|
|
|
|
|
|
The XC checkweigher range are very precise, compact and economical checkweighing solutions suitable for virtually all weighing tasks in simple applications. The XC models deliver cost-effective solutions without compromising quality, precision, and performance for industrial checkweighing environments. They are ready to use almost immediately after unpacking through simple line integration and self explanatory and intuitive operation.
The XC checkweigher range is suitable for dynamically weighing products up to 6000g with an accuracy from ± 0.5g and a maximum throughput of 200 ppm.
They are principally used as "policeman" checkweighers to ensure compliance with local weights and measures regulations, checking for completeness of bundle packages and integrity checking of mechanical components. A further primary XC checkweigher function is to replace manual or semi-automated processes in compliance with customer demands to increase product quality and consistency. The 5.7" multilingual colour touchscreen interface is mounted in the control cabinet and displays current and historical production data.
The new XC range consisting of four outstanding checkweighing solutions, now offers models with improved accuracy, increased throughput, higher weighing ranges and a greater degree of water ingress protection to fulfil a wider range of application requirements
|
|
The BluePrint Automation full case checkweigher, Model XN1, is the perfect solution for the verification of your final, full product cases.
The BluePrint Automation system includes a load cell which can sense case weight variations due to over or underfilled cases.
The full case enters the checkweigher, and is lifted from the infeed conveyor to minimize erroneous errors to the load cell. When an over/under case is detected, the checkweigher simply rejects the case 90 degrees onto a reject conveyor. As the reject is integrsated into the same floor space as the load platform, you will not find a smaller case weigher with reject. Perfect for tight layouts!
|
|
New checkweigher generation HC Avantgarde (HC A) from OCS:
The new, freely-configurable user surface with simple, intuitive operation is impressive in its highest functionality. The optimal operability of the stainless steel operating terminal, which can be turned and tilted, is emphasized by a 12.1-inch colour touch screen. The open stainless steel construction in "Pyramid Design" provides the optimal foundation for the Weigh Cell with best-possible cleaning and highest precision. Simply avant-garde!
|
|
HSC350
Like every product of family HSC350, also the model HSC350M guarantees:
Performance without compromises
HSC350 is conformed with the OIML R51 Class III in the various versions until 270 piece for minute, as checkweigher in standard X(1) and as price labeler in standard Y(a).
Flexibility of preparation and use.
An extensive range of construction and capacity guarantees the right realization for an optimal answer to the requirements of the customer.
Ability to interconnect and comunicate with fillinf control and prepacking automation systems.
Internal lot counters and totalizers, available for printing, with legal for trade statistics management.
Constructive and maintenance simplicity
Modular tecnique construction with exclusive use of stainless materials.
Simple and immediate accessibility to the several parts for an easy maintenance.
Use of high performance servomotors, in order to assure a regular operation and lacking of vibrations in every condition.
|
|
The model DCI-40 has been conceived to address the market's need for a unit that allows flexibility of application, easy installation and worry-free startup.
The unit is totally modular by design. It incorporates simple systems for both fine tuning the working height level and quickly changing and/or replacing the conveyor belts. It incorporates a graphic display, easy-access control panel and simple menus from which the operator can quickly set the weight parameters.
|
|
Overview
Bosch electronic checkweighers in the extensive Bosch checkweigher module program are equipped with Industrial PC control system with 21 CFR Part 11 option and are ideal for universal applications.
|
|
|
|
|
|
The GARVENS XS3 CC H CombiChecker is a HACCP compliant in-line checkweighing and metal detection combination system. These two world-leading product inspection technologies combined with the very hygienic design make this checkweighing combination the food industry Nr. 1 brand protection choice.
The XS3 CC H checkweigher is suitable for dynamically weighing products up to 6000g with an accuracy from ± 0.1 g and a maximum throughput of 400 ppm.
Whilst the checkweigher measures product weights fast and precisely, rejecting out of tolerance products, the metal detector reliably detects and rejects products contaminated by metal. Common contaminants which are detected range from nuts and bolts down to small metal filings, staples, needles or pieces of wire. The rejection of badproducts is ensured by two rejecting devices so that metal-contaminated and off-weight products can be separately rejected.
