|
|
The 236, 237, and 238 Source-Measure Units (SMU) are fully programmable instruments, capable of sourcing and measuring voltage or current simultaneously. These systems are really four instruments in one: voltage source, current source, voltage measure, and current measure.
Related Applications:
- MOSFET measurements
- GaAs measurements
- Bipolar measurements
- Diode characterization
- Oxide characteristics
- Electromigration testing
- Research and electronic manufacturing applications
|
|
E Probe now under development process
* Non contacting E field Measuring,
* Directional sensitivity
* Power supplies +/-12V
* Measuring range 1 milliVm-1 up to over 1000Vm-1
* Bandwidth : 10 mHz - 100 kHz
* White noise: μVm-1/√Hz experimentally shown
|
|
|
|
|
|
For over 35 years, LDS Nicolet has provided state-of-the-art data acquisition solutions for the test and measurement community. Today, we are the world's premier provider of out-of-the-box, ready to use systems for a diversity of physical and electrical applications. The Genesis system builds on a reputation of high performance acquisition and signal conditioning by providing a flexible, cost effective platform to meet all data acquisition and transient acquisition needs. With the Genesis, LDS Nicolet introduces the future of data acquisition.
Based on the concept of a mainframe with plug-in modules, the Genesis offers a wealth of capabilities. Up to 128 channels can be installed within a rack mainframe (56 channels in the portable tower mainframe), and multiple mainframes can be combined to an even larger system. Up to 400 MegaSample memory per board allows for high definition transient capture. Built-in data transfer acceleration gives you an overview of MegaSamples of data within seconds. With the world's best performance signal conditioning and 16-bit accuracy, Genesis is the right solution for your difficult measurement task.
Genesis Features
Combines Transient Recorder and Streaming Data Acquisition Capabilities
Programmable High-Performance Signal Conditioning
Sample Rates from
200 kS/s to 100 MS/s per Channel
Transient RAM to 400 MS per card, 12.8 GB per System Max.
Tower Mainframe with 7 slots or Rack Version with 16 slots (see lower picture)
Master Slave Option for Synchronized Acquisition on up to 1080 Channels
Unlimited Recording Size and Duration
IRIG and GPS Time Code Options
Local SCSI Drive Storage for Safety Critical Applications
|
|
Portable PD Analyzing System LDS-6/UHF
for PD measurements and monitoring on GIS or Cable Systems
The LDS-6/UHF is a state-of- the-art, portable digital measuring system for the UHF processing of partial discharges acquired from installed GIS sensors, or UHF sensors. It combines the features of a PD detector and spectrum analyzer.
PD quality tests on GIS using installed GIS sensors
PD testing on HV Apparatus, using UHF technology
Designed for on-site PD diagnosis tests as well as for manufacturing and research
Single channel or Dual channel
Available in 19" housing with external PC connected via Ethernet, or portable case with built in mini PC
|
|
Digital Partial Discharge Measuring and Diagnostics System for industrial and general HV test floor environments.
The LDS-6 is a highly sophisticated digital measuring system for the PD detection according to the standard IEC 60270, VDE 0434 as well as various IEEE and other standards for the High Voltage Test and Measurement Technology. It meets also ICEA T-24-380 standard for Cable Industry.
PD quality tests on high voltage equipment
PD diagnosis on developing insulating materials
Designed for on-site PD diagnosis tests as well as for manufacturing and research
PD fault location for power cables
|
|
| ... products without technical information |
| |
The CoMo Injection process monitoring system Type 2869A allows zero-defect injection molding production by analyzing the cavity pressure curve.
A bright 12.1" color touch screen monitor Type 5629A3 makes operation of the CoMo Injection system even quicker and easier, and accelerates communication with the system. The new IP Setup Program now being supplied with the system allows simple automatic detection and configuration of CoMo Injection units installed in production.
Version 2.0 of CoMo-MIS Type 2829A…, the database system for storing measured and calculated process data, is now also available in the four languages mentioned above.
