|
|
|
Weight Indicator TAD 3 is intended for converting signals from strain gauge based load cells and force transducers into suitable indication or for PC or PLC based systems. As options, flow measurement and recipe controlled batching facilities are available. The high accuracy and very fast transmission rates make TAD 3 perfectly suited to advanced process control. TAD 3 is panel mounted.
|
|
|
|
|
|
HGX-1000 Weighing Indicator
With its privileged aluminium frame and included 3 digital inputs / 2 relay outputs feature,ability to communicate with PC and PLC systems HGX-1000 is a high precision digital indicator,which can be utilized in packing,dosing,tank weighing,silo weighing, etc.
Technical specifications
• Easy to read with 20 mm 5 digit 7 segment display
• High accuracy ,high speed
• 3 internal relay outputs
• 3 internal digital inputs
• Automatic or manual zeroing
• Counter option
• 20 Recipes / 6 processes
• Full, Empty and I/O indication LEDs
• Calibration via keypad
• RS232 serial output
• Power down data protection
• Adjustable digital signal filtering
• Full scale zeroing
FSM-2 Weighing Indicator
With its privileged aluminium frame,FSM-2 is commonly used in various weighing applications such as bench scales,silo and tank weighing weighing platforms.
HGX-2000 Weighing Indicator
HGX-2000 Digital weight indicator/control terminal is designed to perform complete automated solition for various weighing application. 2x20LCD character & 6-digit LED Display facilitate utilization of the product. Due to its modular infrastructure, it compensa tes requirements for PLC, PC and Operation Panel applications.
FSM-2 Exproof Weighing Indicator
Ex proof certified packaging box provided for the protection of product in chemical & petroleum industred , encompassing explosion risk.Technical specifications are similar to FSM/2.
FSM-2 S Weighing Indicator
With its privileged stainless steel box to be protected fromdust and water, FSM-2 is commonly used in various weighingappliances such as platform scales,silo and tank weighing etc.
|
|
Range of indicators powerful and versatile weighing:
- Approved 3000d or 3x3000d
- Panel mounting or box versions
- Comprehensive built-in functions covering a wide range of industrial applications: process control, filling, weighbridges, floor scales or on board weighing
|
|
|
Sartorius carries a wide range of control units, indicators and terminals for applications in production processes in the biopharmaceutical, chemical and food industries. This equipment extends from scales for simple weighing all the way to level cells for fill-by-weight level control and entire weighing networks for average weight control of prepackages.
|
|
|
|
|
|
Multi channels weight indicator type G4-PM
The G4-PM indicator is a new generation of multiple weighing indicators.
It is based around a main frame with:
One color LCD touch screen working under Windows CE
A 34 keypad pannel
One CPU unit with RS232; RS485 serial communication in Modbus RTU, an one Ethernet communication interface in Modbus TCP for easy connections to PLC & supervision.
The CPU card is also equipped with a USB connector for Back Up and restore or for a printer / key board connection.
The G4-PM can also handle up to 8 weighing channels through the WF-IN1 and WF-IN2 weighing cards with an internal 24 bits A/D converter and can reach a speed reading of 300 readings / sec or up to 1200 reading / sec with the weighing card HSWF-IN1 or 2.
Each weighing channel is equipped with 4 digital Inputs and 2 digital Outputs.
All set up can be done either on the touch screen or via the 34 push buttons keys pannel.
All set up can be saved and restore on the internal memory via the touch screen working under Widows CE.
Field buses: Profibus DP or Device Net can be installed on the CPU card as an option.
|
|
Setra's SuperViewtm weight indicator includes the SuperII's feature set and familiar, intuitive menu structure. Designed to interface to strain gauge load cell bases, SuperView will drive up to twelve 350ohm load cells and has checkweighing and counting functions built in, with no programming required to use them. 2MB of internal memory provides space for storing APWs, tares, etc, as well as an internal transaction log.
