|
|
The Miltek X-Press 100, 200 & 300 are waste compactors for mixed waste. The waste is compacted directly into a
plastic bag enabling you to compact even moist waste in a convenient and hygenic way.
|
|
Waste compactors and top-loaded balers
ORWAK 5030 - the classic in-bag compactor - is a small and versatile machine that reduces the waste volume by up to 10:1. Compaction into bags prevents spills and odour.
5030 Marine (with telescopic cylinder) is a special version for ships and off shore installations.
ORWAK 5030-NHD compacts hazardous waste, such as glass and cans/tins containing residual paint, oil and other chemical remains directly into drums for safer and easier disposal.
Top-loaded balers in ORWAK’s assortment are ORWAK 5010-E, 5031/5031-E and 6040-HDC. ORWAK 5031/5031-E alter between producing bales and compacting waste into bags. Model 5031-E has a larger chamber than 5031.
|
|
Fully automatic system with silo buffer
The RUNI Silo System has been designed to compact large amounts of material by using a silo as a buffer during peak periods. This saves labour costs and avoids wasted time and manpower, as the self-contained pre-crusher has considerably larger capacity than the compactor.
The pre-crusher and the compactor are separate units in a typical fully automated silo system. The material is fed into a Heavy Duty Pre-crusher with high-capacity, and after this it is blown through a system of pipes to the silo. The silo automatically distributes the material on to one or more compactors at the ideal rate.
Silo systems can also be used when compacting dust, or when limited space means that the feed hopper and compactor must be separate, for example on a separation line, where the pre-crusher can be located in the unloading area, while the compactor and silo are located in a separate room.
|
|
|
|
|
|
RUNI SK240 Screw Compactor
The screw compactor for the greater requirements
Save space and handling costs through rapid, efficient waste management
Save energy – no heat required in the process
Profit from selling for reuse
Airtight - suitable for compacting dust
Different configurations for a large number of materials
Heavy Duty Pre-crusher can be fitted for particularly tough and dense materials
The SK240 Screw Compactor compacts various materials, e.g. EPS fish boxes and packaging in the ratio 50:1. This achieves a density of about 270 kg/m³.
The RUNI SK240 can be fitted with either a 45o hopper or a vertical hopper, depending on the requirement. The machine shown here is fitted with a feed hopper designed for manual feeding of fish boxes, etc. Custom solutions are available as required for dust, alu cans, PET bottles etc.
The machine is fitted with hydraulic/electrically-controlled jaws, which allow it to maintain an almost constant compression pressure.
Power consumption
Primary motor 5.5 kW
Hydraulic pump 0.55 kW
Pre-crusher motor 1.1 kW or 5.5 kW
Capacity
This machine can compact approx. 75 kg of EPS per hour (approx. 110 fish boxes with lids) or 3,000 half-litre PET bottles per hour.
|
|
|
|
|
|
RUNI SK370 Screw Compactor
The versatile and hard-working screw compactor for large quantities and industrial use
Larger screw, more power, more capacity
Profit from converting waste to reusable material
Save space and handling costs by processing waste quickly and efficiently
Save energy – no heat required in the process
Different configurations for a large number of materials
Heavy Duty Pre-crusher can be fitted for particularly tough and dense materials
The SK370 Screw Compactor is the big, heavy duty, versatile machine which compacts a large variety of different materials, including difficult jobs where other machines have to give up.
The RUNI SK370 can be fitted with a large range of accessories: various feed hoppers for manual or automatic feeding, conveyor belts, silo systems, a drainage matrix for de-watering and separation, etc.
RUNI also develops and supplies customised solutions as required.
Power consumption
Primary motor 15 kW
Hydraulic pump 0.55 kW
Pre-crusher motor 1.1 kW or 5.5 kW
Capacity
The machine can compact about 200 kg EPS (about 300 fish boxes with lids), 9,000 half-litre PET bottles or 3,000 3 litre metal cans per hour.
|
|
|
|
|
|
RUNI SK120 Screw Compactor
Compact and user-friendly screw compactor for EPS
Save money by reducing waste-collection
Save space and handling costs at the warehouse
Takes up limited space – can even be located under the pallet rack
The RUNI SK120 is the perfect solution for environmentally conscious supermarkets, electronics and appliance retailers, fish companies and other companies who want to minimise their waste costs. It is a small compactor for companies with limited, but continuous, quantities of EPS which can be managed by feeding manually. With dimensions of only 1.75 x 2.95 x 0.50 m (HxLxW), it is easy to find space for the machine in the warehouse or on the production line.
The SK120 compacts EPS in the ratio 50:1. This gives a density of about 300 kg/m³. The compactor is equipped with an easy-to-read ammeter, which makes it very easy to adjust the compaction.
Capacity
The machine compacts about 18-20 kg EPS per hour (about 30 fish boxes with lids).
Energy consumption
Motor 1.5 kW
|
|
The BaleTainer® from Strautmann Umwelttechnik GmbH is a new and unique machine for compaction of paper, cardboard packagings and emptied PET bottles. With a filling comfort of Presscontainers and the bale result of a 180 t channel baling presses a new generation was developed in the waste management technology.
The large filling enables the input of big cardboards (approx. 130 x 200 cm) or up to 17,500 1,0 l PET bottles. The filling of the presschamber, the output and binding of the bales is all automatic!
The compact design (approx. 200 x 500cm) is provided by an innovative pressconcept. The BaleTainer presses a bale in three slices and not as usual in one piece. Thereby are less pressing forces, energy and space required.
The mill size bales are optimal for direct marketing. 100% truck and container load!
|
|
| ... products without technical information |
| |
|
The T4 was engineered for machining the largest size of aerospace structural parts.Carbon-fiber-reinforced plastic (CFRP) has been extensively applied to aerospace structural parts to reduce the weight of aircraft and improve their fuel economy. The use of titanium alloys has also been increasing recently because their coefficient of thermal expansion is compatible with that of CFRP. Machining productivity is extremely low for titanium alloys because their hard-to-cut nature limits the cutting speed owing to the relationship with tool wear. Makino has developed the T4 to improve machining productivity for these hard-to-cut materials. Typical machining applications for the T4 include edge frames and pylons.
|
|
Sturdy, accurate and absolutely reliable, the new TRIM series by Belotti is the show-piece of t-axis machining centers dedicated to the trimming of plastic and composite materials. Like the previous MKN model, the new TRIM machining center ensures extreme accessibility to the work area, so that the workpiece-holder template can be accessed without any problems.
The adjustment and working qualities of the TRIM series machining centers meet any needs fully in terms of machining speed and quality. Among the various optionals automated loading/unloading systems (rotary tables and parallel loaders) enable tooling the machining center quickly and saving precious time.
|
|
For materials like as Nomex, Kevlar, Aluminium usw.
Shafts / receptions.
Circle-knives.
Special-circular saw-leaves.
|
|
| ... products without technical information |
| |
|
|
|
|
NORDUC® tubes and connectors
The NORRES corrugated plastic protection tubes, NORDUC®, are highly flexible and liquid tight.
Applications
- for electrical installations, installation in switchboard plant, switch cabinets, mechanical engineering and robotics
- as suction and pressure hose for gaseous and liquid media
- for hydraulic and pneumatic hoses
- for moving machine parts
Properties
- highly flexible
- gas and liquid tight
- good resistance to alkalis and acids
- good resistance to UV and ozone
- kink-proof
- approved to UL94 (flame-retardant), partically up to fire class V0
- easy to cut through
- also available in large diameters
IP 68 to EN/ IEC 60529
Temperature Range
from -40 °C up to +135 °C (short time +150 °C approx.)
Construction and material
- corrugated full plastic tube; wall: high grade polyamide, polypropylene (PPmod) or polyurethane
Connectors
Our one-piece NORDUC® connectors are quick and easy to fit. They are vibration resistant and also available in stock in large diameters.
|
|
|
|
|
|
Plastic conduits and connectors
NORRES Plastic conduits, WELLFLEX, NORFLEX (PVC or Polyurethan) and NORPLAST, have the following characteristics:
- liquid tight
- highly flexible
Applications
- for electrical installations, installation in switchboard plant, switch cabinets, mechanical engineering and robotics
- as suction and pressure hose for gaseous and liquid media
- for hydraulic and pneumatic hoses
- as robust protection conduit
Properties
- highly flexible
- gas and liquid tight
- good resistance to alkalis and acids
- kink-proof
- interior protection against corrosion
- partially smooth interior and exterior (easy retraction of cables, easy cleaning of exterior surface)
up to IP 68 to EN/ IEC 60529
Temperature Range
from -40 °C up to +90 °C (short time +125 °C approx.)
Construction and material
- WELLFLEX® construction: wall thickness depending on diameter; wall: high grade soft PVC/ special premium ether-polyurethan (Pre-PUR®); spiral: plastic coated spring steel wire
- NORFLEX: wall: high grade soft PVC/ special premium ether-polyurethan (Pre-PUR®)
- NORPLAST: hard plastic spiral integrated in the wall; wall: high grade soft PVC: spiral: rigid PVC
Conduit connectors
NORRES can supply all standard connectors and thread profiles for the various hoses or combines them to form customised solutions. These connectors are tailor-made for our cable protection systems. Optimum compatibility and tightness are guaranteed.
|
|
|
|
|
|
* Flex IPCX neutral 3321 SUPERLUB® :
APPLICATIONS Where an higher mechanical resistance is required. It can be embedded under the floor, under plaster, in the ceiling.
MATERIAL PVC
COLOR Neutral
QUALITY MARKS IMQ, VDE
STANDARDS CEI EN 50086-1
CEI EN 50086-2-2
COMPRESSION RESISTANCE Class 3 medium (higher than 750N on 5 cm. at +20°C)
IMPACT RESISTENCE Class 3, medium (2 joule at -5°C)
MINIMUM TEMPERATURE RANGE Class 2 (-5°C)
MAXIMUM TEMPERATURE RANGE Class 1 ( 60°C)
* Flex IPC blue 3321 SUPERLUB® :
APPLICATIONS Where an higher mechanical resistance is required. It can be embedded under the floor, under plaster, in the ceiling.
MATERIAL PVC
QUALITY MARKS IMQ, VDE
STANDARDS CEI EN 50086-1
CEI EN 50086-2-2
COMPRESSION RESISTANCE Class 3 medium (higher than 750N on 5 cm. at 20°C)
IMPACT RESISTENCE Class 3, medium (2 joule at -5°C)
MINIMUM TEMPERATURE RANGE Class 2 (-5°C)
MAXIMUM TEMPERATURE RANGE Class 1 ( 60°C)
* Flex IPCN black 3321 SUPERLUB® :
APPLICATIONS Where an higher mechanical resistance is required. It can be embedded under the floor, under plaster, in the ceiling.
MATERIAL PVC
COLOR Black
QUALITY MARKS IMQ, VDE
STANDARDS CEI EN 50086-1
CEI EN 50086-2-2
COMPRESSION RESISTANCE Class 3 medium (higher than 750N on 5 cm. at 20°C)
IMPACT RESISTENCE Class 3, medium (2 joule at -5°C)
MINIMUM TEMPERATURE RANGE Class 2 (-5°C)
MAXIMUM TEMPERATURE RANGE Class 1 ( 60°C)
|
|
SUPERLUB® The internal lubricated surface makes easier to thread the cables, reduces the friction, overpasses the obstacles, avoid abrasion, crack and damages to electric wires.
APPLICATIONS
Where an higher mechanical resistance is required. It can be embedded under the floor, under plaster, in the ceiling.
|
|
Smooth inside, corrugated outside, double walled, protectiveunderground, large diameters conduits.
APPLICATIONS For cable conduits underground. Their flexibility an mechanical resistance allows installation even in the presence of irregularity of the ground.
MATERIAL HD, polyethylene high density.
High chemical and water resistance
COLOR Red.
Available also in green, yellow, black an blue on request with a minimum quantity of 2000m. per size/colour.
QUALITY MARKS NF-USE
STANDARDS CEI EN 50086-1
CEI EN 50086-2-4 (type N)
COMPRESSION RESISTANCE Higher than 450N on 5 cm. at +20°C
IMPACT RESISTENCE Type N (normal) at -5°C
3kg/h = variable with the size.
|
|
| ... products without technical information |
| |
The SOCO SYSTEM is designed to handle cases, plastic crates, trays plus many of the products inside.
The illustration shows a fully automatic packaging line consisting of the following standard SOCO SYSTEM modules: carton erector, 3-axis free arm robot, conveyors, carton sealer, pallet magazine, palletising robot and pallet stretch wrapper.
The modules can work together or as stand alone units.
|
|
Standard Roll Container 720 x 810 - Plastic base
Apart from the normal benefits of a Caddie roll container, the roll with plastic base offers the following advantages:
- light weight construction
- easy to maneuver
- quiet, low-noise design
A touch of color in the world of transport.
EP - H.1700
EP - H.1900
|
|
10003: Dollies for Crates 600x400 and 400x300 mm. Plastic yokes and Polyamide rollers 6 with rubber band
L.620, A.420 mm. Rollers 100 mm.
20003: Dollies for Crates 800x600 and 600x400 mm. Plastic yokes and Polyamide rollers 6 with rubber band
L.820, A.620 mm. Rollers 100 mm.
10013: Dollies for Crates 600x400 and 400x300 mm. Antistatic
L.620, A.420 mm. Rollers 100 mm.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
