|
|
- Handheld Readouts.
- Made from a Lightweight Aerospace Alloy.
- Available Hermetically sealed for use in wet conditions.
- Tare, Peak and Reset facility.
- Units have a 5 metre cable close coupled to a 4 digit 15mm LCD display.
- All units are calibrated to comply with ISO 7500-1: 2004.
- The accuracy of the cells are better than 1% of applied load.
- The power source is a 9V PP3 battery, can be supplied for
mains power if required (240v).
- 12 Month Guarantee, subject to conditions.
- Complete with carry case. |
|
For all activities, our indicator range give you many possibilities.
Laid on table, with column kit or wall mounting kit, our indicators are easy to use and very reliable.
The whole range is available either in stainless steel or in resin and can be connected to all Precia Molen load receptors.
|
|
|
Sartorius carries a wide range of control units, indicators and terminals for applications in production processes in the biopharmaceutical, chemical and food industries. This equipment extends from scales for simple weighing all the way to level cells for fill-by-weight level control and entire weighing networks for average weight control of prepackages.
|
|
Range of indicators powerful and versatile weighing:
- Approved 3000d or 3x3000d
- Panel mounting or box versions
- Comprehensive built-in functions covering a wide range of industrial applications: process control, filling, weighbridges, floor scales or on board weighing
|
|
Multi channels weight indicator type G4-PM
The G4-PM indicator is a new generation of multiple weighing indicators.
It is based around a main frame with:
One color LCD touch screen working under Windows CE
A 34 keypad pannel
One CPU unit with RS232; RS485 serial communication in Modbus RTU, an one Ethernet communication interface in Modbus TCP for easy connections to PLC & supervision.
The CPU card is also equipped with a USB connector for Back Up and restore or for a printer / key board connection.
The G4-PM can also handle up to 8 weighing channels through the WF-IN1 and WF-IN2 weighing cards with an internal 24 bits A/D converter and can reach a speed reading of 300 readings / sec or up to 1200 reading / sec with the weighing card HSWF-IN1 or 2.
Each weighing channel is equipped with 4 digital Inputs and 2 digital Outputs.
All set up can be done either on the touch screen or via the 34 push buttons keys pannel.
All set up can be saved and restore on the internal memory via the touch screen working under Widows CE.
Field buses: Profibus DP or Device Net can be installed on the CPU card as an option.
|
|
For all activities, our indicator range give you many possibilities.
Laid on table, with column kit or wall mounting kit, our indicators are easy to use and very reliable.
The whole range is available either in stainless steel or in resin and can be connected to all Precia Molen load receptors.
I 100 indicator
Indicators range I 200
Indicators range I 200 Ex
Indicators range I 300
I 400: Programmable weighing indicator
High performance weighing system with industrial field buses interface
|
|
The indicator of weighing TAD3 is primarily directed towards applications of weighing "Process".
Out of standard, Two exit RS485 MODBUS, Two entry TOR and two exits completely skeletal relays.
In option "Hardware", external modules DIO3 with 8 Entries TOR & 8 Exits relay; external modules ANA3 with analogical exit/16 bits.
In option "Software", a software of proportioning and formulation of 30 receipts and 24 sequences; a software of flow per weight loss for ponderal batchers...
|
|
The transmitters 1045 and indicating 1050 are particularly adapted to the most current applications of weighing with an excellent quality ratio/Prix.
Out of standard: Galvanically isolated analogical exit, port serial RS485 MODBUS RTU, left RS232/RS422 codes ASCII, Fonctions Tares Car, GROSS/NET, Fonction Memo peak, detection of stability of the weighing.
In option, Exit drunk of ground PROFIBUS DP or DEVICE NET.
Assembly rail DIN for 1045 and table for 1050 with food 24 Vcc.
|
|
Weight Range
Designed to accept a maximum weight of 30kg, the machine allows an operator to manually remove a pre-set weight of product and auto tares once the correct amount is achieved.
A rapid response digital loadcell allows high speed operation. A wide range of statistical product information can be downloaded to work in conjunction with printers or a management system.
Construction
A tubular stainless steel construction allows the weigher to be easily cleaned. It is IP65 protected and no tools are required to remove the quick release weigh plate.
Control Screen
The easy programmable electronics utilise a bright and well-defined backlit display. It allows an operator to quickly see when the correct amount has been achieved.
Integral Wheels
To move the mobile portion weigher simply tilts it back onto its wheels, when in position lower onto its sturdy adjustable feet.
Adjustable feet give stability on uneven factory floors.
