- Environment - Health - Safety >
- Air Treatment and Noise Management >
- Waterproof fan
Waterproof fans
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Air flow: 35 m³/h - 850 m³/h
Noise level: 48 dB - 71 dB
New design, unaltered quality Kryos³ GS filters fans, for the ventilation of electrical enclosures, are the optimal solution when the ambient temperature is lower than the temperature inside the cabinet, and can be installed, ...
Air flow: 500 m³/h - 1,870 m³/h
Noise level: 52 dB - 63 dB
... radial fans on KryosROOF provide high flow rates and heads to ensure the correct airflow within the cabinet. In addition, there is a high efficiency version with EC fans and an active control probe, ...
Air flow: 6,500, 5,840, 6,700 m³/h
Rotational speed: 1,600, 1,420 rpm
Noise level: 61 dB - 73 dB
... aerodynamic design of the fan blades • Highly efficient, energy-saving axial fans featuring GreenTech EC technology and standardised integration of control functions and sensor signals • Wide range ...
ebm-papst
Air flow: 0 ft³/min - 98.8 ft³/min
... which has an effect on the equipment. The Stall Alarm type fans output an alarm when the fan stops. This allows quick detection of defective stops to allow the cooling fan to be replaced. Axial ...
ORIENTAL MOTOR
Air flow: 0.18 m³/min - 15.46 m³/min
Splash Proof Fan Series - San Ace 9W provides Air flow of 0.183m3/min (6.5CFM) to 15.46m3/min (546CFM). Size of 40mm square to 140mm square and diameter 172mm side cut. It features PWM control, pulse sensor, lock sensor ...
SANYO DENKI EUROPE
Air flow: 1.77 m³/min - 23.5 m³/min
Providing great air flow range from 1.77m3/min up to 23.5m3/min, the Splash Proof Centrifugal Fan Series are widely used in operations involving information and communication devices, servers, storage and heat exchangers. ...
SANYO DENKI EUROPE
Air flow: 0.2 m³/min - 3.34 m³/min
This oil proof fan series 24 VDC has an air flow of 0.195 m3/min (6.9 CFM) to 3.34 m3/min (118 CFM) and can function in oil-mist environment. It measures 40mm square / 60mm square / 80mm square / 92mm square / 120mm square ...
SANYO DENKI EUROPE
Air flow: 70 m³/h
... packaging for faster assembly The PFA 20.000 is an exhaust filter which employs the same design as the manufacturer's filter fans. The filter is built with a snap fastener and a door which can be mounted without screws. ...
PFANNENBERG
Air flow: 5,000 m³/h - 20,000 m³/h
Noise level: 70 dB - 82 dB
... micro-organisms and germination). To meet the expectations of farmers, grain producers, storage organizations and offer them suitable fans, it is essential to take their needs into account: robustness, ease of use, ...
Air flow: 11,000 m³/h
... WS) provides extremely low noise values with a space-saving, sound-absorbing perforated plate coating at concise points. The fans are only suitable for indoor installation. Impellers Aluminium sheet impellers (ALMg3) ...
Rosenberg Ventilatoren GmbH
Air flow: 13,400 m³/h
Diameter: 225 mm - 560 mm
Properties • highly efficient EC technology • compact design • backward curved impellers • feet can be offset by 90° • variable discharge direction • integrated control system (EC controller) • speed is 100% infinitely variable Casing Casings ...
Rosenberg Ventilatoren GmbH
Air flow: 15,000, 12,000 m³/h
Diameter: 180 mm - 400 mm
Properties • flow rates up to 15,000 m³/h • size: 180 - 400 mm (impeller diameter) • casing made of galvanised sheet steel • asynchronous external rotor motor • forward curved impellers • feet can be offset by 90° • protection ...
Rosenberg Ventilatoren GmbH
Air flow: 24,500 m³/h
... commissioning Motor concepts: External rotor motors: ECblue EC technology with integrated controller matched to the fan AC technology
ZIEHL-ABEGG
Air flow: 200 m³/h - 750 m³/h
Diameter: 108 mm - 200 mm
ECOFIT Single inlet centrifugal fans AC single phase motor Forward impeller galvanized steel or plastic, Impeller diameter of 108 up to 200mm, AC single phase capacitor external rotor motor 230V50/60Hz and 120V50/60Hz, Plastic, ...
