|
|
For all activities, our indicator range give you many possibilities.
Laid on table, with column kit or wall mounting kit, our indicators are easy to use and very reliable.
The whole range is available either in stainless steel or in resin and can be connected to all Precia Molen load receptors.
I 100 indicator
Indicators range I 200
Indicators range I 200 Ex
Indicators range I 300
I 400: Programmable weighing indicator
High performance weighing system with industrial field buses interface
|
|
Typical applications may be: - Hopper weighing and batching systems - Road and rail weighing platforms - Conveyour scales, weigh feeders and blending sysMAIN
FEATURES :
- Power supply up to 6 load cells
- Optoisolated RS232 and RS485 serial ports
- Optoisolated 4 - 20 mA analog output
- Failure alarm hardware output
- High/low alarm hardware outputs
- Tare set/reset inputs
- Optoisolation of all digital input/output
- Stand-stil signal and peak value measurement
- Periodic selfcorrection of thermal drifts
- Optional local Key-board/display
tems - Silo level measurement and alarms
|
|
TRANSMITTERS
AST 3P / AST 3IS
Analogue output ±10 VDC, 0-20 or 4-20 mA. Digital output RS-485, MODBUS and via GATE 3 fieldbus communication.
WST 3
Analogue output ± 10 VDC, 0–20 or 4–20 mA. Serial communications: RS-485, MODBUS RTU protocol. Fieldbus interface: Profibus DP.
|
|
T010E is a weight transmitter amplifier that uses a modern microcontroller. Four push buttons and one display that shows the guide messages, help the operator in the configuration and weight calibration.
T010E is an instrument with high modularity. The base configuration is equipped with a display to show the weight data and two relays thresholds can be programmed as required. The options foresees one serial line available in RS232 or in RS485 mode, a radio transmission for remote data weight transfer (with R010E serial repeater), an analog output 0-10 V or an analog output 4-20 mA.
In the overload control modality (option) the instrument can be associated to category 1 as a security device (UNI EN 954-1 12-98 norm). The smaller dimensions, the best ratio quality price, make the T010E the best solution for many applications.
|
|
Industrial bus: Profibus DP
Accuracy class: 0,01 %
Insignal range: -4 - +4 mV/V
Loadcell Excitation: 5 VDC
Lastcellsström: Max 100 mA
Conversion rate: 3.25 - 30 conversions/s
Counts: -25 000 - +25 000
Internal counts: -400 000 - +400 000
Power supply: 24 VDC
Cabinet: Shielded metal cabinet
Mounting: DIN-rail (TS35)
|
|
|
|
|
|
TRANSMITTERS
JA - FIELD RANGABLE ANALOG TRANSMITTER
APPLICATIONS
-Strain Gage Measurements
- Load Cells
- Force Transducers
- Torque Transducers
- Pressure Transducer
- Transducer Interface To PLC/DCS
- Process Control
- Weighing Systems
- Level Monitoring and Control
- Intrinsically Safe Applications
- Cost Effective OEM/VAR Solutions
FEATURES
- High Performance Measurements-Grade Power Supply And Precision Amplifier
- Range Of Selectable Output Formats For Voltage Or Current
- Input, Output, Excitation And Zero Offset Parameters Are Field Configurable
- Compatible With Single Or Multiple "Summed" Transducers
- Preload Offsets Adjustable Up To 100% of Span Range
- Linear Optical Isolation Of The Input, Output And Power Supply Eliminates
- Loop Potential, Provides Common Mode Rejection And Reduces Noise Pickup
- Remote Sensing Is Selectable And Maintains Constant Voltage At the Transducer(s)
- DIN Rail Or Panel Mount Using Industry Standard Plug-N-Play 11-Pin Socket
- No Interaction Between Zero And Span
- Designed For Use In "Electrically Noisy" Industrial Environments
- Functional Test/System Calibration Pushbutton
- Easy Setup And Calibration
- Multiple LED's Monitor Input And Output Signal Levels
- Powers Up To (4) 350 Ohm And Up To (8) 700 Ohm Transducers
- Compact Case Dimensions Of Only 2.75" High X 2.38" Wide X 1.75" Deep
- The JB Series is A "Summing Transmitter" Version Integrated With A Four Channel
- Summing Module In A NEMA 4/4X Enclosure
- NEMA 4/4X And Explosion-Proof Housings Are Available
- The JD Series Is A Low Cost "Fixed Range" Alternative To The "Rangeable" JA Series
- One Year Warranty
|
|
Axle Weigher
The Yamato Axle Weigher is installed in highway tollbooth approach lanes and automatically checks the individual axle in motion against presettable limits giving both signal and warning of a violation.
