|
|
Order Code Z-SG
Input: analog sensor (strain gauge load cell); digital (weighting)
Output: current, 0..20 / 4..20 mA; voltage, 0..5 / 0..10 V
Precision: 0.01%
Output via:
- analog signal (0/4..20mA, 0/2..10V, 0/1..5V)
- RS485 / RS232 Modbus RTU
Converter for load cells, mounting guide Din 46277, isolated to 1500 V (input-output-power supply). The transducer acquire signals from load cells (6-wire) and transmits the value with analogue standard (mA / V) and serial (ModBUS Rtu) output. It accepts up to N. 4 load cells (350 ohms) and also has a contact that can be configured as alarm or weighing stable (weighing in motion).
Extremely fast (sampling frequency set by 12.53 Hz at 151.71 Hz), it measures with sensibility from 1 to 128mV / V, and also has remote reset tare via serial or digital input.
Ideal to be used for weight complex measures, result of the action of multiple cells in parallel or with moving loads.
|
|
The LCT-01 is the world's most popular portable Load Cell Tester.
It is a stand-alone portable hand-held device that was especially designed to help technical people immediately analyze the condition of strain-gage based load-cells.
The LCT fits all common types of load-cells available in the market today: four wires, 6 wires (with sense) and all rated gain outputs.
It provides the user with the essential data needed about the conditions of the tested load-cell, such as physical distortion (possibly caused by overload, shock load or metal fatigue), and electrical conditions (bridge resistance, shielding and resistance to ground).
The LCT allows the user to test the load-cell whether it is installed or removed. The unit is fully computerized and battery operated. A 16 x 2 alphanumeric LCD display guides the operator through all test stages and clearly displays the results.
|
|
Output: 0/4-20 mA (±20 mA)
Accuracy class: 0,1 %
Input Range: 0,25-3,0 mV/V
Loadcell excitation: 10 VDC
Loadcell current: Max 200 mA
Nonlinearity: Max 0.02 %
Power Supply: 24 VDC
Case: Shielded metal cabinet
Mounting: DIN-rail (TS35)
|
|
Output: 0/4-20 mA (±20 mA)
Accuracy class: 0,1 %
Input Range: 0,25-3,0 mV/V
Loadcell excitation: 10 VDC
Loadcell current: Max 200 mA
Nonlinearity: Max 0.02 %
Power Supply: 24 VDC
Case: Shielded metal cabinet
Mounting: DIN-rail (TS35)
|
|
Output: RS232, RS485
Accuracy class: 0,01 %
Insignal range: 0-±2.5 mV/V
(0-±1.25, 0-±5.0 mV/V)
Loadcell excitation: 10 VDC
Lastcellsström: Max 200 mA
Nonlinearity: Max 15 ppm
Internal counts: 0 - 65535
Power supply: 24 VDC
Cabinet: Shielded metal cabinet
Mounting: DIN-rail (TS35)
|
|
|
We suggests for all the load cells a particular kind of mounting accessories in order to obtain a correct application of the cell and guarantees top performances and precision according to the mechanical, electrical and pneumatical connections present on the structure which has to be weighed.
|
|
Output: RS232, RS485
Accuracy class: 0,01 %
Insignal range: 0-±2.5 mV/V
(0-±1.25, 0-±5.0 mV/V)
Loadcell excitation: 10 VDC
Lastcellsström: Max 200 mA
Nonlinearity: Max 15 ppm
Internal counts: 0 - 65535
Power supply: 24 VDC
Cabinet: Shielded metal cabinet
Mounting: DIN-rail (TS35)
|
|
| ... products without technical information |
| |
|
|
