|
|
The sensor is suited for torsion measurements and the measurement of reaction moments for orthopaedic measuring devices. It is applicable for measurements of friction forces.
The strain gauge full bridge measure the torsion movement appearing in the tube of the lattice structure. |
|
Provide precise measurements of manifold turbo pressure and other high output diesel and gasoline engine performance characteristics in operating pressure ranges up to 48 psi, 333 kPa, 3.3 bar and 3.3 Atm. Delphi Turbo Pressure sensors are designed to perform in harsh environments such as extreme temperatures and vibration, thermal and mechanical shock, and chemical contamination.
Delphi Turbo Pressure Sensors feature cutting edge sensing technology and a patented Delphi Application Specific Integrated Circuit design. They are built in-house and provide highly robust and reliable operation. Combined with Delphi's vast manufacturing experience, they offer quality and customer satisfaction. |
|
Model 103B01
Acoustic ICP® pressure sensor, 3.3 psi, 1500 mV/psi, integral 2-wire cable, accel. comp.
Measurement Range: (± 5 V output) 3.33 psi (181 dB)
Sensitivity: (±15%) 1500 mV/psi (217.5 mV/kPa)
Low Frequency Response: (-5%) 5 Hz
Resonant Frequency: >=13 kHz
Electrical Connector: Integral Cable
|
|
ASTEEL SENSOR's sensitive edges are complete safety electric systems which integrate a sensor and an automatic control module.
ASTEEL SENSOR's sensitive edges are particularly fit in with applications such as : elevating platforms, without driver transport systems, machines' automatic doors, presses
The ASTEEL SENSOR choice :
- The system is independent from atmospheric pressure, temperature and vibrations.
- A 4 wires technology ensures the redundancy of the safety chain
- Possibility to connect several sensitive edges on the same automatic control module.
- Sensitive edges are available either with standard dimensions or on-measure according to your specifications |
|
Bumpers ASTEEL SENSOR are complete electric systems of safety, which integrate a sensor, sensitive to a force of actuation, as well as an enclosure of self-checking.
Sensitive bumpers ASTEEL SENSOR are particularly adapted for the applications such as: wire-guided carts, forklift trucks, installations with automatic displacement, gantry cranes.
Choice ASTEEL SENSOR:
- System independent of the atmospheric pressure, the temperature and the vibrations.
- Technique with 4 yarns to ensure the redundancy of the chain of safety
- Possibility of connecting several devices sensitive to the same enclosure of self-checking.
- Models available with standard dimensions or to measure. |
|
ASTEEL SENSOR's sensitive mats are complete safety electric systems which integrate a sensor and an automatic control module.
ASTEEL SENSOR's mats are particularly fit in with applications such as : robots, machines, assembly lines, vertical storage warehouses.
The ASTEEL SENSOR choice :
- The system is independent from atmospheric pressure, temperature and vibrations.
- A 4 wires technology ensures the redundancy of the safety chain
- Possibility to connect several sensitive mats on the same automatic control module.
- Sensitive mats are available either with standard dimensions or on-measure according to your specifications |
|
| ... products without technical information |
| |
A range from 50 mB to 4 000 B or 5 m water to 250 m water
Our large range of stainless steel pressure sensors is designed to measure fluid pressure. These sensors can be used to measure liquid levels for applications such as:
- filling tanks
- check of water table levels
Our sensors can be equipped with configurable recording systems. Their very low power consumption design enables several years autonomy. |
|
Sensortechnics is a leading manufacturer and distributor of a wide range of sensors and fluid control devices. The product portfolio includes basic pressure sensors, rugged transmitters, submersible level sensors and customised pressure sensing systems from 1 mbar up to 1000 bar as well as liquid level switches, oxygen, flow and force sensors. Additionally, Sensortechnics offers ultrasonic air bubble, air-in-line, liquid level and fluid monitoring sensors and detectors. Fluid control devices include miniature solenoid valves and diaphragm pumps, electronic pressure controllers and custom specific fluidic control systems.
Sensortechnics has more than two decades of experience in providing highly customised sensing products and in the development of complex integrated fluid control systems for OEM customers worldwide. |
|
Example:
-JUMO dTRANS p33 Pressure transmitter and level probe for use in hazardous areas (40.4753)
The type 404753 pressure transmitter measures the pressure in both corrosive and noncorrosive gases, vapors, liquids and dusts. The transmitter operates on the piezoresistive measuring principle. The output signal is a DC current that is proportional to the input pressure.
The type 404753 pressure transmitter fulfills the following requirements for equipment group II
in Zone 1 and 2 areas with an explosion hazard arising from gas (Gas).
The pressure connection (process connection) may, however, also be mounted on to zone 0.
in Zone 21 and 22 areas with an explosion hazard arising from dust (Dust)
The EC type-examination certificate is designated: SNCH 03 ATEX 3545.
The pressure transmitter can also be used as a level probe (extra code /406).
|
|
A range from 0.05 to 250 m water
These sensors are used to measure liquid levels for applications such as:
- filling tanks
- check of water table levels
Our sensors can be equipped with configurable recording systems. Their very low power consumption design enables several years autonomy.
Their internal memory allowe to record 500 000 values. |
|
| ... products without technical information |
| |
200136 Seal-Leak Detection (SLD) Transducer
The 200136 SLD transducer incorporates highly reliable proximity probe technology observing a moving diaphragm to detect static pressure changes on the non-pressurized end of single or double seals or between tandem or dual seals. Changes in pressure indicate failing seals. The transducer is specifically designed for use with our 200135 TIM as part of a Trendmaster® Pro system for continuous monitoring of process pumps handling toxic or flammable materials in the chemical and hydrocarbon processing industries |
|
Delta P is an electro-pneumatic leak tester dedicated to perform pressure decay leak tests: it makes it possible to bench tests small or medium sized as well as rigid or plastic products.
Delta P may be also managed by a PLC or by a PC supervisory system make it easy to using it on automatic production lines in every industrial sector.
* Leak test up to 6 bar
* Pressure resolution 0.01 mbar (1 Pa)
* 16 programmable test parameters tables: each table includes all the parameters defining a test cycle so it is easy to make predefined test setting for different products.
* Selectable pressure measurement units.
* Selectable languages for display messages
* Print out of customized test report (with external RS-232 printer)
* RS422 serial line MODBUS protocol for PC supervisory system
* Opto-isolated interface with PLC
* An aided procedure making it possible to calibrate the pressure sensor. |
|
The most common use of ultrasonic noise detection is to locate leaks in pressurised systems. When air escapes through an orifice, the flow becomes turbulent. This vortex of air has an ultrasonic signature. This ultrasonic noise is characteristically identified as a "rushing" sound with very few discernable single audio tones. The Ultrasonic detector is specifically tuned to listen for this vortex tone.
Detection of leaks within high-pressure systems can be relatively simple. However, low-pressure systems require an addition technique. Very small leaks in fuel system "bag tanks" and welded seams etc can be too small to be detected using the ultrasonic vortex signature however, the leak can be amplified by adding a low viscosity liquid to the seam or joint. Small bubbles are generated at the location of the leak, these micro bubbles burst provoking ultrasonic emissions that are easily detected by the GE Druck AEROSPACE TOOL KIT. |
|
Measuring range : from 0/+10 Pa to -10 000/+10 000 Pa
Configurable intermediary and central zero ranges
Air velocity and airflow functions
Interchangeable measuring sensor (SPI technology)
Simultaneous display of 1 to 4 parameters
External transmitter unputs (KIMO class 200 and 300) and thermocouple K
2 output 4-20 mA or 0-10 V (4 wires), RS 232, 2 RCR relays 6A/230 Vac
2 visual (dual color LED) and audible (buzzer) alarms
Software, keypad or remote control configuration
MODBUS network RS 485 system (optional)
ABS or ALU IP 65 housing, with or without backlit gaphic display
Mounting with the 1/4 turn system with wall-mount plate
CP301 : -100/+100 Pa
CP302 : -500/+500 Pa
CP303 : -1000/+1000 mbar
CP304 : -10 000/+10 000 mbar
• Barbed fittings Ø 5,2 mm
• Unit of measurement : Pa, mmH2O, mbar, inWG, mmHG
• Power supply : 24 Vac /Vdc, 115 Vac or 230 Vac
• Outputs : 2 x 4-20 mA or 2 x 0-10 V
• Functions : pressure, air velocity, airflow with Pitot tubes, Debimo and other coefficients, integration of measure, self-calibration, measuring correction factor, temperature compensation : manual or automatic (thermocouple K input). |
|
| ... products without technical information |
| |
Pressure transmitter with datalogger DL/63 :
- Pressure ranges from 0¡50 mbar and -1¡1000 bar available
- Accuracy pressure measurement ¡Ü 0.1%
- Measuring interval adjustable from 2 s to 24 h
- Non volatile data memory for 130'000 measurements |
|
|
|
