|
|
HSM Vertical Baling Presses
Compact, space-saving and reliable
> Application areas: retailers, wholesalers, manufacturers, central storages, industry, distribution centres, logistics
> Suitable for the following material: cardboard, paper, foils; further materials upon request (e.g. polystyrene, cans, PET/UBC, stiff plastics, etc.)
> Pressing power from 33 kN to 540 kN
> Bale weight from 25 kg to 550 kg
> Bale strapping: manual, with polyester tape or wire cut to length
HSM baling presses reduce the volume of your waste piles by up to 95%! That means you save valuable space that the bulky packaging materials take up on-site. And you generate a secondary raw material of sorted bales, which can be incorporated back into the recycling system.
|
|
Air-Operated Baler for cardboard, paper, plastic and big bags:
• No oil
• No electrical parts
• Safe & easy to use
• Easy to clean
• Fits anywhere
The baler model 205 and 205TS are powerfull balers with very small footprints
|
|
Small and medium-sized front-loaded balers
ORWAK 3105, 3110, 3210, and 3300: These front-loaded balers require a minimum of floor space and produce bales in the range 40 to 250 kg. High density bales mean lower transport costs!
NEW! ORWAK 3105 and 3110 are the smallest front loaded balers in Orwak's assortment and they are perfect for companies with small amounts of packaging material. The low height in combination with the small footprint make Orwak 3105 and 3110 fit where you need them! Capacity 3105: up to 40 kg cardboard/50 kg plastic
Capacity 3110: up to 60 kg cardboard/70 kg plastic
ORWAK 3210 is a small and efficient front-loaded baler with a cycle time of only 13 seconds. Capacity: up to 80 kg cardboard/100 kg plastic
ORWAK 3300 is a medium-sized baler with a built-in digital display. The height is only 1980 mm for convenient installation where the ceiling is low. Capacity: up to 200 kg cardboard/250 kg plastic
|
|
Top-loaded bin compactors
ORWAK offers a range of bin compactors suitable for compaction into standard two- to four-wheeled plastic/steel bins in the capacity 240-1100 litres.
ORWAK 4100 is constructed for four-wheeled bins and ORWAK 5070 is a flexible combination of a multiple-chamber baler and a bin compactor.
ORWAK’s LE TL and LE FL are based on an ingenious modular system and made from maintenance-free aluminium. Waste can be compacted into standard two-wheeled bins or into plastic bags.
|
|
Ram Guides prevent platen from cocking when the chamber is unevenly loaded
Electrical Cabinet includes emergency stop button for easy and safe operation
Operational Handle for easy control of the platen upwards and downwards
Material Feeding Door for big-volume materials loading
Boltfor safe and easy access to the compressing chamber
Four-sided Door for easy tying and baling
CE Certified guarantees trouble-free operation
|
|
Two Hydraulic Cylinders for automatically lifting the chamber door
Ram Guides prevent platen from cocking when the chamber is unevenly loaded
Wide Mouth Feeding Door for big-volume materials loading
Electrical Cabinet includes emergency stop button for easy and safe operation
Lifting Chamber Door promotes work efficiency safely and cuts labor costs
Heavy Duty Platen incorporates special wire-tie guides for quick bale tying with wires or PET belts
CE Certified guarantees trouble-free operation
|
|
The number one solution for compacting your EPS (Expandable Polystyrene) minimum 20:1 measured on weight.
Mil-tek EPS Model 900:
• Capacity: 15 kg. per hour
Mil-tek EPS Model 1800:
• Capacity: 80 kg. per hour
|
|
Features:
You can open the two side doors at the same time
Two side doors can be opened at the same time
Designed to compact packaged products such as fertilizer, dyestuff, etc. directly into smaller and unifying sizes
Convenient for loading and saving your transportation cost.
Special customized pallet size according to your requirements
Quick and easy loading process.
|
|
Baling press is to presses suitably by lighter and moderately severe sticking packing, plastics, Tekstilien etc.
Baling press type LU 2.5 - 7050
Bundle weight 40 - 60 kg of charging hole 700x460 mm
Baling press type HY 5.0 - 7050
Bundle weight 50 - 70 kg of charging hole 700x460 mm
Baling press type HY 8.0 - 10060 fiber plastics
Bundle weight 100 -150 kg of charging hole 1000x550 mm
|
|
| ... products without technical information |
| |
|
|
|
|
MACHINE TENDING ROBOTS & SOLUTIONS:
SIA20 robot (20 kg payload) features a revolutionary 7-axis design with best-in-class wrist performance characteristics that enables amazing freedom of movement, coupled with the ability to maneuver in very tight areas. Short axis lengths/extreme motion flexibility allow it to be positioned out of the normal working area without limiting the motion range of any axis.
EH-series “Expert Handling” robots set a new standard for speed for large robots. These high-speed, high-payload robots are specifically designed for high duty cycle handling applications and offer superior performance.
HP-series “High-Performance” robots (payloads from 3-600 kg) are extremely versatile, general-purpose manipulators that excel at a wide variety of applications. These six-axis robots can be floor-, ceiling- and shelf-mounted for flexible layouts.
LoadWorld® is a flexible automation solution for machine tool tending. Pre-engineered modules include a Motoman robot, plus options for grippers, conveyors, part positioners, pallet floor locators, part cleaners and markers. Plug-and-play electrical connections facilitate integration. Motoman has standard electrical interfaces available for Haas, Mazak, Daewoo/Doosan, and Okuma machine tools.
EasyLoad™ machine tending software uses a conversational approach to speed programming and enhance productivity by reducing robot downtime for teaching. Using graphics, rather than text, and a touch screen interface on the Motoman NX100 robot programming pendant, EasyLoad guides users through simple step-by-step procedures to create complete, custom robot programs for the desired machine tending process.
|
|
Machine loading and unloading typically requires fast speed for improving process time efficiency. Nachi robots have a combination of high top speed, fast acceleration, and high accuracy.
The Nachi controller includes collision detection software to improve the response of a misloaded or damaged part. Additional axis slide options are available to extend the robot capability to tend several machines at once.
Nachi robot series applicable for machine loading:
- MR Series
- MC Series
- VS Series
- SC Series
- ST Series
|
|
System: Workpiece loader for weights up to 250 Kg (560 lbs)
Application: Milling, drilling, grinding, wire -EDM and other technologies
Connection to CNC: Serial; M-Function; Parallel I/O Bit
Workpiece Identification: EWIS (TM) Rapid
Technical Data
Max. transferweight: 250 Kg
Axis travel in X: 1600 mm
Voltage: 3x400 V+PE
Pneumatic consumption: 200 l/min at 5 bar (73.5 psi)
|
|
FANUC robots can capitalize on FANUC’s strong experience in Factory Automation:
- the robots have a special design with slim arm and wrist to allow operations in confined areas
- the new M-710iC series (20 to 70kg payload) is especially designed for machine tending
- most FANUC robots have flip over capability to operate in narrow spaces
- FANUC robots offer among the best cycle times in their class
FANUC robots bring advanced intelligence to increase the reliability and precision:
- unmanned operation is possible thanks to FANUC vision system, which is now directly integrated within the new R-J3iC controller as standard
- line tracking and multiple arm software can be coupled with vision to increase flexibility
- intelligent software options such as soft float and high sensitive collision detection ensure protection of robot, tooling and parts
- FANUC force sensor can be used for sensitive handling operations
|
|
FANUC robots can capitalize on FANUC’s strong experience in Factory Automation:
- the robots have a special design with slim arm and wrist to allow operations in confined areas
- the new M-710iC series (20 to 70kg payload) is especially designed for machine tending
- most FANUC robots have flip over capability to operate in narrow spaces
- FANUC robots offer among the best cycle times in their class
FANUC robots bring advanced intelligence to increase the reliability and precision:
- unmanned operation is possible thanks to FANUC vision system, which is now directly integrated within the new R-J3iC controller as standard
- line tracking and multiple arm software can be coupled with vision to increase flexibility
- intelligent software options such as soft float and high sensitive collision detection ensure protection of robot, tooling and parts
- FANUC force sensor can be used for sensitive handling operations
|
|
| ... products without technical information |
| |
The wide range of Bolzoni lift tables, with their usual safety and reliability features provide an effective solution to most lifting problems, to augment the safety by increasing the productivity.
Loading lift tables are used to load and unload vehicles by pedestrian or fork lift trucks without a loading dock for quick handling and designed to operate with maximum safety for off-centred crossing loads.
Capacity from 1.000 to 10.000 kg and wide range of options available such as wheel stops, goal post barriers, safety handrails manual bridge plate etc to meet specificic requirmentes and customised solutions.
Our tables comply with the European Safety of Machinery standards EN 292, Machinery Directive 98/37/EC and Safety requirements for lift tables EN 1570.
|
|
ACI scissor docks are specially designed to solve the problems of height difference between docks and trucks. They allow easy loading and unloading operations, whatever the height of the dock or truck bed, even when you do not have a loading dock.
This solution provides a permanently level board and more important course than with a dock leveller.
Our scissor docks are CE certified and comply with EN 1570 standard, as well as "Machines n°98/37/CE Directive".
The board is made of non-slip steel treadplate. The design of these boards enables them to withstand static or dynamic loads such as trolleys, pallet trucks, all types of forklift trucks...
The scissor docks are usually pit mounted, therefore providing access from dock to truck or dock to yard.
|
|
You can save the high cost of dock construction, work from any truck bed level to grade level and handle unstable loads quickly and safely with Dock Saver Lifts. These lifts can be installed indoors or outdoors and will handle all loads up to 20,000 lbs.
For applications where the height of the truck bed must be adjusted, Southworth also offers a line of extra heavy-duty truck levelers in capacities from 5,000 to 20,000 lbs. to meet even the most massive load requirements.
|
|
Widely used for warehouse and factory operations
- Especially designed for palletized loads transported by manual pallet trucks or powered pallet trucks
- Moving heavy equipment either onto or off a vehicle in a level mode
|
|
|
|
|
|
Autoquip Dock Scissors Lifts include several designs of powered loading dock equipment for moving wheeled or palletized loads onto or from delivery trucks of various heights onto or from your dock or grade level. Dock Scissors lifts can be surface mounted, pit mounted, or portable, and all meet the safety requirements of ANSI MH29.1.
Autoquip Truck Levelers are a superior dock solution to the traditional hinged dock-levelers or throw-over plates mounted onto the dock floor when faced with the challenge of loading & unloading trucks of varied heights. Hydraulic Truck Levelers are installed outdoors, in front of a dock or loading area, therefore not using valuable dock space. Truck Levelers also eliminate door security concerns and air loss is minimized in refrigerated or heated applications. Truck Leveler platforms can be provided with wheel guides, and are equipped with a provisional cut-out, to clear truck restraining devices, allowing the truck leveler platform to be located close to the face of the dock.
|
|
To overcome the extreme level differences between the road and vehicle bed, Loading Systems designed the PowerLift lift table.
The PowerLift is a hydraulic scissor lift table which, based on the modular concept, is available in a comprehensive range of dimensions and carrying capacities. As such numerous built-in options are available and significant savings in manufacturing costs can be achieved.
Furthermore, the comprehensive range of available options ensures that nearly all clients’ requirements can be met.
The top-level quality, safety and ease of operation are the key characteristics of the Loading Systems lift table.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
