|
|
Digital load cells on the basis of the strain gage technology provide new impetus for the areas of dynamic weighing, sorting, filling, and dosing. In addition to all relevant functions for standard weighing processes, the intelligent load cells also provide control functions for sorting, filling, and dosing processes. Using a RS 232 or RS 485 4-wire interface, all relevant data can be accepted as a filtered, scaled, and digitized output signal directly into the control system used. And that at a fast measuring rate of up to 600 measurements per second.
|
|
|
|
|
|
-Robust technology and design
-High tolerance of up to 1.000 % overload
-Plug-and-play installation
-High accuracy, High resolution
-Hermetically sealed to IP68
-Interfaces: RS485, Profibus DP, DeviceNet, 4-20 mA, 0-10 V
-Digital filters
-ATEX certified
-3 years warranty
-Patented worldwide
The shockproof digital load cell is based on a capacitive measurement principle where a non-contacting ceramic sensor is mounted inside the load cell body. As the load cell contains no moving parts and the sensor is not in contact with the load cell body, the load cell tolerates shocks, torsion, and very high overloads and sideloads. Therefore, the mechanical installation of the load cell can be done without expensive and complicated mounting kits and overload protection devices.
The electrical installation of the digital load cell is pure plug-and-play as the signal from the non-contacting sensor is directly converted, compensated and calibrated by a microprocessor to a digital load cell output in grams, kilograms, or Newton. Measurements and status codes are transmitted as RS485 data on a single wire coaxial cable (RG-58) which may be up to 100 meters long.
The technology and mechanical design of the Eilersen load cells is covered worldwide by a number of patents.
|
|
High Capacity Load Cell
HT series have more advantages in comparison to column and S type load cells in industral weighing applications like low profile structure and off center loading effects for silo, tank weighing 2.000-50.000 ton capacity.
|
|
|
|
|
|
DK2 Compression Force Load Cell
The compression force load cells of the Dk2 series are characterized by their very compact design. They have been especially developed for applications where large forces must be measured accurately within confined spaces - diameter and height. The compression force load cell of the series DK2 consist of a cylindrical membrane, whose special form was optimized according to Finite Elements Analysis (FEA). Strain gauge elements on the membrane surface capture the acting forces. The voltage supply to the full bridge and the processing of the measuring signals is effected by way of a suitable amplifier, e.g. the HAEHNE DMA. The signals at the output terminals of the amplifier are proportional to the acting compression force. They can be digitally displayed or used as instantaneous values in a control loop. The radial cable entry facilitates simple mounting of the load cell to machine frames. In order to optimize the path of the force the use of a load button or a self aligning pad is recommended.
Features
Minimum space requirement due to compact design
Simple mounting
Made of stainless steel
|
|
Load cells work like calibrated springs.
A force is applied and there is a flexion: there is a Wheatstone bridge with strain gauges that measure this mechanical flexion thence giving a proportional electrical signal.
DS Europe can also manufacture load cells with built-in CE marked electronics with analog or digital outputs.
All load cells with non amplified output 2mV/V have a built in calibration circuitry that electrically simulates a known value of force shown in a certificate ( making It easy and quick to calibrate with the external electronics getting the signal ).
|
|
CM Load cell for compression applications
Range of measurement: from 100 to 50,000 Kg
Accuracy class: 0.1%
All stainless steel construction
Corrosion resistant
Internally generated calibration signal
Grade of protection: IP67 (DIN 40050)
TH Force transducer for tension/compression applications
Range of measurement: from 10 to 100 kN
Accuracy class: 0.1%
All stainless steel construction
Corrosion resistant
Internally generated calibration signal
Grade of protection: IP65 (DIN 40050)
|
|
|
|
|
|
HBM offers a comprehensive range of load cells and force transducers for weighing and force measurement applications, including customized solutions. All sensors are designed to work perfectly with our innovative measuring amplifier systems and our intuitive operating and
analysis software.
Load Cells
HBM weighing technology components can be found in almost all industries where goods are produced, processed or checked:
In the industrial production and scale equipment
In the manufacture of building materials
In the production of food and consumer goods
In the manufacture pharmaceutical products
In medical engineering.
Official PTB-approved certificates (the PTB is the national institute of natural and engineering sciences, and the highest technical authority for metrology and physical safety engineering in Germany) are available for a large number of load cells. Appropriate certificates are also available for worldwide use.
All standard load cells are available in accordance with European directive 94/9/EC (ATEX95).
Force Transducers
HBM force transducers are used today in every sector of industry and for R&D activities:
In the field of stress analysis
In manufacturing automation
In materials testing
In calibration.
|
|
The Load-Force-Weight Sensor family is a complement to Magtrol's range of load measuring pins. These sensors can be used in different applications where the load measuring pin cannot be mounted. Our various executions and precision classes provide you with great flexibility for your application.
