Washers

Internal diameter: 8 mm
External diameter: 12 mm
Thickness: 1 mm

Part number - ALU081210 - EAN - 8719593019185 - Unit - Each - Long description - Aluminium washers - Inside diameter - 8 mm - Outside diameter - 12 mm - Thickness - 1 mm

Internal diameter: 3 mm - 70 mm
External diameter: 5 mm - 100 mm

Seating washer Stop pin, with cones Adjustment plate, round Adjustment plate, rectangular Adjustment plate, rectangular with lubrication grooves Stop disc

Internal diameter: 4.1 mm - 30.5 mm
External diameter: 7.6 mm - 48.2 mm
Thickness: 0.8 mm - 6 mm

Greased plain steel, VSK Material: Steel Surface: Plain RoHS-compliant: Yes Form: VSK

Internal diameter: 3 mm - 6 mm
External diameter: 9.5 mm - 16 mm

Locating Washers Rear fastening of screws in the groove Suitable for use with Button-Head Screws ISO 7380 Locating Washer 5 D3, bright zinc-plated Locating Washer 5 D4, bright ...

Internal diameter: 2 mm - 44.5 mm
External diameter: 6 mm - 83 mm
Thickness: 1 mm - 14.5 mm

Flat and flanged washers. These parts are usually supplied in VHDS (very high density silicone) rubber and the full reference should include: ► The letter S ► The appropriate grade which corresponds: - to ...

External diameter: 60, 38 mm

Clips, when used in combination with Insulation pins, secure all types of material that can be readily impaled. Multi-lanced hole design provides superior self-locking feature. All steel self locking speed clips are made from tempered ...

Internal diameter: 1.6 mm - 25.2 mm
External diameter: 5 mm - 40 mm
Thickness: 0.5 mm - 3 mm

The Article series: 003- washers are impervious to corrosion and innumerable chemicals, as it is produced out of nylon-6 (PA-6), polyenthylene (Ld-PE) or PVC, and characterized with the following: anti loss lip (F) suitable ...

Internal diameter: 7.8 mm - 358 mm
External diameter: 9.8 mm - 398 mm
Thickness: 0.15 mm - 2 mm

We are offering a standard range of wave washers for the most used application and we did set for it the following: Rotating inner ring Rotation speed between 0 and 3000 r/min Normal operating ...

Internal diameter: 0.2 in - 0.78 in
External diameter: 0.5 in - 1.625 in
Thickness: 0.188 in - 0.375 in

These washers are ideally suited for joining machine sections which are out of parallel. They adjust themselves for a positive, firm base. With radius “E” and the angular 140 combination, line contact is formed around ...

External diameter: 8.2 mm - 152 mm
Thickness: 0.81 mm - 7.8 mm

Types of washers produced: ► Conical washers ► Flat washers ► Toothed washers ► Rake tooth washers ► Washers for nut assemblies ► ...

Internal diameter: 10 mm - 100 mm
External diameter: 21 mm - 142 mm
Thickness: 3 mm - 12 mm

Lockwashers DIN 5406 for Locknuts DIN 981, Stainless Steel Material: Stainless steel 1.4301 (AISI 304). Safety plates for locknuts DIN 981. A keyway is required on the shaft thread

Internal diameter: 0.53 in - 3.06 in
External diameter: 1 in - 4.5 in
Thickness: 0.031 in - 0.094 in

Phenolic-backed FIBERGLIDE® thrust bearings provide high load capacity and low friction for use where the elimination of lubrication is desirable. Typical applications include industrial valves and valve actuators, vehicle kingpin assemblies ...

Internal diameter: 10.5, 8.5 mm
External diameter: 34, 24 mm
Thickness: 1.25 mm - 2 mm

Vibration control of traverses and pipe bridges made of MPC-Support channels Can be fitted using screws, threaded pins and rods up to M10 Ideal supplement to DÄMMGULAST® Resilient pad in channel installation Advantages Highly ...

Internal diameter: 9 mm - 24.3 mm
External diameter: 40 mm - 110 mm
Thickness: 3 mm - 8 mm

... Rebound protection Rubber stop washers are versatile components for effectively limiting movement. They are preferably used for axial path limitation with Conical Mounts or Bushes. These elastomer-coated washers ...

Internal diameter: 13.7 mm - 58.9 mm
External diameter: 20.2 mm - 74.4 mm
Thickness: 3.2 mm - 4.6 mm

Heyco® Sealing Washers FEATURES - For use with Heyco-Flex fittings. - Liquid tight, dust tight, and oil tight at enclosure. - Suitable for wet locations requiring a separate gasket between the box and fitting. - ...

Internal diameter: 3 mm - 55 mm
External diameter: 24, 30, 42, 78 mm
Thickness: 1 mm

High grade, miniature thrust washers and standard washers in Chrome Steel 52100 and Stainless Steel 400c. Boca Bearings can supply thrust washers capable of handling high temperature ...

Internal diameter: 1.7 mm - 54 mm
External diameter: 4 mm - 98 mm
Thickness: 0.3 mm - 8 mm

DIN 125 A Similiar to ISO 7089 Plain washers type A (without chamfer) A2 | A4 | A5

Internal diameter: 19 mm
External diameter: 32 mm
Thickness: 3 mm

The FG INOX Stainless steel washers are available with diameters from 1.7 to 43 mm and in sizes M1.6 to M42. These units are separated based on their inner diameter, outside diameter, thickness and standardized nomenclature ...

Spring pins DIN7349 Washers for bolts with heavy type spring pins

Internal diameter: 10.2 mm - 120.5 mm
External diameter: 30 mm - 60 mm
Thickness: 3 mm - 10 mm

Internal diameter: 0.22 in - 1.03 in
External diameter: 0.437 in - 2 in
Thickness: 0.125, 0.188, 0.156, 0.25, 0.281 in

Thick, heavy-duty washer with both faces held flat and parallel. Available in steel for stud sizes 1/4 to 1" (M6 to M22 in metric), and stainless steel for stud sizes #10 to 3/4" (M5 to M18 in metric). Made in USA.

Internal diameter: 4.5 mm - 252 mm
External diameter: 9.5 mm - 400 mm
Thickness: 0.05 mm - 4 mm

Waved Washer Springs Emmotts have over the years gained an enviable reputation for their manufacturing capabilities for waved washers and are a world leader in the supply to the electric motor industry. ...