The vehicle total gross weight is also calculated and displayed.
|
|
|
|
|
|
Modular in design, ASGCO Weigh Belt Scale performs in a wide variety of conveyor styles and structures in English or metric. Versatile ASGCO Weigh Belt Scale installs in series to create a 2 or 3 idler weigh bridge - minimum of 2 load cells.
- Easy to Install - ASGCO Weigh Belt Scale which typically takes less than 2 hours for complete installation and start up!
- Virtually Maintenance Free - because its low profile minimizes build-up areas where dust and dirt accumulate.
- User Friendly Software Powers the ASGCO Totalizer - requiring input of only 5 field parameters before initial calibration.
- The Totalizer is Automated - because belt length and speed are automatically calculated and entered.
- Totalizer Provides a Wide Variety of Outputs - to drive printers, chart recorders, PLC devices and controllers.
- ASGCO Weigh Belt Scale is Simple - consisting of a speed sensor standard encoder - no expensive housings or assemblies
- A wide selection of Options are Available: wheel mount kit for speed sensor, cross tube kit for heavy duty / high belt loading applications, low capacity load cells for light duty applications and field wiring installation kits.
|
|
Counting-/ Weighing Table ZWT :
Ergonomic counting-/weighing table.
With conveyor or tilting bowl.
Robust industry load cell integrated.
Desired value - default in weight or in pieces.
Throughput: approx. 20 cycles/min.
Accuracy: 0,5 g
Load: up to 3 kg
|
|
1 apparatus = 3 capacities of lifting.
Conceived for the measurement and the control of loads.
Portable, light, with triple scale of reading, bill-poster LCD of 25 mm to 6 digits, keyboard seals with 4 keys, automatic waking state, precision + 0.03% on the most precise scale, manilles galvanized, Indice of protection IP 54, infra-red remote control .....
Available on request:
Professional range: of 150 kg to 9 tons, version stainless with protection IP 65 and version for crane
Range high capacity: from 12 to 55 tons
Range ATEX: of 600 kg to 35 tons
|
|
Has been designed for electronic weighing systems using strain-gage load cells. - Hopper and silos weighing - Platform scales - Batching and weighing systems - Weighing for intrinsically safe installations.
MAIN FEATURES :
- Heavy duty and small size construction
- Corner correction trimmers
- Six wire extension cable terminal board
|
|
For new conveyor installations or retrofit existing conveyors. Weigh Legs have adjustable height and capacities from 250 to 1,000 lb per Weigh Leg frame.
Weigh legs allow you to save steps and increase productivity with in-line weight measurement and checkweighing.
The Weigh Leg frame is an integrated assembly, incorporating two supporting legs, two Weigh Bars, junction box and cabling. The finish is a heat-fused powder paint, which provides a high level of corrosion protection.
|
|
|
|
|
|
BI 300 - SELF-SERVICE UNITS
Metrological approval
Test certificate LNE 03-03.
Mentioned in CE approval certificate type X201-A. n° F-01-A-005.
European directives
Directive 90/384/CEE relating to No-automatic weighing instruments.
Directive 89/336/CEE relating to ElectroMagnetic Compatibility.
Directive 73/23/CEE relating to Low Voltage equipment.
Application
The BI 300 range are self service consoles is a new generation of driver operated weighing systems based on many years of in-depth experience.
The key advantage of the BI 300 is the speed and flexibility it brings to the whole driver operated weighing operation.
The standard design of the BI 300 effectively acts as a extremely versatile intelligent hub specifically designed for weighbridge operations, this allows.
The BI 300 to interface to a wide variety of peripheral equipment such as printers, traffic lights, barriers RFID or barcode badges. The BI 300 is ideally suited for connection to a host computer system to form an integral part of a management information system.
|
|
|
|
|
|
METTLER TOLEDO manufactures and markets a wide range of industrial scale terminals to meet the weighing needs of almost any industry and any application.