All of the CoMo Injection and CoMo-MIS systems that have already been installed can be updated with the latest version. The IP Setup Program works with all CoMo Injection units equipped with Version 1.2.
|
|
|
|
|
|
|
VM20 is a modular, multipurpose measuring and test system for grinding machines easily programmable by the user. Available as independent unit or for rack-mounting, equipped with local hardware or remote operator panel as well as with Windows Software panel, digital I/O logic interfaces, Profibus and RS232. The wide range of grinding wheels balancing devices, with or without embedded acoustic sensors, applicable on single or multiple grinding wheels or long grinding wheels, allow to automatically and rapidly reduce vibrations which generally cause errors and imperfections on worked surfaces. The wide range of AE transducers configuration available, with assembly both on rotating and stationary machine components, can be used to monitor the machine conditions, through FFT analysis, and to determine the grinding wheel position when it contacts the piece to be worked or the tool-dresser. During working, diameter and roundness gauges, as well as the pieces positioning gauges, allow to achieve a constant production quality together with a cycle time improvement, thanks to correct feeding speeds for roughing-out and finishing.
|
|
The panel-mounted measuring and control stations DULCOTROL® are online measuring and control units which are available in a variety of designs and optimised depending on the individual application for the three most important applications in water treatment:
Drinking water / Food & Beverage
Cooling water
Waste water
|
|
Model SC104V:
- Three independent channels allow full control of three devices
- Modular design permits addition or removal of channels
- Soft limits always visible on display
- Variable speed control through front panel or GPIB interface
- Rack mount option
- Fiber optic interface; ST connectors
- Full manual control from front panel
- 115 or 230 volts AC
- System diagnostics
- Six channels for remote switching of auxiliary equipment
- Compatible with industry standard automation software
- User friendly
- Expanded command set: SPEED, TARGET, SCAN, AUX
- LCD display
- Independent jog keys
- GPIB TARGET command
- Self-test
- Fully IEEE488.2 compatible
|
|
|
|
|
|
TOPAX NT is a wall-mounted controller and measuring amplifier which has been developed on the basis of the latest microprocessor technology. It can be used for the most different tasks in swimming pool applications, water treatment and process engineering. With its versatile possibilities a solution is offered which stands out for its user-friendliness, interfaces and modularity.
Besides the classic water parameters such as free chlorine, pH value, temperature or REDOX potential it is also possible to measure and further process combined chlorine with the TOPAX NT. Furthermore the combined chlorine content is displayed.
Due to a graphics display the menu-driven operation uses plain text available in different languages. Trend values can be shown as curves on the display. With the help of this curves the user can set the parameters directly.
As an option the TOPAX NT can also carry out the functions of a gas warning device. The chlorine gas sensor can be connected directly.
Digital inputs at the TOPAX NT allow the user to monitor the metering performance of the pumps connected or to control filter flushing continuously, for example.
|
|
|
|
|
|
● CMGZ 600 Series
The CMGZ 600 Series controller integrates many functions into one compact housing. It offers selectable control of unwind brake or drive, intermediate drive, or winding drive. The CMGZ 600 Series controller is available in a 2 channel version offering 2 independent closed loops for tension control of 2 tension zones in any configuration.
● Functional description
The CMGZ 600 Series controller offers a large dual line LCD display, plain text selectable in multiple languages, and only 4 programming keys makes this a very easy to set-up and operate control unit. Tension reference values and all
parameters and functions can be set with keys or remotely via PC or BUS interface. Digital signal filtering, automatic offset calculation, built in
taper tension option and automatic startup ramping function along with all other features creates a very powerful and user-friendly tension control system.