The SuperView features a new and unique touch-capacitance-sensing keypad, which has no moving parts therefore cannot wear out mechanically and is protected by a polycarbonate bezel to prevent physical damage. Additionally, the NEMA 4X washdown stainless steel enclosure makes the SuperView a great, low cost solution for wet and/or industrial environments.
|
|
|
The transmitters 1045 and indicating 1050 are particularly adapted to the most current applications of weighing with an excellent quality ratio/Prix. Out of standard: Galvanically isolated analogical exit, port serial RS485 MODBUS RTU, left RS232/RS422 codes ASCII, Fonctions Tares Car, GROSS/NET, Fonction Memo peak, detection of stability of the weighing. In option, Exit drunk of ground PROFIBUS DP or DEVICE NET. Assembly rail DIN for 1045 and table for 1050 with food 24 Vcc.
|
|
DYNAMOMETER AND LOAD INDICATOR WITH DIGITAL DISPLAY
The new DYNAFOR LLX range of load indicating devices are highly accurate instruments for measuring tensile forces, suitable for many applications: transport and construction industries; testing and safety organisations; monitoring lifting equipment and load-checking goods in and out. The DYNAFOR principle is the movement of a material within its elastic limit, using bonded strain gauges to give an electrical signal under strain, relative to the load applied, which is instantly displayed on the LCD
|
|
|
Weight Indicator TAD 3 is intended for converting signals from strain gauge based load cells and force transducers into suitable indication or for PC or PLC based systems. As options, flow measurement and recipe controlled batching facilities are available. The high accuracy and very fast transmission rates make TAD 3 perfectly suited to advanced process control. TAD 3 is panel mounted.
|
|
|
|
|
|
FEATURES
The A200E is a weight amplifier indicator based on a microcontroller. All the operations of configuration and weight calibration are done by front keyboard. The instrument is equipped with a main display to show weight and an auxiliary display to show the operator guide messages. The base version foresees three digital inputs, three digital outputs and two serial line outputs, a primary bi-directional line and an auxiliary one with transmission only.
The primary is available in RS232 or in RS485 mode to operate in multidrop network. ADOS has implemented as standard both the logic protocol MODBUS and PROFIBUS-DP by the gateway IPBUS1 (option). Options allow to expand the number of digital outputs from three to eleven ( S and D versions) and with options V or A it is possible to have an analog optoisolated output configured for 0-10 V or 4-20 mA. The A200E is equipped with a real time clock that allows to include date and time on printing reports. According to several applications, ADOS supply software versions for multicomponents batching and /or complex weighing process systems.
APPLICATIONS
Static weighing system
Multicomponents batchings
Testing machines
|
|
Multifunction weighing indicator series JOLLY.
Six different operating modes selectable by the customer :
1. Weight indicator with two alarm thresholds normally activated
2. Loading: batching of 1 product with two speeds
3. Loading: batching of 2 products in succession
4. Unloading: batching of 1 product with two speeds
5. Unloading: batching of 2 products in succession
6. Weight indicator with one alarm threshold normally deactivated
|
|
For all activities, our indicator range give you many possibilities.
Laid on table, with column kit or wall mounting kit, our indicators are easy to use and very reliable.
The whole range is available either in stainless steel or in resin and can be connected to all Precia Molen load receptors.
|
|
|
|
|
|
Just one instrument with so much capacity for work
One way to gauge the value of a weighing instrument is to measure its ability to grow and adapt to new processes. The Model E1065 indicator/controller measures up to this challenge by its ability to grow with your needs and switch easily from job to job.
Control and communication
Easy to use in general weighing applications, the Model E1065 combines the capabilities of process control interface and data management.
Uncomplicated, the E1065 provides process control and data management to most standard and custom-configured weighing platforms using bench and floor scales.
With the advantage of the built-in network interfaces (Ethernet 10/100, PROFIBUS� and DeviceNet�), the indicator/controller is ideally suited for sharing data in tank weighing and truck scale applications.
In addition to offering these interfaces, the E1065 connects to printers, remote displays, computers and SensorComm�, the Avery Weigh-Tronix microprocessor-based digital junction box. This connectivity provides unparalleled flexibility to truck scales and batching Weigh Bar� systems.
An additional feature is the E1065�s bright multi-colored LED display with 0.8" digits, which allows operators to view weights with a quick glance.
|
|
Series S302
Displays for the weighing technology
Character heights 57, 100, 160 and 250 mm
Brilliantly red shining LED display
Light-reflecting displays in LRD®-technology
Displays with 4 or 5 digits
Dimension symbol (g, kg, t) fixed or electrically controllable
LED display with status indicator (NET/-0-)
Unit versions with infofield
Serial interface
Compatible with various types of weighing systems
Protection type IP54 and IP65 (option)
|
|
|
Weighing and batching electronics CE; CE-M and ATEX approved. Digital / Analogic Trasmitters. PC/PLC connection by the main communication protocols on the market. Weighing systems with more scales. Digital load limiting devices. Weighing in hazardous area.
|
|
For all activities, our indicator range give you many possibilities.