Looking to the Future
They range from simple, easy-to-use terminals for straight weighing applications to advanced instruments that can accumulate data, control systems, operate peripheral equipment, communicate with computers, monitor scales and much more. No matter how simple or complex the application, all METTLER TOLEDO industrial scale terminals offer the highest degree of performance, accuracy and reliability available on the market.
As technological innovations continue to revolutionize all industries and issues such as total cost of ownership, return on investment, and ease of integration become more important, METTLER TOLEDO remains committed to developing scale terminals that meet our customers' changing needs today and tomorrow. Already, METTLER TOLEDO is establishing itself as a leader with the introduction of Internet-enabled scale terminals and other terminals that incorporate the leading technologies and offer open connectivity.
|
|
Used for products with regular or irregular granulometry, like confectionery, pasta, vegetables, cut products, dried fruits, coffe, seeds, dried vegetables, etc.
IN A LINE
ELECTRONIC WEIGHING SYSTEM WITH 1 TO 4 HEADS IN A LINE.
In automatic versions to fit onto a bagging machine, or semiautomatic versions with a stand and working table.
FEATURES
Pneumatically actuated
Number of heads: one, two, three or four
Number of shakers: one, two, or three per lane.
CONTROL: Electronic with microprocessor. Data key-in using bagging machine keypad. Pre-dosage with fine-tuning with independent speeds, for the shakers and belt.
OPERATIONS:
Pre-bowl (accumulation to advance weighing). Automatic tare weight setting. Automatic weighing correction. Chute end management. Fine-tuning repetition. Memory for 20 different settings. Weight display on screen (built-in on Eva-260). Poss. vary discharge per cycle. Production statistics (totals). RS232 Printer output. Fast and tool-less bowl removal for cleaning.
|
|
- A compact measuring device for weighing loads during lifting.
- Appropriate tackle can be attached to assist in the lifting and weighing.
- The crane weighters have a liquid crystal display(LCD),which can tare as well as show either the gross or net loads.
- It also indicates the load protection at 110% of the gross weight and the status of the battery.
- Conforms to CE safety standard.
|
|
RON Industrial crane scales are used for weighing during lifting and for overload prevention.
The RON 3025 series are compact crane weighers and digital crane scales.
The RON 3025 digital crane scale has a robust extruded aluminum body. Absolutely no castings in the unit.
The digital crane scale's large LCD display can be read at a considerable distance, even in sunlight.
The compact dimensions of the crane weighers ensure minimum headroom loss.
All digital crane scales are factory-tested and supplied with a test certificate, including a fully traceable calibration chart.
2000 hour battery life - applicable to all RON crane scale, dynamometer and load cell series and load cells with built-in amplifier:
RON Crane Scales excel in high quality, are based on the latest technologies and comply with the strictest safety standards.
All RON Crane Scales are made of the highest quality, aerospace steel.
|
|
Crane weighers
Measuring range 0 - 12 t
The crane weighers TKA and TWF are compact measuring devices for the weighing of loads.
- with digital display model TKA
Features
- High accuracy
- Lightweight design
- Easy-to-read display
- Easy to use
- Excellent quality
- Robust design
- Housing swivelling 180°
- Retains the peak value to memory
- Rechargeable, with integrated storage battery
|
|
Scope of use
Batching of loose and granulated articles like: coffee, rise, sweets, buttons, dumplings, etc. Ready to integration with all types of pneumatic packaging machines. Can work like free-standing weigher for batching into premade bags.
Operation principle
Combination weigher calculates out numerous combinations to meet closest to target product portion from various heads.
The computer adds up the weight data received from each weigh bucket, calculates out numerous combinations meet the set deviation from target weight, and then selects the one closest to the target weight.
possibilities of different batchers configuration. Touching ponds 10,4 c – independent establishing of amplitude line conveyors, PC batching, possibility of seqence drop.
|
|
Our range of optional machinery for weighing and dosing products to be fed into packaging machines.
ILAPAK's series of high quality multi-head weighers are tailored to each customer?s products, to consistently and precisely weigh across a very wide range of weights and speeds.