Used with our load monitoring unit or signal conditioners, Magtrol Load-Force-Weight Sensors constitute an ideal load and weighing measurement system which continuously checks for defined loads and overloads.
|
|
ST Series Load Cell
This cost effective S-type loadcell is designed for tank,vessel and hooper weighing.Also it is used filling,packaging and batching applications.Altough this loadcell is utilisedin comression, it is possible to use in tension and also bi-directional forces as well.
ST-2W Series Load Cell
ST-2W high capacity compression type load cell is designed for truck scales,silo and tank weighing, applications.Manufactured for weighing 10-20 T capacity.
|
|
Column Type Load Cell
CT Series Loadcell, is designed for truck scales and silo weighing applications. The spacial alloy steal body is coated with a heavy-duty paint to hostile environment. The body is completely closed with welding and is is in IP68 CLASS. Manufacturing for weighing 10 tons and 30 tons.
|
|
|
We have a comprehensive range of general purpose and specialist load cells including low range precision sensors and high capacity load cells.
|
|
SCAIME offers a wide range of load cells allowing to provide the best solution for all the weighing applications.
- Capacities from 1kg to 200t
- OIML R60 approval up to 6000d
- All modes of demounting of load:
Single point
Compression
Bending, shear beam
Traction
- Different materials and degrees from protection allowing to optimize the cost ratio/performance
- Complete range Certified ATEX
|
|
|
You are working on an industrial application where you need "Force transducers"? A whole range of transducers can be integrated in your project easily. Your machine is operated by tension and/or compression force. Just have a look in the table hereunder? The Force transducer you are looking for is most certainly available. Do you need further information regarding the use of our load cells? Natural Frequency? Accuracy? Use in radio-active environments? If the solution isn’t present on our website, don’t hesitate to contact our team of Sales Engineers. If you have a question, you’ll get the answer! Don’t forget to look at our customised solutions, because flexibility is part of our philosophy. Just test us. We guarantee a quick and professional advise /quotation.
|
|
|
Sartorius offers bending beam, compression and shear beam load cells as well as tension load cells, among others, for a wide variety of applications.
|
|
|
Whether you need conventional solutions for regular tasks or you want to weigh something in a difficult location, Schenck Process, provides you everything you need from the standard unit to the weighing sensors that are capable of turning practically anything into a scale all from one source. Accuracies range from ± 0,05% to the highest precision legal-for-trade C5 and C4 Mi-7.5 (± 0.01%); we can provide the accuracy that meets your needs. For low weighing values from 5kg (11.02 Ibs) to heavy weigh values of 470 tons [metric] (518 tons [short]). Regardless of the environment where you intend to set up the weighing forms and installation conditions. Be it hazardous area applications, environmental conditions that require protection types up to IP 68 or hot applications with temperatures of up to 150°C (302°F).
|
|
This Low Profile Tension & Compression Load Cell has high accuracy. It has Nonlinearity of ±0.1%, Deflection of 0.003" nominal and Operating temperature of -60° F to +200° F. The standard LRF300 Low Profile Tension & Compression Load Cell can be modified or customized to meet your requirements and most capacities are in our inventory, making them available for 24 hour shipping. Similar to our entire Load Cell product line this model is manufactured in USA and uses metal foil strain gauge technology.
Product Highlights:
Light Weight
Low Deflection
2024 Aluminum Construction
In both Tension & Compression
Low capacity applications
Utilizes Metal Foil Strain Gauge Technology
|
|
CTS02 Compression - Tension - Sensor
The Compression Tension Sensors CTS02 was developed for the precise measurement of large forces, acting in axial direction.
For this purpose, the outer ring is flanged to the mounting surface and the force passes into the centre bore.
Features
Low profile
Insensitive to off-center forces
For dynamic and static force measurement in compression-tension mode
Design with nickel plated surface
|
|
We have a comprehensive range of general purpose and specialist force cells including low range precision sensors and high capacity force cells.
|
|
Shear Beam Load Cell
This single ended shear beam loadcell is designed for high capacity automatic filling machines It can be used in weighing platforms by the change of up side down.The body of LT-5C is contructed in hardened and nickel plated alloy steel .The cable joint and stainless steel covers sealed with Ip65 as well.
|
|
All Stainless Steel Construction
0.25% Interchangeable for Multiple Cell Applications
5-Point Calibration Certificate Included
FM Approved Intrinsically Safe
|
|
DS Europe produces tensiometer load cells series LCR for web tension control on rolls and calendars. Tensiometer load cell series LCR are the housing of roll and calendar ball bearing and measure the tension of the machined webs on textile, paper, rubber, plastics machines.
Measuring ranges: from 0 up to 1500Kg FS.