Features :
- 100 product code memory
- Live weight graphically displayed
- Histogram statistical display
- Visual/audible weight confirmation
- Total batch weight
- Accept only mode
- Positive and negative scale facility
- Easy clean -Quick releases weigh plate
- IP65 protection minimum
- Stainless steel construction
- Removable weigh platform
- Digital loadcell
- Wheels for easy mobility
|
|
FEATURES
The A200E is a weight amplifier indicator based on a microcontroller. All the operations of configuration and weight calibration are done by front keyboard. The instrument is equipped with a main display to show weight and an auxiliary display to show the operator guide messages. The base version foresees three digital inputs, three digital outputs and two serial line outputs, a primary bi-directional line and an auxiliary one with transmission only.
The primary is available in RS232 or in RS485 mode to operate in multidrop network. ADOS has implemented as standard both the logic protocol MODBUS and PROFIBUS-DP by the gateway IPBUS1 (option). Options allow to expand the number of digital outputs from three to eleven ( S and D versions) and with options V or A it is possible to have an analog optoisolated output configured for 0-10 V or 4-20 mA. The A200E is equipped with a real time clock that allows to include date and time on printing reports. According to several applications, ADOS supply software versions for multicomponents batching and /or complex weighing process systems.
APPLICATIONS
Static weighing system
Multicomponents batchings
Testing machines
|
|
Multifunction weighing indicator series JOLLY.
Six different operating modes selectable by the customer :
1. Weight indicator with two alarm thresholds normally activated
2. Loading: batching of 1 product with two speeds
3. Loading: batching of 2 products in succession
4. Unloading: batching of 1 product with two speeds
5. Unloading: batching of 2 products in succession
6. Weight indicator with one alarm threshold normally deactivated
|
|
AEP transducers offers a complete series of digital indicators used to perform measurements and controls which varies from simple and low cost types to models with high performances.
The versatility united to the reliability of its products, has determined a presence always more consolidated in the use of its instruments in several sectors, industrial (oil-pressure, pneumatic, automation, test benches, material testing machines, electronic weighing, automatic dosing) and metrological (laboratories for research, test, calibration and certification).
The indicators dedicated to the automation have a basic version with 2.000 division and reach up to 300.000 divisions with possibility of internal set point, input programming (tension, current and mV/V) functions like zero, peak, unload, filter, data logger, etc...
Precision classes vary from 0.05% up to 0.005%.
Laboratory indicators consist of desk-top instruments, class 0.0025% and of batteries fed instruments used like SIT certified first line samples for the calibration of forces, weights, pressures, torques and lengths.
|
|
|
Weighing and batching electronics CE; CE-M and ATEX approved. Digital / Analogic Trasmitters. PC/PLC connection by the main communication protocols on the market. Weighing systems with more scales. Digital load limiting devices. Weighing in hazardous area.
|
|
Automatic freight weight verification with forklift on-board check weighing systems.
For material handling operations, on-board hydraulic load indicator is a simple way to keep an eye on safety and machine stress. Its easy to read display alerts operators to overloads and unsafe practices, helping you to avoid vehicle tipping over which is the most frequent type of forklift accident, according to OSHA.
The hydraulic load indicator also helps operators to verify and select the correct size loads and do not handle loads that are heavier than the weight capacity of the forklift. The bottom line results are a safe operation and better productivity. What's that worth to you? |
|
Engineered for easy use, the all-new Ohaus Indicators feature smart software and hardware enclosed in a modern industrial design. You can link our Indicators to any Ohaus bench scale - or any other scale system - with up to four load cells. Combined with Ohaus Champ bases, Ohaus has a wide variety of capacities and platform sizes to meet your operational needs.
|
|
2 Versions :
- IDX Solo : Stand alone Terminal for multi-products batching, sorting or truck scale applications
- IDX Basic : Multi channel weighing controler for field buses integration
Main caracteristics :
- 10 000 divisions according R76 OIML - CE certificate available
- Multi interval and multirange / high sensitivity - 1mV / division for ± 10 V load cell excitation
- Up to 4 Measurment channels with summation possibilities
- Drive up to 12 x 350 W load cell ( for example 4 channels of 3 load cells)
- Real time operating system inside
- 32 bits microcontroller - Motorola 332
Basic version specifications :
- 19 inches 2 U standard cabinet
- LCD display - 2 lines of 24 caracters
- 5 keys
- 1 x RS232 or RS485 communication - ports
- Field Bus optional board : Ethernet / Modbus+ / Profibus / Device Net...
- 8 i/o optional board
Solo version specifications :
- 19 inches 2 U - standard cabinet with separate terminal for operator
- LCD graphic display - alphanumeric key-pad
- Standard PC optional Keyboard
- Standard PCMCIA 2 Mo reader
- 2 x RS232 or RS 485 communication - ports
- Field Bus optional board : Ethernet / Modbus+ / Profibus / Device Net...
- Remote i/o options
- Standard software :
* Filling and Bagging solutions
* Multiproducts batching systems
* Truck scale terminals
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