ROSENBERG VENDÔME
New ECOFIT centrifugal backward fans Their blades are specially designed to: improve the ventilation efficiency and save energy improve the acoustic comfort
ROSENBERG VENDÔME
Air flow: 95 m³/h - 415 m³/h
Rotational speed: 1,073 rpm - 3,515 rpm
The EC technology is now available on the smallest diameters of ECOFIT TRE, GRE and GDR fans. Thanks to the compact EC F5 motor, TRE/GRE of diameter 120 and 140 and GDR of diameter 120 have now the advantages of the ...
ROSENBERG VENDÔME
Air flow: 24 m³/h
The filter fans are required to ventilate your electrical and electronic equipment and protect them from dirt and dust thanks to its integrated filter. They are easily mounted on the side wall of the cabinet. It is ...
EURODIFROID
Air flow: 55 m³/h
The filter fans are required to ventilate your electrical and electronic equipment and protect them from dirt and dust thanks to its integrated filter. They are easily mounted on the side wall of the cabinet. It is ...
EURODIFROID
Air flow: 110 m³/h
The filter fans are required to ventilate your electrical and electronic equipment and protect them from dirt and dust thanks to its integrated filter. They are easily mounted on the side wall of the cabinet. It is ...
EURODIFROID
Air flow: 5.43 m³/h - 6.45 m³/h
Professional fan MASTER DFX 20 Air flow: 5.430/6.450 m3/h Main features: - Robust, plastic rotomoulded casing - Easy to use and transport - High air flow - Axial fan - 2 speeds - The fan ...
Air flow: 90,000 m³/h
Diameter: 200 cm
Rotational speed: 285 rpm
SUNON Portable HVLS Fan is designed to be easily move by a person through the work areas. 2M fan generates powerful airflow to enhance better ventilation and reduce human body temperature. Using SUNON ...
Air flow: 7,040 m³/h - 47,780 m³/h
Rotational speed: 945 rpm - 2,840 rpm
Noise level: 51 dB - 70 dB
Dynamic wall mounted extractor fans with motorised hatch, for smoke exhaust in case of fires, 400 °C/2h and 300 °C/2h Dynamic wall extractor fans with motorised opening system and protective grating ...
SODECA
Air flow: 527 m³/h - 3,024 m³/h
Rotational speed: 1,460 rpm - 3,540 rpm
Noise level: 38, 45, 49, 52, 42 dB
... surface control and a series of filtration units for circular ducts. Fan: • Acoustic casing covered with sound absorbing material. • Standardised inlet and outlet flanges with watertight joints. • ...
SODECA
Air flow: 7,050 m³/h - 47,955 m³/h
Rotational speed: 970 rpm - 2,880 rpm
Noise level: 73 dB - 92 dB
Dynamic wall mount extractor fans fitted with motorised hatch Dynamic wall extractor fans with motorised opening system and protective grating for use without extract duct. Suitable for installation ...
SODECA
Air flow: 250 m³/h - 3,000 m³/h
The J series of exhaust fans is especially engineered for use in ATEX categorized zones. The fans are manufactured in diverse versions, each optimized for use in zones with dust-prone environs or dust ...
Air flow: 250 m³/h - 3,000 m³/h
Centrifugal exhaust-fans are intended particularly for source - capture and are completely adaptable to the EP Series arm line or with the EG and EK arm series by utilizing an adapter flange. These fans ...
Air flow: 21,000 m³/h - 39,800 m³/h
This type of fans provide significant air flows for the extraction and/or ventilation of industrial, livestock or agricultural premises. Main features - Air flow from 21,000 m3/h to 39,800 m3/h - Structure and overpressure ...
Air flow: 100 m³/h - 450 m³/h
Rotational speed: 2,900, 1,450 rpm
Noise level: 45 dB - 67 dB
Produced completely by injection moulding.Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating ...
PLASTIFER
Air flow: 500 m³/h - 1,600 m³/h
Rotational speed: 1,450, 950, 2,900 rpm
Noise level: 57, 45, 70 dB
Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating ...
PLASTIFER
Air flow: 720 m³/h - 2,000 m³/h
Extract Fan Low Pressure Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically ...
PLASTIFER
Air flow: 50 m³/h - 13,000 m³/h
DUCT FANS are mostly used in low-to medium-pressure ducted systems with additional components such as heaters, filter boxes, dampers, etc. • Rectangular or round connection • Airflow up to 15.900 m3/h • High-efficiency ...
Air flow: 100 m³/h - 19,000 m³/h
Centrifugal fans with forward curved blades in galvanised sheet metal Extraction of air which is clean or with a low volume of particulates, exhaust gases, welding fumes, etc. - Structure: The structure of the extraction ...