Laid on table, with column kit or wall mounting kit, our indicators are easy to use and very reliable.
The whole range is available either in stainless steel or in resin and can be connected to all Precia Molen load receptors.
I 100 indicator
Indicators range I 200
Indicators range I 200 Ex
Indicators range I 300
I 400: Programmable weighing indicator
High performance weighing system with industrial field buses interface
|
|
Typical applications may be: - Hopper weighing and batching systems - Road and rail weighing platforms - Conveyour scales, weigh feeders and blending sysMAIN
FEATURES :
- Power supply up to 6 load cells
- Optoisolated RS232 and RS485 serial ports
- Optoisolated 4 - 20 mA analog output
- Failure alarm hardware output
- High/low alarm hardware outputs
- Tare set/reset inputs
- Optoisolation of all digital input/output
- Stand-stil signal and peak value measurement
- Periodic selfcorrection of thermal drifts
- Optional local Key-board/display
tems - Silo level measurement and alarms
|
|
TRANSMITTERS
AST 3P / AST 3IS
Analogue output ±10 VDC, 0-20 or 4-20 mA. Digital output RS-485, MODBUS and via GATE 3 fieldbus communication.
WST 3
Analogue output ± 10 VDC, 0–20 or 4–20 mA. Serial communications: RS-485, MODBUS RTU protocol. Fieldbus interface: Profibus DP.
|
|
Profile:
Founded in 1967, Setra Systems, Inc. is a leading designer and manufacturer of pressure, acceleration, and weight sensing devices. Setra has devoted its engineering and research efforts to the development of transducers and systems based on the highly accurate variable capacitive transduction principle. Setra Systems was acquired in December 2001 by Gems Sensors of Plainville, Connecticut. Gems Sensors designs, manufactures and markets liquid level, flow and pressure sensors and controls and is a division of the Danaher Industrial Controls Group since 2004.
Products:
Process Automation & Sensing Controls: Sensors: Accelerometers, Digital Displays, Weigh Systems, Digital Manometers, Transducers
Digital Systems,
|
|
Simple Batrix Weighing of balance and platform
3000 levels Except legal metrology
Our range of indicators offers to you a vast choice for all the activities of weighing.
Conceived to be used in any situation they can be posed on a table, fixed at the wall or assembled on column and are for the majority available is out of resin or out of stainless and naturally they can be connected to all our range of receivers of load.
|
|
MASTER Series 410 SRS/SRC
maximum capacity 300 kg
Solid and reliable scales, for rough use year after year
Strain gauge platform SRC (380x500) stainless steel IP 67
Strain gauge platform SRS (400x500) steel platform IP 65
• Rugged Scale with stainless steel platform
• Choice of two terminals
• Practical and user-friendly
• LC display with backlight
• Battery operation
• RS232 interface
• Units kg and lb
• 2 years warranty
Terminal SRD, ABS or stainless steel IP 67
• Large LC display with backlight
• Battery operation
• Units kg and lb
• Check weighing program
Terminal SRM, ABS or stainless steel IP 67
• LC display with backlight
• Battery operation
• Counting, units kg and lb
• Direct: - ID and date settings
- tare entry
- reference weight entry for counting
|
|
Engineered for easy use, the all-new Ohaus Indicators feature smart software and hardware enclosed in a modern industrial design. You can link our Indicators to any Ohaus bench scale - or any other scale system - with up to four load cells. Combined with Ohaus Champ bases, Ohaus has a wide variety of capacities and platform sizes to meet your operational needs.
|
|
Engineered for easy use, the all-new Ohaus Indicators feature smart software and hardware enclosed in a modern industrial design. You can link our Indicators to any Ohaus bench scale - or any other scale system - with up to four load cells. Combined with Ohaus Champ bases, Ohaus has a wide variety of capacities and platform sizes to meet your operational needs.
|
|
| ... products without technical information |
| |
|
|
