|
|
|
|
|
|
The XC checkweigher range are very precise, compact and economical checkweighing solutions suitable for virtually all weighing tasks in simple applications. The XC models deliver cost-effective solutions without compromising quality, precision, and performance for industrial checkweighing environments. They are ready to use almost immediately after unpacking through simple line integration and self explanatory and intuitive operation.
The XC checkweigher range is suitable for dynamically weighing products up to 6000g with an accuracy from ± 0.5g and a maximum throughput of 200 ppm.
They are principally used as "policeman" checkweighers to ensure compliance with local weights and measures regulations, checking for completeness of bundle packages and integrity checking of mechanical components. A further primary XC checkweigher function is to replace manual or semi-automated processes in compliance with customer demands to increase product quality and consistency. The 5.7" multilingual colour touchscreen interface is mounted in the control cabinet and displays current and historical production data.
The new XC range consisting of four outstanding checkweighing solutions, now offers models with improved accuracy, increased throughput, higher weighing ranges and a greater degree of water ingress protection to fulfil a wider range of application requirements
|
|
The BluePrint Automation full case checkweigher, Model XN1, is the perfect solution for the verification of your final, full product cases.
The BluePrint Automation system includes a load cell which can sense case weight variations due to over or underfilled cases.
The full case enters the checkweigher, and is lifted from the infeed conveyor to minimize erroneous errors to the load cell. When an over/under case is detected, the checkweigher simply rejects the case 90 degrees onto a reject conveyor. As the reject is integrsated into the same floor space as the load platform, you will not find a smaller case weigher with reject. Perfect for tight layouts!
|
|
New checkweigher generation HC Avantgarde (HC A) from OCS:
The new, freely-configurable user surface with simple, intuitive operation is impressive in its highest functionality. The optimal operability of the stainless steel operating terminal, which can be turned and tilted, is emphasized by a 12.1-inch colour touch screen. The open stainless steel construction in "Pyramid Design" provides the optimal foundation for the Weigh Cell with best-possible cleaning and highest precision. Simply avant-garde!
|
|
HSC350
Like every product of family HSC350, also the model HSC350M guarantees:
Performance without compromises
HSC350 is conformed with the OIML R51 Class III in the various versions until 270 piece for minute, as checkweigher in standard X(1) and as price labeler in standard Y(a).
Flexibility of preparation and use.
An extensive range of construction and capacity guarantees the right realization for an optimal answer to the requirements of the customer.
Ability to interconnect and comunicate with fillinf control and prepacking automation systems.
Internal lot counters and totalizers, available for printing, with legal for trade statistics management.
Constructive and maintenance simplicity
Modular tecnique construction with exclusive use of stainless materials.
Simple and immediate accessibility to the several parts for an easy maintenance.
Use of high performance servomotors, in order to assure a regular operation and lacking of vibrations in every condition.
|
|
The model DCI-40 has been conceived to address the market's need for a unit that allows flexibility of application, easy installation and worry-free startup.
The unit is totally modular by design. It incorporates simple systems for both fine tuning the working height level and quickly changing and/or replacing the conveyor belts. It incorporates a graphic display, easy-access control panel and simple menus from which the operator can quickly set the weight parameters.
|
|
Overview
Bosch electronic checkweighers in the extensive Bosch checkweigher module program are equipped with Industrial PC control system with 21 CFR Part 11 option and are ideal for universal applications.
|
|
| ... products without technical information |
| |
Insulation monitor – type AAL-111Q96
The AAL-111Q96 is used for supervision of the insulation resistance between an insulated low-voltage distribution network (IT network) and earth cable/safety cable.
Features include:
- Monitoring of insulation resistance
- High or low ohms measurement
- Alarm on low insulation resistance
- Interchangeable scales
- AC or DC auxiliary voltage
The instrument is applicable in conjunction with single-phase networks and 3-phase networks with/without neutral for voltages up to 440V AC. The AAL-111Q96 is used for marine installations and other types of insulated low-voltage networks. An AC or DC auxiliary voltage is required for the instrument.
|
|
|
|
|
|
The ISOM range has confirmed SOCOMEC's position as leader in the field of insulation monitoring.