Centrifugal fan with forward curved blades in galvanised sheet metal Extraction of air with a low volumes of particulate, exhaust gases, welding fumes, etc. - Structure: The structure of the extraction fan ...
Air flow: 470 m³/h - 24,200 m³/h
Centrifugal fans with backward curved blades in thick steel sheet metal Extraction of air with a high volumes of particulate, exhaust gases, welding fumes, etc. - Structure: The structure of the extraction fan ...
Air flow: 0 m³/h - 9,000 m³/h
... forward curved blades – double inlet High performance centrifugal fan The fan ranges TEM offered by Nicotra Gebhardt do present a large fan programme of single inlet centrifugal fans ...
Nicotra Gebhardt
Air flow: 2,050 m³/h - 23,200 m³/h
DUCT FAN TYPE - K - Fan housing is equipped with bilateral rolled flanges containing connecting holes. - Fans designed to create flow of air and other chemically inert agents. - Designed ...
Planetfan
Air flow: 3,780 m³/h - 45,800 m³/h
HIGH-TEMPERATURE FAN TYPE: KD - Equipped with two-speed motors to allow controlling of the flow parameters of the fan. - Fans designed to create flow of air and other chemically inert ...
Planetfan
Air flow: 1,350 m³/h - 7,500 m³/h
... -term operation of the fans without any failures; - availability in all installation position; - standard operating temperature: -20 to +80 °C; - range of motor power: 0,55 - 11,0 kW. - impellers and fan ...
Planetfan
Air flow: 420 m³/h - 620 m³/h
Noise level: 63 dB - 64 dB
... limited space on the front and side panels. According to the ambient conditions these units can operated with fan (forced air) or without a fan (natural air convection). • The structure of the TP Series ...
Fandis
Air flow: 180 m³/h - 5,330 m³/h
Diameter: 100 mm - 400 mm
Rotational speed: 1,150 rpm - 2,710 rpm
Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 160 to 2000 models) or with metal casing steel finished in a tough epoxy-polyester paint coating (for models 4000 and 6000). The ...
Soler & Palau
Air flow: 1,016, 1,321, 1,133 m³/h
Diameter: 200, 315, 250 mm
Rotational speed: 2,450, 2,600, 2,630 rpm
... -line mixed flow duct explosion proof fans. TD-800 Ex is manufactured in antistatic plastic material. The others models are manufactured from sheet steel protected with black polyester paint coating. Detachable fan ...
Soler & Palau
Air flow: 294 m³/h - 3,889 m³/h
Diameter: 100 mm - 400 mm
Rotational speed: 1,370 rpm - 2,846 rpm
Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a prewired wiring junction box and a robust mounting foot. All model include ...
Soler & Palau
Air flow: 3,000 m³/h - 28,000 m³/h
Diameter: 400 mm - 1,250 mm
Rotational speed: 270 rpm - 1,440 rpm
... sheet by molding. The motor is outdoor type with protection class IP 55 (or 56) and insulation class F (or H), fully sealed and waterproof. The air duct is made of high strength carbon structure steel ...
ERG Technology
Air flow: 0.014 m³/s - 0.059 m³/s
Diameter: 125 mm
Rotational speed: 2,690 rpm
... efficient external rotor motors; matched to the aerodynamic performance of the impeller. Motors have sealed for life ball bearings to enable the fan to be mounted at any angle. Motors are protected to ...
ELTA FANS
Air flow: 0.33, 0.273, 0.221 m³/s
Diameter: 250 mm
Rotational speed: 1,460 rpm
Plate Mounted Axial Flow Fan • Standard size 250mm • Air volume flow rates up to 0.33 m3/s • Static pressures up to 63 Pa • Highly efficient, lightweight induction motors • Fully speed controllable • Suitable for ...
ELTA FANS
Air flow: 0.679, 0.602, 0.523, 0.411 m³/s
Diameter: 350 mm
Rotational speed: 1,360 rpm
Plate Mounted Axial Flow Fan • Standard size 350mm • Air volume flow rates up to 0.679 m3/s • Static pressures up to 95 Pa • Highly efficient, lightweight induction motors • Fully speed controllable • Suitable for ...
ELTA FANS
Air flow: 9,101 m³/h - 29,986 m³/h
Rotational speed: 970 rpm - 1,460 rpm
... frequency converter 20-50 Hz. • The temperature in the fan motor is monitored by PTC thermistors. The PTC thermistors must be connected to a release system, that permanently disconnects the fan from ...
MAICO Ventilatoren
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining