|
|
|
|
|
|
-Robust technology and design
-High tolerance of up to 1.000 % overload
-Plug-and-play installation
-High accuracy, High resolution
-Hermetically sealed to IP68
-Interfaces: RS485, Profibus DP, DeviceNet, 4-20 mA, 0-10 V
-Digital filters
-ATEX certified
-3 years warranty
-Patented worldwide
The shockproof digital load cell is based on a capacitive measurement principle where a non-contacting ceramic sensor is mounted inside the load cell body. As the load cell contains no moving parts and the sensor is not in contact with the load cell body, the load cell tolerates shocks, torsion, and very high overloads and sideloads. Therefore, the mechanical installation of the load cell can be done without expensive and complicated mounting kits and overload protection devices.
The electrical installation of the digital load cell is pure plug-and-play as the signal from the non-contacting sensor is directly converted, compensated and calibrated by a microprocessor to a digital load cell output in grams, kilograms, or Newton. Measurements and status codes are transmitted as RS485 data on a single wire coaxial cable (RG-58) which may be up to 100 meters long.
The technology and mechanical design of the Eilersen load cells is covered worldwide by a number of patents.
|
|
|
|
|
|
-Robust technology and design
-High tolerance of up to 1.000 % overload
-Plug-and-play installation
-High accuracy, High resolution
-Hermetically sealed to IP68
-Interfaces: RS485, Profibus DP, DeviceNet, 4-20 mA, 0-10 V
-Digital filters
-ATEX certified
-3 years warranty
-Patented worldwide
The shockproof digital load cell is based on a capacitive measurement principle where a non-contacting ceramic sensor is mounted inside the load cell body. As the load cell contains no moving parts and the sensor is not in contact with the load cell body, the load cell tolerates shocks, torsion, and very high overloads and sideloads. Therefore, the mechanical installation of the load cell can be done without expensive and complicated mounting kits and overload protection devices.
The electrical installation of the digital load cell is pure plug-and-play as the signal from the non-contacting sensor is directly converted, compensated and calibrated by a microprocessor to a digital load cell output in grams, kilograms, or Newton. Measurements and status codes are transmitted as RS485 data on a single wire coaxial cable (RG-58) which may be up to 100 meters long.
The technology and mechanical design of the Eilersen load cells is covered worldwide by a number of patents.
|
|
|
Sensors of industrial weighing in shearing, entirely welded stainless and seals IP68. Sensor 3510 is especially used for applications of weighing on hoppers, plates of weighing, and applications of measure of force. Exist of 300 kg to 5000 kg with homologation IOLM in 3000 divisions
|
|
If you have special requirements for your measurements, why not rely on transducers and sensors that optimally match your specific application? We develop and manufacture customized transducers for you that meet your specifications. Benefit from the market leader's experience and competence to get your custom-designed sensor.
Measure weight using customized transducers from HBM - also available as multi-component transducers!
Benefit from the proven high quality, delivery reliability and global availability you already know from our standard range of products.
- Flexible design and quantity - be it small or large quantities. With or without amplifier - it's your choice
- Quick development and manufacturing - Rapid engineering and rapid prototyping make it possible
- Reliable through our competent After Sales service, two-year warranty, DKD calibration and ISO9001 certification
...at an excellent price/performance ratio!
|
|
Responding to specific projects is a part of our strength.
Are you looking for a solution for which no available component is to be found on the market? We will help you solving your problem by means of one of the special load cells we already realized or by developing a custom made model. Our design team will assist you in your project, from its very beginning till its complete realisation. Designing and realizing new solutions are our specialties; it belongs to our company's culture. During the last years, we have developed more than 1500 models and applications, from single part till medium and great serial production. We can present you a documented proposal including quotation within short time.
Even a part of an existing machine can, under certain conditions, become a force transducer measuring tension or compression. Transducers that will respond to your need at particularly competitive prices.
|
|
|
Sensors of industrial weighing in inflection, entirely welded stainless and seals IP68. Sensor 355 is especially used for applications of weighing on hoppers, plates of weighing, machines of conditionings and applications of measure of force. Exist of 5 kg to 250 kg with homologation IOLM in 3000 divisions
|
|
|
Sensors off industrial weighing in shearing, entirely welded stainless and seals IP68. Sensor 3510 is especially used for applications off weighing one hoppers, punts off weighing, and applications off measure off force. Exist off 300 kg to 5000 kg with homologation IOLM in 3000 divisions
|
|
SCAIME offers a wide range of load cells allowing to provide the best solution for all the weighing applications.
- Capacities from 1kg to 200t
- OIML R60 approval up to 6000d
- All modes of demounting of load:
Single point
Compression
Bending, shear beam
Traction
- Different materials and degrees from protection allowing to optimize the cost ratio/performance
- Complete range Certified ATEX
|
|
An extensive range of products for the use in the process industry, covering all accuracy levels, various automation needs and communication demands.
The applications range from level control by weight, flow by weight, bulk weighing of silos, standard batching, weighing and batching of agitated vessels and batching control in parallel including recipe handling in larger systems.
- High accuracy
- Superior installation properties
- Withstands up to 100% side load
- For hard environmental conditions (IP67)
- Covers most applications
|
|
Extensometer 178 of Vishay Nobel was especially developed for the applications of level weighing and monitorings on existing or new silos of a few tons to several hundred tons.
Extensometer 178 is a gauge sensor of extensometry which transforms a mechanical deformation of the foot of the silo according to the weight into an electrical signal (mV/V) directly proportional to the load applied to the foot of the silo.
This sensor has many advantages:
Easily plantable on existing silos
No major modifications
Control nonintrusive level
Measuring accuracy from 1% to 4% of the Payload
Very good alternative to the traditional weighing of the silos
Directly exploitable signal of measurement by electronic standards for gauge sensors
Very Quality positive ratio/Price
|
|
The LCIC-WIM allows to connect most load cells and scales to a PC via the popular USB or RS232/485 ports.
The LCIC-WIM was designed to fit all real-time weighing and force measurement applications, like:Checkweigher, Weighing In Motion (trucks and rails),Batching and filling systems, Testing machines etc. this product helps our customers to easily design their controllers saving them engineering time and money.
|
|
|
Weighing amplifiers and transmitters are available, for example, for networking platforms in control and automation systems. A choice of versions is supplied for the diverse hazardous area zone classifications and approvals.
|
|
AST 3P / AST 3IS
Analogue output ±10 VDC, 0-20 or 4-20 mA. Digital output RS-485, MODBUS and via GATE 3 fieldbus communication.
WST 3
Analogue output ± 10 VDC, 0–20 or 4–20 mA. Serial communications: RS-485, MODBUS RTU protocol. Fieldbus interface: Profibus DP.
|
|
The unit AST 3IS is a DIN rail mounted, high performance isolation amplifier designed for applications with strain gauge transducers inside hazardous areas.
AST 3IS has at its heart a unique Nobel patented analogue to digital converter. The unit is equiped with analogue as well as digital outputs which can be conditioned to give the user accurate, stable and fast response measurement information.
|
|
Utilising many years of load cell and transducer design and manufacturing experience, Flintec is able to provide a custom strain gaging service on customer supplied components. From low volumes through to serial production, Flintec can provide a cost effective and reliable service to OEMs.
For customers requiring solutions to force measurement problems, Flintec is able to supply custom designed and manufactured load cells, transducers, application parts and electronics or even complete sensing solutions.
|
|
FLINTEC load cells are designed to meet the most stringent
accuracy requirements. Certifications have been obtained
from Weights & Measures Authorities, worldwide. Single Point load cells are available in the capacities 6kg to 2000kg and include Accuracy Classifications GP,
C1, C3, C3 MI 7.5, C4 and C4 MI 7.5 according to OIML R 60;
Beside the aluminium Single Point Load cell Flintec offers total stainless steel construction and complete
hermetic sealing, making them suitable for use in the toughest industrial environments.
ATEX versions available.
|
|
Weighing and Batching
An extensive range of products for the use in the process industry, covering all accuracy levels, various automation needs and communication demands.
The applications range from level control by weight, flow by weight, bulk weighing of silos, standard batching, weighing and batching of agitated vessels and batching control in parallel including recipe handling in larger systems.
|
|
T010E is a weight transmitter amplifier that uses a modern microcontroller. Four push buttons and one display that shows the guide messages, help the operator in the configuration and weight calibration.
T010E is an instrument with high modularity. The base configuration is equipped with a display to show the weight data and two relays thresholds can be programmed as required. The options foresees one serial line available in RS232 or in RS485 mode, a radio transmission for remote data weight transfer (with R010E serial repeater), an analog output 0-10 V or an analog output 4-20 mA.
In the overload control modality (option) the instrument can be associated to category 1 as a security device (UNI EN 954-1 12-98 norm). The smaller dimensions, the best ratio quality price, make the T010E the best solution for many applications.
