|
|
- Guide for opening and closing.
- Blades 4 times reversible.
- Fine shape for easy penetration in the scrap.
- Special design for easy handling of scrap.
- Arm link.
- Main shaft adjustable.
- Powered by the bucket cylinder. |
|
| ... products without technical information |
| |
Heavy duty machine for continual use.
Available for manual operation (Model 320-000) or hydraulic operation (Model 320-100).
Includes 1m length stop for cutting accurately to length without waste.
Incorporates cutters for 4 profiles of rail, plus copper earth rail 10mm x 3mm.
Successive operations of the machine are used to punch elongated holes at each end of the rail. One hole is in line with the rail, the other hole is at right angles to the rail.
Standard hole size is 6.4mm x 12mm. Alternative punch sizes are available.
Easy replacement of punches and die. |
|
- Can be used as scrap chopper synchronized with the press or on its own.
- Synchronism with the press is effected by a proximity sensor reading off one of the press cams or by a microswitch contact.
- There is a fixed lower blade and the upper blade and the upper blade is mobil and inclined like a guillotine.The blades are manufactured from hardened and ground steel.
- The shearing pressure is applied by pneumatic cylinders with electrovalve. The cylinder piston rods press directly upon the upper blade.
- The blank holder with springs reduce the screw dislocation.
- The hydraulic power pack with heat exchanger provides a working pressure of 100 bar, until 60 pulse at the first.
- The upper blade holder run over columns with lubricated bushings.
- This scrap chopper cut in small pieces the scrap.
- Usually it's managed by a feeder's numeric control. If it's acquired without other machinery of a line, it must be equiped of a electric cabinet.
- Strip thickness from 3 to 5 mm.
- The cylinder and pump can be designed to suit your requirements. |
|
| This bench shearing machine cuts plastic covers and raceways up to 125 mm wide perfectly without burring. |
|
The Holmatro hydraulic cutter range is specially designed for heavy industrial applications and consists of different models with different blades and (cutting) features, for a wide range of industrial cutting applications.
Our mobile cutters are made of lightweight high-grade aluminium and are optimised for mobile use.
Our stationary models are specially developed for continuous use, processes whereby repeated tasks are carried out at a fixed point on a production line. The accent has been placed on durability of the tool and ergonomics for the operator. |
|
Schleuniger offers several automatic cutting machines (cutters) for high precision cutting of wires and cables of all types including cables with tough insulations, flat ribbon cable, glass optical fiber (GOF) and cables with plastic optical fiber (POF). Other tubed or profiled materials can also be processed.
Choose from several machines - depending on your processing requirements and diameter of material to be processed. From basic cutting machines (12 mm / 47'' outer diameter) up to high-performance cutters (25 mm / 1'' outer diameter). Material widths up to 100 mm (3.94'') can be handled.
Schleuniger also offers several pre- and post-processing equipment for an automatic production line. Choose from a wide range of prefeeders (dereelers), inkjet printers, hotstamp marking machines, coiling machines or stacking machines to automate your production. |
|
AUTOMAT 300 is the latest product innovation by Meccanica Nicoletti and represents the most advanced step towards the full automatization of the cable warehouses.
AUTOMAT 300 is the most efficient and the fastest machine among the current ones available on the market.
With maximum speed of 300 m/min. compared with a standard winder, Automat 300 works 3 times faster
THE FUNCTIONS OF AUTOMAT 300
Automat 300 is able to fulfill the following functions by itself:
* loading
* unwinding
* measuring
* cutting
* reel/coil winding
|
|
Description:
- Ram automatically retracts after the cut is complete. No need to push a retract lever. Tool is automatically ready to perform the next cut.
- Two-speed pump advances the ram quickly to start the cut.
- Cutting blades are specially hardened and precision ground to hold their sharpness.
- Lightweight and easy to use.
- Cutting head rotates 360° for making cuts in tight locations, and flips open to make mid-span cuts easy.
- Includes one-hour battery charger, steel carrying case and two batteries.
- Choice of a 120 volt, 230 volt, or 12 volt battery charger.
- U.S. Patent #6,206,663. |
|
Description:
Cuts in 7 seconds. Jaws slide open quickly to save time between cuts.
- 11-ton (97 kN) ram powers cutting jaws. Jaws are specially hardened and precision ground to hold sharpness.
- Lightweight and easy to use. |
|
SP-02P Squeeze-Eze™ Power Pack
SP-02P is designed to use the identical jaws as the SP-01P, but delivers considerably more power for tougher applications. Made of durable aluminum, the tool is small (5 1/2" long x 1 3/4" diameter), lightweight (13 oz) and can be operated at air pressure of 60-100 psi (850 lbs. of cutting force). Will cut up to 0.10" soft steel wire.
A foot operated model is available (SP-02PF) which includes two (2) 5 foot air hoses and hex keys. Optional WS-2000 work station, A-202 bench stand and 105 four way footswitch are available.
As with the SP-01P, the SP-02P uses the jaw sets listed below. Jaws are optional. Order separate. |
|
| The cutting tools have blades made of high tensile steel. The cutting edges are designed to make the cut surface as smooth and straight as possible, with the minimum force. We have two functional cutting and stripping tools, the SCT001 (0.5-6 mm²) and the Embla (0.02-16 mm²). For stripping the insulation from power cables there is the Tor stripping tool (ø 4.5-40 mm). The Oden stripping tool (ø 4.5-40 mm) is used among other things for signal, telephone and computer cabling. |
|
Description:
Two-speed mechanism saves cutting time by closing the blades rapidly and shifting to normal speed to perform the cut.
- No more pushing on stubborn release buttons-the blades open automatically when the cut is complete.
- Completely new ratchet mechanism improves durability.
- Narrow profile permits use in deep boxes, against walls, or on floors.
- Durable, lightweight fiberglass handles. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
