|
|
TB-200X4T
Breezy Bud, Inc. has devoted itself since its founding to manufacturing high quality industrial blowers and fans. Our customers appreciate our dedication to working with them to produce a blower that meets their requirements.
Our blowers are engineered to run continuously trouble-free. Our blowers have a number of features that contribute to our blower's efficiency and long operating life. Some of these features include high quality materials expertly assembled, ease-of-maintenance, low vibration, and low noise operation. Listed below are some of the types of blowers that we manufacture:
-Casting Multi-Stage Centrifugal Blower
-Casting Single-Stage Centrifugal Blower
-Clean Room Fan
-Conveyor Blower
-Corrosion Resistance Blower (Titanium, Hastelloy, etc)
-Cutter and Trim Blower
-Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
-Gas-Tight Blower
-High Temperature Resistance Blower 900Ž
-Spark Resistance Blower
-Wear Resistance Blower
|
|
KONSOLIDATOR™ Family of Tubular Systems provide everything you need to process industrial wastewater. Whether the stream is 5,000 gallons or 500,000 gallons per day, there is a KONSOLIDATOR™ System that will plug in and solve your wastewater needs:
• Accommodate higher solids concentration
materials via large open flow channel
membrane
• Resist plugging from fibers and bulky
materials and high solids concentrate
• Mechanically clean with spongeballs
(with FEG™ PLUS membranes)
• Tolerate system upsets
• Designed for high strength, heavy duty
industrial applications
• Includes all components needed for reliable
wastewater processing
|
|
The only multi-port commercial valve that uses countercurrent, soft water regeneration right out of the box. Powered by Kinetico's breakthrough lightweight 2%u2033multiport Hydrus™ valve, the Hydrus Series uses up to 40 percent less salt and reduces wastewater by up to 30 percent.
- Simple operation for ease of use
- Modularly expandable, allowing for additional tanks to meet future increased flow requirements
- Elite Smart Start, the most advanced controller on the market today
- High-flow distributors provide minimal pressure loss
- Dual-layer under-bedding improves water distribution, increases salt and -water efficiency, and reduces pressure loss
- Only multi-tank softener system certified to NSF-44 standards
|
|
Res-Kem is a leading manufacturer of industrial water softeners, including various standard and customized systems. Zeo-Tech pre-engineered steel tank valve nest systems for large industrial and municipal applications, non-conventional packed bed systems for critical industrial customers and condensate polishers for industrial boiler water.
- pre-engineered diaphragm valve nest units designed for a variety of applications, ideal for single unit flow rates up to 925 gpm and vitually unlimited flow rates with multiple units.
- Economical and efficient, Res-Kem softeners can be equipped to operate manually, semi or fully-automatically. Regardless of the set up, only limited technical expertise is required for operation.
|
|
A range of compact automatic water softeners to remove hardness and prevent formation of scale deposits.
Process description
Feedwater enters the unit and passes through the ion exchange resin which causes the replacement of calcium and magnesium with sodium to give soft water. Periodically, the exchanged calcium and magnesium are removed from the resin by regeneration using salt solution from the salt container. The regeneration process is fully automatic
Features
- Four standard sizes.
- Simple operation.
- Automatic regeneration.
- Timer control.
- Aesthetic cabinet.
- Integral salt saturator.
- Full after sales support
|
|
Barnstead Water Purification Systems
We offer the market's most complete line of water systems, providing scientists with high purity water for analytical, bioresearch and life science applications. We are water experts, manufacturing water purification products for deionization, distillation, filtration and reverse osmosis.
|
|
|
Barnstead, the Water Experts. Manufacturers of the most complete line of water purification products including deionization, distillation, filtration and reverse osmosis.
|
|
BS EN ISO 3696 Grades I-III
Purite offer a wide range of products to economically produce all types of purified water to a wide range of quality and volume requirements.
Technologies / Processes:
Ion Exchange: Demineralisation, Softening / Organic Scavenging
Membrane Deionisation: Reverse Osmosis, Continuous Electro-Deionisation (CEDi)
Filtration: Carbon Filtration, Physical Filtration, Ultrafiltration
Oxidation / Disinfection: Ultraviolet, Chemical, Heat
|
|
|
The Electric H2O media filtration system is designed to economically improve the efficiencies of water cooled HVAC systems. This filter will remove suspended solids to 5 microns nominally from your system. Media filtration will extend the life and improve the operating efficiencies of your cooling towers, chiller condensers and heat exchangers. Our system complements your chemical treatment program by removing suspended contaminants. A proactive water treatment program that includes our filtration can provide a significant return on your investment.
|
|
five-stage water processing system that offers high-purity water through carbon filtration, softening, reverse osmosis, deionization and ultraviolet sterilization. Complete skid-mounted package provides for daily volumes up to 8,000 gpd.
