|
|
HSM Fully Automatic Channel Baling Presses
Individual system solutions for custom disposal systems
> Application area: logistics, central storages, paper industry, printing plants, distribution centres, industry, disposal companies
> Suitable for the following material: cardboard, paper, foils (PPK), DSD, PET/UBC, composite materials and more
> Feeding: continuous feeding via several systems (e.g. conveyor-belt, pallet truck, suction system, etc.)
> Fully automatic compression and bale strapping
> Up to 1200 kN pressing power
> Bale weights up to 1000 kg/m³
> All kinds of feeding possible
> Innovaitve detailed solutions bring decisive benefits
|
|
HSM Vertical Baling Presses
Compact, space-saving and reliable
> Application areas: retailers, wholesalers, manufacturers, central storages, industry, distribution centres, logistics
> Suitable for the following material: cardboard, paper, foils; further materials upon request (e.g. polystyrene, cans, PET/UBC, stiff plastics, etc.)
> Pressing power from 33 kN to 540 kN
> Bale weight from 25 kg to 550 kg
> Bale strapping: manual, with polyester tape or wire cut to length
HSM baling presses reduce the volume of your waste piles by up to 95%! That means you save valuable space that the bulky packaging materials take up on-site. And you generate a secondary raw material of sorted bales, which can be incorporated back into the recycling system.
|
|
Drum crusher
Orwak 2500 DC is a drum crusher that can crush up to 60 drums per hour with any drained liquid collected for disposal.
Orwak 3210 DC is a combined baler and drum press that collects any residual drained liquid for disposal.
|
|
Air-Operated Baler for cardboard, paper, plastic and big bags:
• No oil
• No electrical parts
• Safe & easy to use
• Easy to clean
• Fits anywhere
The baler model 205 and 205TS are powerfull balers with very small footprints
|
|
Small and medium-sized front-loaded balers
ORWAK 3105, 3110, 3210, and 3300: These front-loaded balers require a minimum of floor space and produce bales in the range 40 to 250 kg. High density bales mean lower transport costs!
NEW! ORWAK 3105 and 3110 are the smallest front loaded balers in Orwak's assortment and they are perfect for companies with small amounts of packaging material. The low height in combination with the small footprint make Orwak 3105 and 3110 fit where you need them! Capacity 3105: up to 40 kg cardboard/50 kg plastic
Capacity 3110: up to 60 kg cardboard/70 kg plastic
ORWAK 3210 is a small and efficient front-loaded baler with a cycle time of only 13 seconds. Capacity: up to 80 kg cardboard/100 kg plastic
ORWAK 3300 is a medium-sized baler with a built-in digital display. The height is only 1980 mm for convenient installation where the ceiling is low. Capacity: up to 200 kg cardboard/250 kg plastic
|
|
|
|
|
|
High capacity front-loaded balers
News! Orwak 3610 officially launched! With a press force of 50 ton, it is our largest and strongest front-loaded baler and it can generate high density bales that weigh up to 550 kg! Orwak 3610 is equipped with a sliding door and an autostart function as standard!
ORWAK 3410, 3410 Sliding door, 3610 and 3810 are suitable for customers with large amounts of waste. They are all members of "The Silent Family" - Orwak's line of balers with a low sound emission.
ORWAK 3410 is a large front-loaded baler constructed for compaction of cardboard and plastic foil. The noise level is low – only 59.5 dB (A)! ORWAK 3410: capacity: up to 300 kg cardboard/450 kg plastic
ORWAK 3410 Sliding door: For even easier and faster loading this model of 3410 has a sliding door that opens automatically after each cycle. The baler is also equipped with an autostart function!
ORWAK 3810 is a large and powerful front-loaded baler with an extra generous loading aperture. It is equipped with a sliding door and an autostart function as standard. Capacity: up to 500 kg cardboard
|
|
HSM Horizontal Baling Presses
For many different materials
> Application areas: wholesale, manufacturers, logistics, central storages, paper industry, printing plants, disposal companies
> Suitable for the following material: paper, cardboard, foils, expanding foams, polystyrene, hollow vessels, metal buckets, barrels, car tyres and much more
> Pressing power from 80 kN to 320 kN
> Bale weight up to 600 kg
> Large loading aperture
> Compactions against counterplate by horizontal moving press ram
> Feeding: manual or automatic
> Bale strapping manual, with polyester tape or wire (HSM HL 3521)
> Advantage: low overall height, also suitable for bulky material
HSM baling presses reduce the volume of your waste piles by up to 95%! That means you save valuable space that the bulky packaging materials take up on-site. And you generate a secondary raw material of sorted bales, which can be incorporated back into the recycling system.
|
|
Multi-chamber balers
ORWAK 5070, 5070-HDC and 9020 are top-loaded multi-chamber balers for sorting and baling at source. Two chambers is the standard solution, but the system can be extended with more chambers when required.
ORWAK 5070 is a multi-chamber baler for compaction of paper sacks, cardboard and soft plastic etc. Capacity: up to 50 kg cardboard/80 kg plastic.
ORWAK 5070-HDC is also suitable for tougher materials like plastic containers and metal cans. Capacity: up to 80 kg cardboard/100 kg plastic.
Orwak 9020 is a large top-loaded extendable multi-chamber baler for sorting and baling diverse material. Capacity: up to 200 kg cardboard/300 kg plastic.
|
|
Air-Operated Can Press for pressing cans of up to 30 litres:
• No Oil
• No electrical parts
• Safe & easy to use
• Easy to clean
• Takes up very little space
|
|
Air-Operated baler =
• Low Energy Consumption!
• Fast Pressing Cycle!
• High Degree of Compaction!
• Easy Maintenance!
• Safe Operation!
Very versatile bale press for large amounts of e.g. Cardboard, Plastic, Paper and Big Bags
|
|
PLC Control and Touch Screen simplifies operation process and promotes working efficiency with all data displaying on LCD interface
Two Material Feeding Options are available - hopper loader with observation window or upward manual feeding door
Automatic Belting System ensures that the bales are tightly belt automatically
High-Efficiency and Low-Noise Hydraulic System guarantees years of stable and trouble-free operation
CE Certified guarantees trouble-free operation
|
|
PLC control and Button Board simplifies operation process and maximizes efficiency. The button board is an economical option.
Two Material Feeding Options are available - hopper loader with observation window or upward manual feeding door
Manual Belting Design ensures that the bales are tightly belt by trained operators
High-Efficiency and Low-Noise Hydraulic System guarantees years of stable and trouble-free operation
CE Certified guarantees trouble-free operation
|
|
|
Specially designed to bale all types of hollow plastic products such as PET bottles, disposable plastic tableware, HDPE/PP jars, jerrycans and drums, etc. The extended rams help to ensure that even the bottom products of the bale can be compacted.
|
|
Ram Guides prevent platen from cocking when the chamber is unevenly loaded
Electrical Cabinet includes emergency stop button for easy and safe operation
Operational Handle for easy control of the platen upwards and downwards
Material Feeding Door for big-volume materials loading
Boltfor safe and easy access to the compressing chamber
Four-sided Door for easy tying and baling
CE Certified guarantees trouble-free operation
|
|
Two Hydraulic Cylinders for automatically lifting the chamber door
Ram Guides prevent platen from cocking when the chamber is unevenly loaded
Wide Mouth Feeding Door for big-volume materials loading
Electrical Cabinet includes emergency stop button for easy and safe operation
Lifting Chamber Door promotes work efficiency safely and cuts labor costs
Heavy Duty Platen incorporates special wire-tie guides for quick bale tying with wires or PET belts
CE Certified guarantees trouble-free operation
|
|
High capacity electro-mecanical baler for e.g. cardboard, plastic, big bags:
• Extra wide door opening!
• Pressing plate goes all the way down!
• Less than 2 meters in height!
• Unique door opening system!
• Maximum safety!
|
|
The Harris HBL66-16 comes in both the transportable DT Diesel and stationary Electric models. Designed to process factory clips, skeletons, auto bodies, auto body parts, white goods, and misc. light scrap.
The HBL66-16 baler/logger is the highest performiing machine in its class
|
|
The new Mil-tek multi baler offers much more than the traditional multi chamber baler. At last you can now bale cardboard and plastic at the same time. The Mil-tek multi baler has two pressing chambers which works simultaneously making it the ultimate recycling solution if you want to save time, space, energy and money.
Features
• Save time and space by recycling all your cardboard and plastic in one easy to operate multi-baler
• Unlike twin chamber machines the multi baler has 2 chambers that can bale both materials at the same time
• Recycle up to 90% of your waste
• Reduce your waste costs by up to 80%
• Low energy consumption – One compressor can power both chambers
• Ideal for small to medium retail, manufacturing or wholesale businesses.
|
|
Featuring the patented “Tuck-&-Fold” compression box, which densifies the material before shearing, the Harris BSH shears are available in capacities of up to 2,200 tons. The “Tuck-&-Fold” compression box reduces pre-processing time with no or minimal torch cutting operations, allowing fast feeding and great production. BSH shears are available with throat widths of 3’ to 5’ (.9m to 1.5m).
Other exclusive features include external gib and knife adjustments, Harris cylinders, a wide-open charge hopper for fast loading of irregular scrap, an easy-to-service power pack, and Teflon-protected pistons for minimum friction and more hours of trouble-free operation. It prosesses auto scrap, steel mill scrap, selected freight car and ship sections, shapes, pipe, plate, no. 2 heavy melting scrap, and selected no. 1 heavy melting scrap.
|
|
|
This baler coordinates with horizontal track which connect with paper making machine. It is popular in the paper producing factories.
|
|
|
The Harris Sides-Squeeze baler/logger/shear with 215-tons of ram-face pressure has the most baling force of any 700-ton baler/logger/shear on the market. These Harris manufactured machines include Harris cylinders, external gib and knife adjustment, stall protection, and heavy-duty construction. It can process shearing: miscellaneous scrap, select#1 and #2 scrap, shapes, plate, and pipe. It can process baling/logging: miscellaneous scrap, white goods, auto fenders, factory clips, skeletons and more.
|
|
The Harris Global Shear line of baler/logger/shears is one of Harris' product lines designed to fulfill the requirements of the electric arc furnaces. The GS Shear comes in 900 and 1100 ton shearing capacities. They include a clamshell type box with higher side compression force designed for better trapping. To bale or log, the GS has up to 226 tons of baling force. The GS is equipped with the new Harris advanced hydraulic system utilizing flooded suction pumps and is fast with decreased cycle times and increased productivity.
Other exclusive features include external gib and knife adjustments, Harris cylinders, a wide-open charge hopper for fast loading of irregular scrap, an easy-to-service power pack, and Teflon-protected pistons for minimum friction and more hours of trouble-free operation. It prosesses auto scrap, steel mill scrap, selected freight car and ship sections, shapes, pipe, plate, no. 2 heavy melting scrap, and selected no. 1 heavy melting scrap.
|
|
This baler located in a major retail store helps them to control the large amount of used corrugated cardboards , waste materials and other packing materials . Its wide opening means easy loading for larger size boxes.
Features:
Bale feeding gate opens automatically at the end of each cycle for ‘hands free’ loading.
|
|
BuTech is a manufacturer of scrap baling presses ,scrap shears ,plastic shredders ,special components and parts for various metal industries in its facilities located in Bursa TURKEY
We offer,advice for a solution of your recycling stream, design , development of systems and manufacture of machinery for the recycling industry , installation of the manufactured machines and the service of the supplied machines
|
|
The large, robust HRB - W series balers are the largest two-ram balers available from any manufacturer. The HRB - 1245W, 1445W and 1545W are primarily utilized in MSW high volume applications but are also versatile for fiber, NF metals and other applications. The all NEW HRB - 1035W is the ideal material processor for heavier NF metals, fiber rebales or any application that requires higher shearing and baling forces (higher bale densities) with its 350 tons of force.
Standard Features
* Heavy duty frame assembly
* Main motors of 200HP (149.1 KW) or 300HP (223.7 KW)
* Fully machined baler frame and assemblies
* Non-ferrous floor strips
* Plug Bale compatible
* Touchscreen operator interface terminal (OIT)
* HRB - 1245W, 1445W and 1545W – vertical bale separation door standard
* New HRB – 1035W – option for bale separation door and vertical oversize release door
* New HRB - 1035W’s high efficiency twin 100HP power unit uses 50 - 60% less energy
|
|
HP Series: Standard Features
Harris, the recognized leader in baling technology introduces its new HIGH PERFORMANCE HP Series horizontal balers featuring:
* Energy efficient hydraulics
* Superior structure for durability
* Simplicity for ease of maintenance
* Higher throughputs and densities
* Easy to use controls with multiple program capability
* Enhanced safety features
* Unmatched after sales support through our distributor network
The HP series incorporates the latest structural enhancements for added strength and reliability. As a recognized leader, Harris always strives to produce the most reliable, highest quality machines to give our customers superior value for their investment. At Harris we understand that the value of the investment is measured on how long the machine performs as designed.
|
|
This baler is designed specifically for the baling of all kinds of textile products such as clothes, quilts, cotton rags, etc with large bale weight such as 400kg/bale. Single and double chamber models are available for options.
Features:
The compressing chamber door can be lifted automatically by two cylinders.
|
|
The TG line of ferrous balers is the industry standard for heavy-duty, high production, reliable baling systems. TG Balers compresses material into the charging box with a massive lid and utilizes a three-compression baling system to produce a bale.
Processes
* Slitter coils
* Wire
* Industrial clips & skeletons
* Steel mill sheet
* Automobiles
* Railroad boxcar sides & roofs
* Selected structural steel
* Reinforcing rods
|
|
Developed with an emphasis on economy, the Harris line of ABS shears has proven to be fast and economical, meeting the needs of scrap processors around the world. Offered in 550, 800, and 1000 ton models, the ABS employs a unique concept in design; a pre-compression charging box in which one half of the box opens to accept scrap, and the other half remains rigid with the “Tuck-and-Fold” flipper. All this plus the dependable, heavy-duty construction found in more expensive shears makes the ABS shear a wise choice for any yard.
Other exclusive features include external gib and knife adjustments, Harris cylinders, an easy-to-service power pack, and Teflon-protected pistons for minimum friction and more hours of trouble-free operation. It processes steel mill scrap, shapes, pipes and plate, no. 2 heavy melting scrap, and selected no. 1 heavy melting scrap.
|
|
|
|
|
|
Applications
Neue Herbold GS series guillotines are used for the pre-size reduction of monofilament bales such as from fibre, bands or tapes, tacky film packages, extremely large lumps, start-up purgings or rubber bales.
Design
Neue Herbold GS series guillotines rigid all welded construction. The guillotine knife is mounted in a double sided channel and operates with two oversized hydraulic cylinders which meet the horizontal stator bar. The stator bar is fully adjustable to insure a precise and exact cut of the baled material. The cutting pressure of the guillotine knife can be adjusted to further insure a clean material cut. The material bale length cut can be controlled through a optional hydraulically operated gate.
Advantages
- precise adjustment of the vertical knife
- double sided frame construction
- vertical knife complete enclosed for safety
- fully adjustable stroke, knife speed and cutting pressure
- double sided knife channel
- two cylinder operation to insure true knife operation
|
|
|
|