Outputs: 2mV/V, 5V, 10V, 4-20mA.
Application advantages:
- easy to install (low thickness and through hole),
- overload protection on X-Y-Z measuring axis,
- dust protection for ball bearing,
- measuring axis alignment ( =better sensitivity).
|
|
Tension and Compression Sensor Type K25
Wire strain gauges in four-conductor full-bridge circuit.
Control resistance for final adjustment of the measuring
range.
All measuring ranges that are specified in Newton can also
be supplied in kg ranges.
|
|
|
|
|
|
The S Beam Jr. Load Cell with Overload Protection (Tension/Compression) has become one of the signature products in the FUTEK Load Cell Series. This model is widely used in Medical Bag Weighing Applications as well as automated feed back control and inline processing applications.
The perfect mixture of size, accuracy and of course the assurance of an overload protection feature makes this one of our most sought after models. With a height that is less than 1 inch (25 mm) the S Beam Jr. is a great selection where tight environments or space is a challenge.
These miniature S Beam Load Cells can be modified or customized to meet your requirements and most models are available in our inventory making it available for 24 hour shipping. Similar to our entire Load Cell product line this model is manufactured in the US and uses metal foil strain gauge technology.
• Compact sized s-beam
• Available in both Aluminum or Stainless Steel
• External Matched output option available
• Built In Overload Protection
• Metric Threads Available
• In both Tension & Compression
• Operating Temperature of -60° F to 200° F
• Utilizes Metal Foil Strain Gauge Technology
• Weight: 0.3 oz (aluminum) / 1.1 oz (Steel)
|
|
Futek S Beam Load Cells (Tension/Compression) offer a compact design for a variety of applications. Available in standard and metric, the s beam load cell series provides accuracy, compact design features, overload protection (select models), and a wide capacity range to choose from.
Similar to our entire Load Cell product line the s beam load cells are manufactured in the US and uses metal foil strain gauge technology. Any of models can be easily modified or customized to meet your requirements and most models are available in our inventory making it available for 24 hour shipping.
• High Endurance
• Built in Overload Protection
• Single Point Construction
• Operating Temperature of -60° F - 200° F
• Wide Capacity Range
• Utilizes Metal Foil Strain Gauge Technology
|
|
|
The Tension and Compression Load Cell offers high accuracy and high stiffness. It has Nonlinearity of ±0.5% and Deflection of 0.001" nominal. The standard LCM300 Tension and Compression Load Cell can be modified or customized to meet your requirements and most models are in our inventory making them available for 24 hour shipping. Similar to our entire Load Cell product line this model is manufactured in USA and uses metal foil strain gauge technology.
|
|
|
RS Series loadcell, is designed for measuring the tension in winding drum applications. It senses the applied force to the bearing of loadcell which is mounted at the edge of the drum during the process of winding and unwinding. It is widely used in textile and printing industry. The special alloy steel body is coated with crome and increased its resistance to corrison. Manufactured for weighing 25, 50, 100kgs.
|
|
MB Series Tension Sensors
The MB Series of load cells uses an LVDT type sensor to convert tension into a proportional electrical signal.The LVDT system provides precise, accurate tension measurement while the mechanical design allows for extremely high overloads without damage to the unit
Features
- Extremely accurate LVDT type sensor
- Mountable at any angle
- Suitable for either symmetrical or asymmetrical web path angles
- Capable of taking extreme overloads without structural damage or loss of calibration
- Simplified mechanical structure
- No calibration or maintenance required
|
|
|
The Thru Hole Donut Load Cell Series offers 5 models built for Off-Center Loading, Press, or Inline compression applications. These models have a very robust construction available in 17-4 Stainless Steel, with an I.D. range of 1/8" to 1 1/4".
|
|
APPLICATIONS:
The bending load cell type 54 can be used in small loading capacity weighing systems.
Some applications are :
- Belt conveyor scale and weight feeders
- Small weighing platforms
- Weighing in hopper, tanks, etc.
MAIN FEATURES:
- Water-proof
- Universal use
- Stainless steel body with bellow microplasma soldered
- High precision (equivalent to OIML C3)
NOMINAL LOAD: kg 2-5-10-20-50-100-200-300-500
|
|
VE4 - BENDING BEAM LOAD CELL
APPLICATIONS
-Washdown/Corrosive Environments
- Process Control Weighing
- Belt and Bagging Scales
- Tank, Bin and Hopper Weighing
- Reactor, Mixer and Blender Weighing
FEATURES
- 5 Kg to 500 Kg Capacities
- Compact Size
- 0.03% Accuracy Class
- Stainless Steel Design
- Welded, Hermetic Sealing
- Environmentally Sealed-IP66/67
- Companion Weigh Modules
- Two Year Warranty
|
|
|
|
