|
|
1. TL-10 High voltage probe test leads.
2. TL-20 HV lead with alligator clip.
3. TL-115A Nema 5-15 (115V outlet) test adapter.
4. TL-IEC HV test lead with 3 pin IEC receptacle.
5. TL-2 Two wire ground bond 30A test leads. ' "G " version has 30 A rated return lead. |
|
| The 3D-Sensor NG is a further development of our worldwide accepted and proven Universal 3D-Sensor. Its distinguishing features are improved mechanics and a new and compact design. |
|
| 3-D touch probes from HEIDENHAIN were conceived for use on machine tools in particular milling machines and machining centers. 3-D touch probes help to save costs in the workshop and in medium-size production runs: NC controls can automatically run setup, measuring and verification tasks and most controls can also run them under program control. |
|
Measuring Range 0.5 mm
Resolution Programmable to <0.01 ΅m
Tip Forces down to 5 g
Excellent Repeatability
Up to 3906 Readings/Second
Industry Standard Styli
Compact Size
Direct Reading in mm/inch
Solartron's new Digital Lever Probe has been conceived for the precision measurement market. This probe is ideally suited to applications where the use of axial measuring probes is not possible, and where a low tip force and a high number of probing points are required. Its simple design and exceptional reliability result in a reduced cost of ownership without any reduction in performance. |
|
0.5 mm Total Measurement Range
Resolution Programmable to < 0.01 ΅m
Simple Installation and Sensor Change
Excellent Repeatability and Robustness in two planes
Suitable for Operation in Bores with key slot
Very Compact Size
Changeable Tips
Up to 3,906 Readings/Second
IP65 Protection
Traceable Calibration
CE Marked
The Solartron Digital Mini Probe is a compact, low profile, transducer intended for measurements in confined spaces such as bores. The product is based on a parallel spring structure that is significantly more robust than a single leaf arrangement. This greatly improves the reliability of the sensor, extending its working life and allowing it to be used in more demanding applications, such as automatic gages. The parallel spring also ensures a high level of repeatability, both on axis and across axis, so that it can be used in dynamic applications where profiling is required. |
|
Features:
» Gemodek Probe
» Probes
» Probe-Changing system
» Optical measuring systems
» Handbox
» Wireless control panel
» Control panel
» Marking tool |
|
One probe head for every inspection task.
With its own family of probe heads integrating a high-precision SWISS MADE
mechanics, TESA offers a complete solution for three-dimensional measure-
ment. |
|
Automated version fitted with TESASTAR-m – Provides enhanced measuring
capabilities through the use of dedicated accessories such as the modular
probe changer. |
|
The BARCOR CHAMFER GAGE is a precision instrument designed specifically to measure the top (major) diameter of a chamfer, countersink, center drill, or tapered hole. Merely press the spring loaded, conically ground, precision 3-blade Gaging Plunger into the chamfer or countersink and instantly read the dial in .001" or .01mm/.02mm diameter increments.
The CHAMFER GAGE is a direct reading gage. No Setting, Master (Standard) or look-up chart is required. To "Zero" the gage or check the setting, press the base of the gage against any flat ground surface and adjust the dial to read the "Set To" number stamped on the back. |
|
The BARCOR Electronic CHAMFER GAGE is a precision instrument designed specifically to measure the top diameter of chamfers, countersinks, center drills, or tapered holes. Simply press the Electronic CHAMFER GAGEs spring loaded Gaging Plunger into the piece being measured and directly read the size in .0002" or .005mm with the SAME gage. Or, at the press of a button, change to Comparative Mode from a known standard.
Like BARCOR's well-known mechanical counterpart, the Electronic CHAMFER GAGE requires no Setting Master (Standard) or lookup chart. To Zero or Set the gage, just press the base against any flat ground surface and press the "on" button. Equipped with rechargeable long-life batteries, the gage may also be powered continuously through its 110 VAC adapter/battery charger or directly from a printer, PC, data collector, etc. |
|
Solartron Analogue Gauging Probes incorporate a precision linear bearing, which gives exceptional repeatability.
Spring Push
Pneumatic Push or Vacuum Retract
Feather Touch
The ultimate in rapid, high accuracy measurement. |
|
We offer three main versions of our Digital Probe
Spring Push
Pneumatic Push
Feather Touch
The Probe is an absolute measuring device that delivers accurate results when switched on, regardless of any 'OFF' movements. |
|
Incremental length gauges from HEIDENHAIN offer high accuracy over long measuring ranges. These sturdily made gauges are available in application-oriented versions.
They have a wide range of applications in production metrology, in multipoint inspection stations, measuring equipment monitoring, and as position measuring devices.
|
|
Precision measuring probes:
- for universal applications
- stroke length 10 / 30 / 48 mm
- mounting on shaft sleeve
- mounting via tapped holes on body (DIT 30, DIT 48)
- cable lifter
- version with rubber bellows (DIT 30, DIT 48) |
|
PROBES
Capacitive absolute measuring probes, plunger type
Resolution 0.0001 mm
Measuring range from 2 to 50 mm
Cable up to 20 meters (standard 1.5m)
Ball bearing and / or integrated vacuum lifter available with P2 and P5
Interchangeable contact point M2.5
Clamping stem Ψ 8-h6
Compatible with the D80S, D90 and D100S display units
Compatible with the TSM mesuring column
Compatible with the E25 data collector
D80S
Display unit with 8 analog channels
CCFL graphic display with backlight
Resolution up to 0.0001 mm
Input for 1 Sylvac probe P2 to P50
Extension to 8 probes using D102 or D108
RS232 Input / Output
Analog and Opto-coupled output (command signal) |
|
Leica T-Probe is a Walk-Around armless wireless probing device for probing of hidden, hard-to-reach points and measuring of up to 9 cars in one setup with minimal setup times, sets new standards by increasing accuracy, offering a ten-fold increase in point acquisition rate and providing user-assignable multi-function buttons
Small, light, user-friendly, and more accurate than any other hand-held probe in the world, the Leica T-Probe gives you more than 6 Degrees of Freedom: It gives you the right way to measure. Now featuring longer styli, Leica T-Probe reaches up to 30m (98ft) in any dimension. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