The CMGZ 600 Series controller operates on a 2 millisecond cycle time for fast reaction performance and if utilised, the built-in line speed signal overlay capability improves the overall control dynamics even more. In addition, a built in pilot control program which adapts the control parameters dynamically based on the actual roll diameter, and both +/-10V and a 0/4-20mA outputs provides the flexibility that makes the FMS CMGZ 600 Series the leading tension controller in the industry.
|
|
21Plus! TM Measurement and Control Platform
The newest release of 21Plus! TM, is the very latest technology
offered to the continuous web gauging market. This is the
latest, significantly enhanced release of EGS’ widely installed
21Plus! TM Measurement and Control platform. It takes all the
proven features of 21Plus! TM and enhances them to include
improved operating features and data security features, while
maintaining the safety and security of proven operational
experience.
|
|
Thermoset MIVI 8003 ensures an on-line viscosity measurement of any fluid at a required reference temperature.
PRINCIPLE :
The fluid is permanently drawn from the process brought at the required reference temperature, its viscosity measured, then re-injected in the main line.
ADVANTAGES :
• No extra installation
• Short response time: 2 to 5 min
• Insignificant maintenance : ½ day / year
• Small size
• Reliable and accurate
• Usual power : mains and pressurized air
• Optional density measurement
• Simple, Rugged
• Exproof approval : ATEX EEx d IIB T4...T6
OPERATING CONDITIONS :
• Maximal temperature at the cell: 200 °C
• Reference temperature: according to the requirement
• Maximal inlet pressure: 16 bar
• Maximal outlet pressure: 40 to 120 bar according to product viscosity
MEASUREMENT RANGE : (at reference temperature):
• 1 – 100 mPa.s ; 10 – 1000 mPa.s ; 100 – 10 000 mPa.s
|
|
|
|
|
|
The Davenport PETPlus from Lloyd Instruments is a unique test instrument designed for the safe solvent-free intrinsic viscosity (IV) measurement of
moisture-sensitive PET. It can be operated in stand alone mode or with our powerful data analysis software package NEXYGENPlus PET.
Most IV test instruments use the solvent method. However, not only is this method expensive, but also involves the handling and disposal of toxic solvents. The PETPlus instrument by contrast offers significant cost and environmental benefits using a non-solvent method, which is kinder to the environment, and saves on the high cost of purchase and disposal of solvents.
Unlike other IV measurement instruments, the PETPlus can test polymers at virtually all stages of the process: from incoming resin, powder and granules, molten polymer, preforms, PET bottles and even re-ground material.
Tests can be completed in under 20 minutes. Rapid testing can be carried out using ancillary equipment for controlled sample collection and preparation.
The microprocessor controlled system provides high accuracy measurements, temp. control to ±0.1°C and storage of up to 600 results. An LCD displays multi-lingual instructions for the test as well as the results. An RS232 interface allows connection to a PC for fully automated software control and downloading of results.
Molten PET is extruded through a calibrated die by nitrogen gas under pressure and the LVDT probe movement against time is recorded and displayed. The system measures the optimum flow rate and calculates intrinsic viscosity. The PETPlus also measures the degradation factor and provides the mean and standard deviation for the batch.
|
|
The TT-100® In-Line Viscometer is designed to provide years of trouble-free service in closed loop systems which require constant monitoring and associated control of product viscosity.
|
|
Flow Time Measuring Instrument CUPTIMER 243 T
Objective determination of flow time for viscosity measurements using standardized flow cups. Including temperature bath and adapter rings for the different flow cups. Automatic measuring sequence with optical detection of the efflux stream of sample. Flow times up to 200 s can be read from the LCD with an accuracy of 0.01 s.
|
|
|
|
|
|
PROCESS LIQUID IN-LINE VISCOMETERS DC-51 SERIES
LEMIS process DC-51 series of process in-flow viscometers have been carefully engineered for continuous measurement of liquid viscosity to fit large range of applications.
LEMIS process use streamlined resonant tube which is washed on either side by measured liquid. The oscillation period of the vibrating tube and its frequency characteristics depend on behaviour of the measured liquid allowing simultaneous and accurate direct measurement of dynamic viscosity.