Product and water build-up/contamination is minimized by avoiding level surfaces on the conveyor and weighcell supports, as well as the exclusive use of round tubes on the horizontal section of the frame. The patented, minimal contact, conveyor support clamps and open frame construction facilitate easy cleaning. Seam welding improves hygiene and reduces the risk of bacteria build-up.
Features and Benefits:
One Single User Interface for both Systems
The single 15" touch screen interface and comprehensive display of current weight and production data makes product change fast and simple. It’s intuitive, clear and easy to understand symbol menu system significantly reduces possible operator errors and increases productivity.
|
|
|
Combination of checkweigher and metal detector, compact design, central operation, logbook recording, optional conveyors in stainless steel available
|
|
|
|
|
|
If the production demands it, the section with metal-detector is available and it can be added in a standard checkweigher: the connection with the standard checkweigher is very simple: it's enough to insert the connector and the metal-detector section is operating.
Compact
With the integration of a metal-detector - mono-frequency or multi-frequency - the standard checkweigher HSC350 reassumes in the minimal space the necessary functions for a standard end-line.
Large range
The metal-detector is available in two versions: mono-frequency Series M and series S of small dimensions. It can be supplied also lacking of standard checkweigher like independent unit equipped of ejector and accessories.
Agro-industrial and more...
The contaminated product can be expelled with a shunter dedicated and accumulated "under key" in observance to the enforced norms on the pre-packing. The line arranged with mteal-detector comes used particularly in the alimentary field, but it can be easy integrated in every other production line.
Performance without compromises
HSC350 is conformed with the OIML R51 Class III in the various versions until 270 piece for minute, as checkweigher in standard X(1) and as price labeler in standard Y(a).
|
|
The checkweigher with Metal Detector TG32 TM enables a double control of weight and metal particles, for sets of pre-packed products continuously.
The checkweigher with MD TG32 TM is completely made in stainless steel. Its circular tube frame, without points of retention, makes easier its cleaning. Cantilever design enables a rapid change without any tools.
As the whole set TG3, the checkweigher with MD is completely designed and manufactured with standard materials of the market.
|
|
|
|
|
|
Now you can have both accurate weight control and the assurance that your product is free of metal contaminates all in a single source. This system features the superior performance and accuracy of a Thermo Scientific checkweigher with the high sensitivity of a metal detector with a minimal space requirement.
Product Detail
The metal detector/checkweigher combo provides both checkweighing and metal detection with a minimum space requirement. This system features the superior performance and accuracy of a Ramsey checkweigher with the high sensitivity of a Thermo Scientific metal detector. This unique arrangement eliminates the expense of a separate conveyor for the metal detector.
Output signals from the metal detector and checkweigher operate independent rejects. One rejects metal contaminated products, while the other rejects off weight products. This feature keeps metal contaminated products separate from potentially reusable off weight products.
The checkweighers have the design capability of being basic checkweighers or sophisticated comprehensive statistical systems. Availability of three or five weight zones, 100 product set-ups, auto zero and a host of features such as scope free calibration make the checkweighers user-friendly.
The Thermo Scientific metal detectors, reflecting the proud history of the Goring Kerr brand, bring you the highest levels of sensitivity and stability with the lowest levels of false rejects. Metal detectors available in a combo system include the small footprint IP69K rated DSP-IP+ and the latest technology APEX models.