From the basic Permanent Insulation Monitor (CPI) to complete, upgradeable systems incorporating insulation measurement, fault localisation and monitoring functions, Socomec offers a whole range of solutions suitable for all electrical installations, even the most perturbed.
We also cover related services, such as audit, training, assistance with commissioning etc.
Application:
All LV/HV industrial or commercial installations.
Original features:
The ISOM ALD590 monitoring unit combines the following products:
- Permanent insulation monitor
- Search signal injector
- Insulation faults central locator
Advantages:
- AMP+ coded pulse measurement principle, ensuring immunity from interference present on the network, caused by electronic equipment (power converts, switching power supply, EMC filters)
- Increased readability with a backlit LCD display which is very easy for the user to read
- RS485 communication providing connection to monitoring systems (centralised building management, programmable controllers, dedicated software)
- Easy to fit (DIN format casing, plug-in terminal blocks)
|
|
Increased operating safety, personal protection and reliability of electrical installations are very important factors for everyone in charge of an electrical installation. In addition, there are the requirements for time and cost saving maintenance and repair for both simple control circuits and complex power supplies in industrial plants and in buildings.
|
|
| ... products without technical information |
| |
|
|
|
|
Different Signalling and Monitoring Equipment, Cameras, Traffic Lights, Optical Beacons, Signal Beacons, Horns, Grounding Systems
Flashing Beacon and Continuous Beacon:
Explosion protection to CENELEC, IEC
For use in Zone 1, Zone 2, Zone 21 and Zone 22
Saltwater-proof aluminium enclosure with polycarbonate hood
Flashing frequency 1 Hz
Integrated Ex e service compartment
Available in clear, signal yellow, red, blue, green and orange
Flashing energy 5 Joules
Continuous beacon in LED technology
Signal Beacon:
Explosion protection to CENELEC, IEC
For use in Zone 1, Zone 2, Zone 21 and Zone 22
Different Versions (rotating mirror beacon, rotating beacon, beacon with double flash (14 J), flashing beacon (15 J))
Saltwater-proof aluminium enclosure with glass hood
Integrated Ex e service compartment
Glass hood available in clear, signal yellow, red, blue and orange
Halogen lamp 20 W, 35 W
Grounding Systems:
Monitored electrostatic grounding of road tankers and tank wagons during the loading and unloading of flammable liquids
Safe vertification of the connected object-distinction between road tanker and other objects like loading platform
For use in Zone 1 and Zone 2
Robust design
Easy installation and operation
Two potential free contacts for signalisation to the control system and control of alarm devices
CCTV Camera:
Explosion protection to CENELEC, IEC
Can be used in Zone 1 and Zone 2
Camera with lens, power supply, ready to run for installation in factory
Cameras can be provided by customer
Available with swivel-tilt head, protective cover
Optional thermostatically controlled internal heating
|
|
In addition to components for measurement and automation, Endress+Hauser offers competent automation solutions for the process industries. These are scalable and range from simple measurement applications through intelligent fieldbus networks to autonomous process automation units.
Our automation solutions include specific process application know-how, innovative hardware and software platforms as well as expert knowledge of field communication systems such as HART, PROFIBUS and Foundation Fieldbus, including their respective configuration tools.
|
|
|
The 977CM - Current Monitoring Pulsed DC Controller, brings together powerful long-range ionisation; closed-loop feedback; self-monitoring and remote reporting. A complete package, unique to Meech. Self-monitoring and adjustment of performance allows optimum control of static for much longer periods than previously possible. Local display and output signals alert operators to the need to clean the equipment.
|
|
|
Infrared vision systems are used worldwide in a variety of industries to monitor continuous processes. Infrared can easily detect thermal information on product quality and/or production efficiency that is difficult or impossible to capture using conventional means such as thermocouples or visible light cameras. The ThermoVision A40-M is an affordable and accurate temperature measurement system. It is the ideal choice for industrial and automation applications requiring accurate non-contact temperature measurement.
|
|
|
|