Large offer of factory pre-built installation packs allows quick and simple field installation with minimal pipeline disturbance or process downtime. The meter supplied with rigorous factory calibration for viscosity. The DC-51 series proves high accuracy and long-term calibration stability insensitive to mounting position, plant vibration, process flow rate and pressure variations.
New age of LEMIS process combined meters measure various critical parameters: density, concentration, dynamic viscosity, kinematic viscosity, temperature. Two meters in one device saving cost of installation and maintenance!
|
|
MIVI PROCESS VISCOMETER FOR INLINE, ONLINE AND ON REACTOR APPLICATIONS
Simple, Rugged, Reliable, No wear part, Low maintenance, Operates in any position, Easy installation
GENERAL TECHNICAL DATA
• Maximum working temperature up to 200 or 300°C
• Maximum working pressure up to 60 bar or 150 bar (500 bar possible at request)
• Maximum viscosity range up to 1000 Pascal.second
• Watertightness of the body IP67
• Material 316L SS, Hastelloy, ...
• Protective coatings Diamolith, PTFE, enamel
• Exproof approval ATEX, FM, JIS
• Sanitary design on request
INDUSTRIES :
Petrol, Petrochemical, Chemical, Food & beverage, Cosmetics, Printing & coating
APPLICATIONS :
Polymerization control, Heavy fuel oil control, Inks control...
PRODUCTS :
Oil, Polymers, Fuels, Bitumen, Resins, Gels, Emulsions, Cheese, molasses, Paints, Inks...
|
|
| ... products without technical information |
| |
PM100-G - Fiber Optic Power Meter
Simple optical power and loss measurement
PM100-S - Fiber Optic Power Meter
Simple optical power and loss measurement
PM200 - Fiber Optic Power Meter
Link certification and reporting tool
FO600 - FiberMeter Optical Power Meter
FO610 - High Power FiberMeter Optical Power Meter
Ideal for testing and certifying in both Multimode and Single Mode applications
|
|
Ideal for link qualification, the FiberBasix 500 series comprises the ELS-500 Light Source and the EPM-500 Power Meter. These instruments come with pass/fail thresholds (LED indicator) and a memory capacity of 1000 data items.
Applications
Link-loss characterization (ELS-500 Light Source)
LAN/WAN certification (ELS-500 Light Source)
Link-loss characterization and LAN/WAN certification (EPM-500 Power Meter)
Key Features and Benefits
Error-free testing features: automatic wavelength recognition, and no offset nulling required
Data transfer to a PC via USB connection
One-touch storage of results for all wavelengths at once (on the EPM-500)
Complete reporting software
|
|
|
The OP510 was specifically designed for applications where cost effective solutions for measuring, monitoring and logging of insertion loss or power fluctuations are needed. The OP510 is a small (4"x2"x1.25") desk friendly module designed such that minimal movement and bending of the reference- and test cables is necessary. This results in stable, accurate and repeatable measurements.
|
|
Two FasTesT ports: a three-wavelength singlemode port, including either 1625 nm or 1490 nm, and an optional two-wavelength multimode port, for a total of up to five wavelengths
Visual IL and ORL pass/fail analysis
Compatible with both the FTB-400 and FTB-200 platforms
FTTx ready: allows for the testing of passive optical networks (PONs) at 1310 nm, 1490 nm and 1550 nm, the three wavelengths recommended by the ITU-T (G.983.3) for PONs
Three-year warranty and recommended calibration interval, error-free testing and minimized training time
|
|
|
Luna Technologies' Optical Backscatter Reflectometer (OBR) delivers unprecedented inspection and diagnostic capabilities for the fiber-optics industry. Luna's state-of-the-art OBR provides isolation of faults and problems well before final test, saving hours in rework and hard dollars in yield loss.
|
|
|
Insertion Loss and Return Loss measurement for all four FTTX wavelengths. The 'no mandrel' method combined with concurrent dual-wavelength measurement makes this instrument the most efficient tool in FTTX component verification.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