|
|
| ... products without technical information |
| |
|
|
|
|
Different Signalling and Monitoring Equipment, Cameras, Traffic Lights, Optical Beacons, Signal Beacons, Horns, Grounding Systems
Flashing Beacon and Continuous Beacon:
Explosion protection to CENELEC, IEC
For use in Zone 1, Zone 2, Zone 21 and Zone 22
Saltwater-proof aluminium enclosure with polycarbonate hood
Flashing frequency 1 Hz
Integrated Ex e service compartment
Available in clear, signal yellow, red, blue, green and orange
Flashing energy 5 Joules
Continuous beacon in LED technology
Signal Beacon:
Explosion protection to CENELEC, IEC
For use in Zone 1, Zone 2, Zone 21 and Zone 22
Different Versions (rotating mirror beacon, rotating beacon, beacon with double flash (14 J), flashing beacon (15 J))
Saltwater-proof aluminium enclosure with glass hood
Integrated Ex e service compartment
Glass hood available in clear, signal yellow, red, blue and orange
Halogen lamp 20 W, 35 W
Grounding Systems:
Monitored electrostatic grounding of road tankers and tank wagons during the loading and unloading of flammable liquids
Safe vertification of the connected object-distinction between road tanker and other objects like loading platform
For use in Zone 1 and Zone 2
Robust design
Easy installation and operation
Two potential free contacts for signalisation to the control system and control of alarm devices
CCTV Camera:
Explosion protection to CENELEC, IEC
Can be used in Zone 1 and Zone 2
Camera with lens, power supply, ready to run for installation in factory
Cameras can be provided by customer
Available with swivel-tilt head, protective cover
Optional thermostatically controlled internal heating
|
|
|
|
|
|
- Conforms to the detection requirements of EU Reg. N°1862/2006
- Conforms to the provisions of EU Reg. N°857/2005 for Airport Security
- Automatic Detection of Weapons hidden in the shoes and simultaneous discrimination of the metal components of the shoes
- Increase in Passenger Flow Rate
- Reduction up to 10 times the number of shoes that must be examined manually
The dramatic events of 11th September 2001 caused the Airport Security Authorities to strengthen checks on passengers and their personal effects.
Notwithstanding the extremely high discrimination capability of last-generation CEIA walk-through Metal Detectors, a certain percentage of shoes containing significant metal masses still cause alarms during transit, and so have to be examined by security staff with another inspection system – usually the X-ray scanner – to ensure that there are no meal weapons hidden in them. This obviously causes inconvenience to the passengers in transit.
In the light of this new operational scenario, CEIA has developed the SAMD Shoe Analyzer to check shoes worn by passengers without having to remove them, employing low-frequency electromagnetic fields which are non-ionizing and completely harmless.
The SAMD Shoe Analyzer is an extension of the Walk Through Metal Detector Gate, which complies with the most recent, stringent security requirements, reduces by up to 10 times or more the number of shoes that must be examined manually because of metal alarm.
|
|
|
|
|
|
- Complete Security Detection
- Highly Visible Double Display provides Single or Multiple Location of Weapons in Transit
- Very High Speed of Detection
- High Immunity to External Interferences
- Direct Selection of the International Security Standards
- High Reliability
- Local or Remote Programming with Networking Capabilities
The HI-PE Multi Zone is a high performance walk-through Metal Detector which exceeds all International Security Standards.
A “height on person” display actually indicates, by means of illuminated LED’s, the position of the weapon on the person. Three operating modes are available: Floating (standard): the location zones are not fixed, as in the case of Metal Detectors with multiple receiver-transmitter coils, but are variable and continuous so as to achieve optimum resolution; 8-Zones and 4-Zones: the alarm threshold can be adjusted individually for each zone. The panels are washable and they are equipped with shock absorbent edges to protect them against damages.
HI-PE Multi Zone can be supplied, on request, with two emergency batteries that automatically come into operation in the event of a mains failure. A photocell transit counter is available as an option. This will allow for statistical data to be accumulated on the persons passing through the detector.
The detector’s control unit is incorporated into the structure. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords.
|
|
Smoke detector (smoke sensing using optical light scatter principle) to prevent transfer of smoke via the ventilation ducting in air conditioning systems. Suitable for control and release of fire and smoke dampers with General Building Approval equipped with electric or electro-pneumatic release mechanisms and working on the principle of power off to close.
Essential features
- Granted General Building Approval Z-78.6-125 by the German Institute for Structural Engineering, Berlin
- Can be used for air velocities of 1 m/s to 20 m/s
- Independent of air flow direction
- With integral mains adapter (supply voltage 230 V, 50 / 60 Hz)
- With potential-free signal and alarm relays
- With integrated signal lamps
- With contamination level indicator and "tracking" of sensitivity threshold (long service life)
- Can be used regardless of product or manufacturer
- Annual maintenance
|
|
General Information
Intelligent analogue addressable heat detector for use with JSB FX3302SS systems.
