|
|
|
MultiCam CNC WaterJet cutters are legendary for their ease-of-use and versatility. Successful companies around the world rely on MultiCam water jets to automate production in countless different industries. MultiCam offers both nonabrasive and abrasive water jet cutting systems and three product lines to fit your specific application. The 1000 Series is a cost effective nonabrasive waterjet cutting solution. The 4000 and 6000 Series machines are heavy duty, high-precision cutting systems that can be configured for nonabrasive and abrasive waterjet cutting. All MultiCam WaterJets are powered by KMT Waterjet Intensifiers. MultiCam manufactures a WaterJet cutter to fit your needs. To learn more about MultiCam's CNC Water Jet systems click the navigation to the left or an image below.
|
|
Versatile water-jet cutting system for complex cutting tasks
Guide Machine Features
height scanner with integrated collision guard, and a bilaterally driven and guided gantry ensure high
cutting quality and short processing times
sturdy high-precision CNC guide machine, especially designed for continuous water-jet operation
CNC-controlled abrasive material supply - the abrasive sand is precisely metered and fed without pressure
DC servo motors with zero-backlash gears and precise linear guides on all three axes
electronic height-control maintains consistent distance between the water-jet nozzle and the part
available from entry-level models with 2 controlled axes up to the high-end model with 5 axes for
complex chamfering processes
|
|
|
AquaCut plants with double-sided longitudinal drive are propelled over precise, chromium plated linear systems and racks with pinions free from play. With the CNC Wasserstrahlschneidanlagen AquaCut can be separated in connection with a high-pressure pump, either with PUR-water or Abrasivschneidtechnologie, almost all materials without thermal load.
|
|
|
The WaterCut is particularly developed for continous use with water jet cutting a robust and very precise CNC Führungsmaschine in portal building method. The high dynamics of the plant are translated by a deeply set machine portal, digital DC servo actuators, stainless linear guidance precise with transmission free from play and in all three axles. In connection with a hp pump can be cut with the WaterCut all metals, hard rock, marble, bullet-proof glass, ceramic(s), plastics, cardboard, foam materials, as well as composite materials.
|
|
|
A very important factor for cutting edge quality is the accuracy and stability of the abrasive flow rate. The Accustream Regulator II is designed to ensure peak cutting performance. The regulators II's compact abrasive metering system delivers the precise amount of abrasive needed to the cutting head at maximum speed. The system is positioned close to the waterjet cutting head which decreases the distance the abrasive travels and guarantees a smooth cut, while curtailing the abrasive that is wasted on inefficient cutting.
|
|
Abrasive Mini Hopper System
The abrasive hose from the Mini Hopper to the cutting head is very short so you have a very constant abrasive flow which causes about 20% faster cutting with higher cutting quality.
Abrasiv medium container with 200Kg abrasive is up to 10 Meter away from the Mini Hopper. Under the Abrasiv medium container is the small fully autonomous Pressure Hopper which takes the abrasive to the Mini Hopper near the cutting head.
You can refill the Abrasiv medium container at any time because the Abrasiv medium container is not under pressure like on compare able systems!
What counts!
* 20% faster cutting
* high cutting quality
* few components
* no pressure in Abrasiv medium container
* autonomous refill
* small wear
|
|
In order to optimise the cutting speed and quality Resato offers an electronic abrasive feeder system, mounted on the portal of the cutting table close to the cutting head. This system guarantees a reliable and continuously adjustable abrasive flow rate to the cutting head.
The abrasive flow can be controlled from the CNC control panel and can be adjusted during the cutting process. The system offers possibilities to directly and automatically set the abrasive flow rate supplied to the cutting head from the Resato Powercam cutting software. The flow rate is adjustable from 100 to 1000 grams per minute.
The system also offers the possibility to automatically switch from a low abrasive rate to a high rate. This can be important for materials like glass, for which a low pressure must pierce the glass at a low abrasive flow rate. The flow rate can then be increased at the start of the cutting movement.
|
|
Abrasive feeding system
SAEB ERAKAT models ABRALINE
A reliable and functional solution:
The industrial applications require more and more a control of the costs and an optimum reliability. With SAEB ERAKAT, you can supply the machine of cutting permanently and thus avoid all stops of production related to the recharging of sand.
A technology with any test:
SAEB ERAKAT is the perfect system to feed the system of Abrasif cutting uninterrupted. It allows an autonomy of 400 kg and the supply pressure in air perhaps regulated thanks to the valve of regulation of air pressure.
It also supervises the presence of sand in the hopper and the pot under pressure and emits signals of warnings visual (indicator) and messages intended for the operator.
Safety:
SAEB ERAKAT automatically stops the machine of cutting in the event of lack of abrasive (if connection is carried out) or warns the operator with a twinkling light signal. This makes it possible to avoid with the operator carrying out cycles of cutting without abrasive.
Simple installation:
SAEB ERAKAT Abraline model is a complete and autonomous system which can be connected to any machine of abrasive cutting. Its simple connection (catch 220V) and its box of piloting allows an easy use.
A strong point: Facility of use:
The use of the machines of abrasive cutting requires the control of many parameter and a regular maintenance.
With SAEB ERAKAT the user does not have any operation of maintenance, nor of parameter to be carried out. It is enough for him to reload every 400 kg of abrasive, enabling him thus to concentrate on its machine and the production.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