|
|
Industrial bus: Profibus DP
Accuracy class: 0,01 %
Insignal range: -4 - +4 mV/V
Loadcell Excitation: 5 VDC
Lastcellsström: Max 100 mA
Conversion rate: 3.25 - 30 conversions/s
Counts: -25 000 - +25 000
Internal counts: -400 000 - +400 000
Power supply: 24 VDC
Cabinet: Shielded metal cabinet
Mounting: DIN-rail (TS35)
|
|
|
|
|
|
TRANSMITTERS
JA - FIELD RANGABLE ANALOG TRANSMITTER
APPLICATIONS
-Strain Gage Measurements
- Load Cells
- Force Transducers
- Torque Transducers
- Pressure Transducer
- Transducer Interface To PLC/DCS
- Process Control
- Weighing Systems
- Level Monitoring and Control
- Intrinsically Safe Applications
- Cost Effective OEM/VAR Solutions
FEATURES
- High Performance Measurements-Grade Power Supply And Precision Amplifier
- Range Of Selectable Output Formats For Voltage Or Current
- Input, Output, Excitation And Zero Offset Parameters Are Field Configurable
- Compatible With Single Or Multiple "Summed" Transducers
- Preload Offsets Adjustable Up To 100% of Span Range
- Linear Optical Isolation Of The Input, Output And Power Supply Eliminates
- Loop Potential, Provides Common Mode Rejection And Reduces Noise Pickup
- Remote Sensing Is Selectable And Maintains Constant Voltage At the Transducer(s)
- DIN Rail Or Panel Mount Using Industry Standard Plug-N-Play 11-Pin Socket
- No Interaction Between Zero And Span
- Designed For Use In "Electrically Noisy" Industrial Environments
- Functional Test/System Calibration Pushbutton
- Easy Setup And Calibration
- Multiple LED's Monitor Input And Output Signal Levels
- Powers Up To (4) 350 Ohm And Up To (8) 700 Ohm Transducers
- Compact Case Dimensions Of Only 2.75" High X 2.38" Wide X 1.75" Deep
- The JB Series is A "Summing Transmitter" Version Integrated With A Four Channel
- Summing Module In A NEMA 4/4X Enclosure
- NEMA 4/4X And Explosion-Proof Housings Are Available
- The JD Series Is A Low Cost "Fixed Range" Alternative To The "Rangeable" JA Series
- One Year Warranty
|
|
|
|
|
|
Transmitter - AST 3IS
AST 3IS
* Unique design to allow transducers in hazardous areas without the need of zener barriers
* Analogue output ± 10 VDC, 0-20 or 4-20 mA
* Seriel communications: RS-485, MODBUS RTU protocol
* Relay outputs
* Compact DIN rail mounting
* CE compliant - EMC and Low Voltage
The unit AST 3IS is a DIN rail mounted, high performance isolation amplifier designed for applications with strain gauge transducers inside hazardous areas.
AST 3IS has at its heart a unique Nobel patented analogue to digital converter. The unit is equiped with analogue as well as digital outputs which can be conditioned to give the user accurate, stable and fast response measurement information.
The transmitter is fitted with two relay outputs having a short response time for use in high precision level control applications.
The AST 3IS is compatible with other instruments in the Vishay Nobel programme and can communicate via the RS-485/MODBUS RTU protocol with a common process control host - PC/PLC. Fieldbus communication is possible via the GATE 3S module from Vishay Nobel.
* [EEx ia] IIC approved
* Excellent performance in spite of EX version
* Fully isolated
* Simple earting (compared with zener barriers)
* Direct connection of transducers in hazardous areas without the need af zener bariers
|
|
FLX
Bending Beam Load Cell
> 3000/6000d OIML
> 50/100/200 kg
FFX
Bending Beam Load Cell
> 3000/6000d OIML
> 300/600/1500/3500/5000 kg
|
|
CAN-DY (Field Bus load cell Transmitter)
> Digital transmitter for 1 to 4 load cells of 350 W
> IP 66 plastic box
> 2 operating modes :
- RS 485 output modbus protocole
- CAN network output - CAN OPEN protocole
> With CAN network configuration, CHAINDY option is available
> Possibility to connect on the same Bus 13 CANDY transmitters
(Modbus, Profibus, Device Net, Ethernet)
|
|
Flintec Electronics program offers a wide range of components for load cell and others strain gauge based sensors,
- Digital Junction Boxes
- Weighing Indicators
- A/D converters
- Analogue Amplifiers
- Remote display Terminals
|
|
Transmitter - WST 3
The unit WST 3 is a DIN rail mounted, high performance transmitter designed for applications with strain gauge transducers. It converts the output from connected load cells into a very stable signal suitable for PC or PLC based control systems.
WST 3 is typically used where a local display is essential either for displaying data or for front panel set-up. The set-up and calibration procedure is easily performed either from the front panel or by using the deltaCOM programme via a standard PC running under Windows 95/98/2000/NT4/ME/XP.
The transmitter is fitted with two relay outputs having a response time of less than 20 msec. for use in high precision level control applications.
The WST 3 is ready for fieldbus communication in Profibus DP. Fieldbus communication is also possible via the GATE 3S module from Vishay Nobel.
|
|
The RON series includes Crane Scales, Dynamometers and Tension Load Cells.
The RON 4000 is a loadcell with a built-in analog amplifier. This loadcell is specially designed to transmit load or force information to a controller/computer, as part of controlled tensioning and tension measurement.
For example, RON 4000 electronic Load Cells serve as tension
Load Cells for tension measurement and controlled tensioning of rubber belt conveyors or continuous weighing of steam piping in a power station to detect water condensation in pipes and drain them when the max. permitted level is reached.
The unique perpendicular hole structure of the loadcells neutralizes external moments and thus improves safety and accuracy.
The small and light loadcells ensure portability and low headroom loss for any application.
RON Crane Scales, Dynamometers and electronic Load cells
are used for weighing during lifting, overload prevention and tension, force and load measurement.
|
|
| ... products without technical information |
| |
|
|