The 10 head range of Weightronic is ideally suited for simple, low/medium output applications for both wet or dry products.
|
|
Simple Batrix Weighing of balance and platform
3000 levels Except legal metrology
Our range of indicators offers to you a vast choice for all the activities of weighing.
Conceived to be used in any situation they can be posed on a table, fixed at the wall or assembled on column and are for the majority available is out of resin or out of stainless and naturally they can be connected to all our range of receivers of load.
|
|
Profile:
Founded in 1967, Setra Systems, Inc. is a leading designer and manufacturer of pressure, acceleration, and weight sensing devices. Setra has devoted its engineering and research efforts to the development of transducers and systems based on the highly accurate variable capacitive transduction principle. Setra Systems was acquired in December 2001 by Gems Sensors of Plainville, Connecticut. Gems Sensors designs, manufactures and markets liquid level, flow and pressure sensors and controls and is a division of the Danaher Industrial Controls Group since 2004.
Products:
Process Automation & Sensing Controls: Sensors: Accelerometers, Digital Displays, Weigh Systems, Digital Manometers, Transducers
Digital Systems,
|
|
CAN-DY (Field Bus load cell Transmitter)
> Digital transmitter for 1 to 4 load cells of 350 W
> IP 66 plastic box
> 2 operating modes :
- RS 485 output modbus protocole
- CAN network output - CAN OPEN protocole
> With CAN network configuration, CHAINDY option is available
> Possibility to connect on the same Bus 13 CANDY transmitters
(Modbus, Profibus, Device Net, Ethernet)
|
|
By choosing the balances and rockers Arpège Master K you have the guarantee of a large manufacturer who has of legal approvals and certifications necessary, his own research departments and means of production in Europe and Asia to remain with the point of the performance and quality at competitive prices
Balance of Tablier table out of stainless
315 mm * 315 mm
400 mm * 500 mm
|
|
Weighing hopper
For the weighing and the storage of various products
INDUSTRIAL materials of crushing, mixes, handling, storage, proportioning, sifting and bagging
|
|
BA 4 Receiver of load to 4 sensors painted steel Base and apron
BA 4 Receiving stainless of load to 4 sensors stainless Base and apron
|
|
|
These quality portable beam scales are designed specifically for industrial applications, warehouses and terminals. Ideal for heavy use applications. The HB-1000 is available with H44 Class III "Legal for Trade" for point of sale use subject to on-site verification by local Weights and Measures jurisdications. HB Series scales are constructed of heavy duty cast iron with corrosion resistant loops, bearings and nose irons. Wheels make the scale easy to move and relocate to accomodate alternative work sites. Beams are graduated on the front and rear with weight indicated at the center of the poise.
|
|
General Characteristics:
ICM (intelligent Calibration mode), automatic recognition of external calibration weights.
Anti-theft lock code
Password protection for stored programs
Clock with date and time
Logging of the measuring results in conformance with ISO and GLP
Configurable printing protocol
RS232/V24 / Precisa-Bus Interface
Capacity display
Stored user configuration (UMM - user menu Memorized)
Protective cover
User-friendly multi-function terminal standard on this line
Keypad (10 keys)
4 directly programmable function keys (freely selectable)
Add-on alphanumeric Keypad (30 keys), 'Smartbox' is built-in on ISK models
Lo-Go-Hi visual indicator lights (red/green/yellow)
|
|
Ideal for food service and portion control applications, these economical table top scales can also be found in the home, office or on the production floor. Scales feature a temperature compensated dual spring for precision measurement even under adverse conditions. Dual support posts ensure good platform stability. The slanted dial is easy to read and even easier to maintain. Dials feature a shatter-resistant acrylic window with high contrast lines for easy reading at long distances. Tare up to 10% of the scale's capacity. Available with standard flat platform or optional galvanized spider scoop. Rust-resistant components. Single and dual dial graduations in avoirdupois or metric reading.
|
|
Conveyor beltweighers weigh and control continuous flows of bulk materials accurately and without inconvenient interruption.
Careful adaptation to the respective product characteristics is the basis for repeatable results.
• Flexible product range for almost all common belt widths; designs for use in legal metrology also available
• Adjustment, batching and loading control extend the field of application and provide optimized product flow and handling
|
|
|
|