- Skid-mounted, space saving design allows for easy and trouble-free installation
- Modular configuration can be easily customized for a given application
- Automatic low pressure shut-off protects system by shutting down the pump when line pressure is inadequate
- EverClean® Rinse cleans system membranes with high-quality reverse osmosis water to extend membrane life and improve water quality
- Storage and repressurization systems increase reserve capacity of system
|
|
Sterling, the first name in modern temperature control.
Sterling brings a reputation of quality and unmatched reliability. As the industry leader, we provide the broadest line of Water Temperature Control Systems and Oil-Circulating High Temperature Control Systems.
Sterling also offers a complete line of Air-and-Water Cooled Chillers. This line includes: portable units with 1/2 to 40 ton capacities; central chilling stations with capacities up to 180 tons; full-size cooling towers with capacities to 700 tons; and epoxy-coated pump tanks to 5,000 gallons.
|
|
Industrial drinking water treatment station
Integrated filters on install plate
From 200 l/h to 12 m3/h Flow rate
Low maintenance and easy to fit Strong and reliable unit
|
|
|
|
|
|
Drinking water treatment – take water quality into your own hands.Tried and tested in long-term operation: With Kärcher you can get high-quality drinking water from all fresh water and salt water sources. In this way we ensure reliable water quality in hotels, camping sites, farms and industrial premises.
WPC 100
Up to 2,400 l every day: The Kärcher water treatment system WPC 100 transfoms surface water and raw water from the tap into high-quality drinking water.
WPC 600
Up to 15,000 l drinking water per day: The WPC 600 means high quality. Unlike the WPC 100, this system can even run with brackish water or salt water.
WPC 2500
Up to 60,000 l every day: Kärcher's WPC 2500 system is made for turning brackish water or sea water into larger amounts of drinking water.
WPC 5000
Up to 120,000 l every day: The WPC 5000 makes large amounts of drinking water out of tap water, surface water, and ground water as well as very salty brackish water and sea water.
WPC 10000
The largest Kärcher water treatment system provides up to 240.000 l of drinking water per day. It can be used with raw water of all types as well as salty brackish water and sea water.
|
|
The process is based on the patented and well-proven MinoxTM process. The process has been in use for offshore applications since 1991 and has now been introduced to the conventional industry with low capacity units.
The MinoxTM process gives small, compact and economical systems, also for this application. The most common industrial application for the conventional industry is Deoxygenation of water in cooling circuits, district heat plants etc.
|
|
FTA
Collective and industrial application product
Design to admit 7 m3/h to 1000 m3/h flow rate
Amalgam low pressure lamps
Many possible implementations
|
|
FZI RANGE
Used from 300 l/h to 200 m3/h Suitable for various applications
Low pressure lamps
Meets the most strict standards of dimensioning and design for a complete disinfection of the water intended for human consumption (according to the Ministérielle circular of the Health of January 19, 1987)
|
|
R2DX RANGE
For small space install Treated flow rate from 4 m3/h to 46 m3/h
Low pressure lamps
Meets the most strict standards of dimensioning and design for a complete disinfection of the water intended for human consumption (according to the Ministérielle circular of the Health of January 19, 1987)
|
|
Water Softener FR
Fiber Glass Reinforced Plastic (FGRP) composite vessels are 1/3 the weight of carbon steel, strengths are directly comparable to steel, no maintenance & high aesthetic appearance.
• High performance Composite material
• Thermoplastic liner of polyester – wall thickness 3.8 mm to 7.6 mm as per vessel diameter
• 100 % corrosion resistant
• Excellent bonding between inlet & PE liner
• Better curing at high temperature
• 200 mm to 1,000 mm diameter
• All are top opening & dia 450 mm onwards top & bottom opening
• 450 mm onward flange fitting
• Operating Pressure – 10.5 kgf/cm2
• Operating temperature – 490 C
• 250,000 times cycle test from 10 psi to 150 psi
• Vessels are NSF & PED certified
|
|
WINNI-mat VGX
- Compact single system
- For homes of up to 8 families
- Volume-controlled
- Economy salting
- Disinfection device
- Blending device
- Connection of an external dosing unit possible
- Electronics component with symbols shown in the display
|
|
The Graver Lamella design assures laminar flow conditions that result in hydraulic uniformity and high effluent quality. It permits great reduction in the space needed for clarification equipment, and allows the compact equipment to be located indoors if desired, or to be easily relocated at a later date. It also makes point-source treatment not only feasible, but logical for many applications.
A lamella is a piece of equipment that utilizes inclined plate clarification sedimentation to separate solids from the water and clarify the water. The lamella is composed of a series of removable parallel plates commonly referred to as "lamella plates".
|
|
|
|
|
|
CTV-F2
Cooling Tower Vacuum Filter
Overview
The CTV-F2 Filtration System is specifically designed to work with Goodway's popular
CTV-1500 Cooling Tower Vacuum. In situations where the cooling tower water needs to be cleaned, filtered and returned to the basin, using the CTV-F2 in conjunction with the
CTV-1500 is the only way to go. This carefully engineered unit can handle the high flow and small micron filtration requirements typically encountered when cleaning cooling towers. A pair of reusable filter cartridges allows the operator to clean cooling tower water down to 5 microns. With quick lock lids, filters can be changed out in a matter of seconds. The integrated dolly enables the user to conveniently place the filters, with the Cooling Tower Vacuum, alongside the basin. Clean, filtered water can then discharged back into the tower basin at up to 50 gallons per minute.
Specs
Input Water Pressure: Maximum 30 PSI
at 50 GPM
Filters: Two reusable synthetic,
40 square foot, 5 and 60 micron media
Dimensions: 38" high x 20" wide x 20" deep Weight: 70 lbs net dry
|
|
The PE devices were first sold commercially in 1998. The all-ceramic moving and mating parts of the PE have shown exceptionally low, and even zero wear in high-pressure SWRO brine applications and the material is not susceptible to the pitting and stress corrosion of steel and bronze components in similar applications. The slow rotating PE (1,500 RPM) has proven to be a low maintenance component in commercial desalination plants.
Since the PE transfers energy directly from the brine to the feed without high speed rotating shaft inefficiencies, the PE achieves actual efficiencies of 91 to 95 percent within a broad flow range.
Reduced energy and capital costs mean that for the first time ever it is possible to produce potable water from seawater at a cost below $1 per cubic meter in many locations worldwide.
|
|
Innovation, and invention makes us at GrahamTek Systems a leader in Desalination system design.
The AquaDelfi Water treatment system will be the answer to any rural area without proper infrastructure, or clean drinking water.
Farmers with boreholes, abandoned due to brackish water problems need not to search for expensive alternatives any longer.
Seawater AquaDelfi in production!
Operating Current: 220-380V
Feed TDS: Up to 39000ppm
Product TDS 330ppm
|
|
Drinking water production unit : Potamax
Potamax is a compact drinking water production unit:
Made of stainless steel, with a simple and strong construction.
Potamax is really suitable for emergency situation.
Very simple use that does not require skilled labour.
No mechanical moving parts.
Regular service should be carried out in order to clean the filters and to prepare the coagulation-flocculation and disinfection reaction agents.
|
|
|
GrahamTek Systems is fully geared for the global drive to reclaim water rather than over harvesting our natural recourses. To this end we have designed cutting edge technology which treats secondary effluent to planned indirect potable standards.
|
|
The Graver Lamella design assures laminar flow conditions that result in hydraulic uniformity and high effluent quality. It permits great reduction in the space needed for clarification equipment, and allows the compact equipment to be located indoors if desired, or to be easily relocated at a later date. It also makes point-source treatment not only feasible, but logical for many applications.
A lamella is a piece of equipment that utilizes inclined plate clarification sedimentation to separate solids from the water and clarify the water. The lamella is composed of a series of removable parallel plates commonly referred to as "lamella plates".
|
|
Waste water, sanitary and sewage treatment
Waste water , sanitary and sewage treatment tank called T.E.I.
The T.E.I is designed as package compact, modular and easily movable, used for industrial or sewage water treatment.
The T.E.I is very simple to install, start and operate:
Few civil work required
Erection and start-up taking less than a week, the T.E.I reduces costs compared with conventional systems.
The stainless steel construction makes the T.E.I a durable installation.
Designed as a self operating unit, the T.E.I is very suitable for emergency situation.
|
|
Short description :
Softeners remove unwanted minerals that make water hard. We offer these in three sizes to provide the correct capacity machine to your situation.
|
|
Rösler Process Water Recycling Systems can be connected to virtually any vibratory finishing machine. This increases the savings potential of vibratory finishing. Most vibratory finishing processes such as de-burring, precision grinding, rough grinding, radiussing or polishing are wet processes. Water and cleaning agents (compounds) are the carriers for resultant removal of media and metal fines.
The resultant process water is completely recycled via a closed-loop system . Water and compound savings contribute to significant cost reductions . The system technology is based on special centrifugal technology with an acceleration factor of up to 2000 g, coupled with environmentally-friendly chemistry developed in-house.
Rösler Process-Water Circulation Systems can be adapted to any vibratory finishing application. Semi- and fully-automatic centrifugal systems are available.
Rosler centrifuges are the most popular waste water treatment systems in the world.
|
|
|
|