Heat detectors are best suited to environments where dust or smoke would regularly be present making the use of a smoke detector impractical.
approved to EN54 part 5
Ideal for smoky or dusty environments
Dual LED'S for maximum viewability with minimum travel distance
Relay base available for local remote signalling
Specification
Brand: JSB
Dimensions (mm): Dia 103 x D33
Weight (KG): 0.1
ANA Number: 5021621236321
Cable Entry: Via separate base
IP Rating: IP20
Detector Type: Heat (fixed only)
|
|
General Information
Intelligent analogue addressable optical smoke detector for use with JSB FX3302SS systems
approved to EN54 part 7.
Optical detectors are most responsive to large visible smoke particles and are best suited to slow burning or smouldering fires
Ideal for detecting smouldering fires
Easy to dismantle for on site cleaning
Dual LED'S for maximum viewability with minimum travel distance
Relay base available for local remote signalling
Specification
Brand: JSB
Dimensions (mm): Dia 103 x D33
Weight (KG): 0.1
ANA Number: 5021621236307
Cable Entry: Via separate base
IP Rating: IP20
Detector Type: Photo Electric
|
|
|
The QUESTemp® II personal heat stress indicator monitors an individual’s body temperature for indications of the onset of heat stress. It warns the user when their personal body temperature has risen above the "safe" level and that action should be taken to allow the body to cool.
|
|
or a door
drive control system. A range of similar
equipment for potentially explosive
environments is also available.
Smoke and heat detectors
Dictator provides complete hold-open systems for fire protection doors that are normally kept open but that have to be closed reliably in case of a fire.
One component of the hold-open system are the tested and approved DICTATOR smoke and heat detectors. They provide reliable detection of smokeor temperature rise.
They are powered by DICTATOR power packs.
Also according to the ATEX 100 directive for the use in hazardous areas.
Further DICTATOR products for hold-open systems:
Electromagnets
Door operators for fire protection doors, also in ex-proof design
Furthermor DICTATOR furnishes a smoke alarm for private dwellings.
|
|
ALG-V, Photoelectric Smoke Sensor
STANDARD FEATURES
Built-in optical fire test feature
Uses the noise immune Digital Communication Protocol (DCP), which utilizes interrupts for fast response to fires
Automatic compensation for sensor contamination
Simple and reliable device addressing method
Flat Response Photoelectric Chamber
Low Profile - Only 1.97" high, including base
|
|
|
|
|
|
Spark Detector FM 1/8
All three sensor types have high-sensitive electronics which detect even the smallest of glowing particles. The detector FM 1/8 features reliable function even in very dense material flow or when the optical element is covered by a dust layer. It can be used at material temperatures up to 60 °C which corresponds to a temperature range of extraction systems for woodworking machines, like for example saws, planes, sanding machines etc.
Spark Detector FM 3/8
The detector FM 3/8 is used for operating temperatures up to 360 °C as they can appear for drying processes for example. Spark radiation is led through fibre optic cables to the detctor itself.
Daylight Spark Detector DLD 1/8
For a reliable detection of glowing or hot particles it has to be assured that no ambient light is present at the inspection place. Where an absolute dark surrounding cannot be guaranteed sensors which aren't sensitive to daylight or other ambient light are used. These sensors only operate in the spectrum of infrared light so they can be installed even at open transfer points or on conveyor belts.
|
|
50 SD sensor of photoelectric smoke based on the Tyndall effect. The sensor is already complete of hoof for the logons. Led of memory 100 BUZZER but and, alarm escape to state of signalling alarm and anomaly. TEST alarm with magnet. In compliance with the Norms EN54, Min Certification. Int. Rome.
SD 50/12: as SD50 but with complete hoof of relè for operation with centers them to 12 V, it can be used in coupling to one centers them antitheft.
TECHNICAL CHARACTERISTICS
Feeding: from 9 to 24 Vcc.
Absorption: 43 µA in quiet and 38 but in alarm.
Accessories: A46 ring spacer for hoof detector.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
