|
|
The Wire Booster assists the wire feeding between the pail pack and the wire-feeding unit of a robot welding system or a manual power source.The driving rollers of the Wire Booster are separated from the running motor through a magnetic clutch. The wire is fed by the magnetic clutch, as soon as the main drive of the robot employs force on the wire. Through this functional principle the Wire Booster does not necessarily have to be connected or synchronised with the main drive.Wire feeding problems can now be solved fast and without any unnecessary installation.
For detailed information please visit our homepage.
|
|
|
in order to obtain the best result when braze welding with weld material, sinergo has developed digital-control tools wich can automatically apply soft or silver solder. These devices allow you to shorten working time, assuring always a high, checkable and repeatable quality.
|
|
Panasonic KF-350 and KF-500
Cost-efficient. Clean. Consistent.
The Panasonic KF series power supplies provide simple, efficient and dependable operation. They are designed to maximize welding performance while minimizing spatter. A special idle power saving circuit also reduces power consumption, which ensures lower operating costs.
For most conventional applications the KF-350/500 has an exceptionally low total cycle cost compared to other welding packages.
Each package incorporates a power supply, wire feeder and remote control pendant.
Features & Benefits
- Includes idle "power saving circuit" - reducing power consumption as well as operating costs
- Runs in low noise level
- Trigger latching capability on long welds to reduce operator fatigue
- Excellent welding performance for Argon mixed gases and 100% CO2
|
|
|
Smooth wire feed is critical to many welding applications. ESAB meets the need with ready-to-weld feeder packages featuring the latest technology for easy functionality and dependable operation.
|
|
| ... products without technical information |
| |
|
|
|
|
Powerbox Greenhub 2000
Line GreenHub di Powerbox H2planet, that is all the one which you have always asked from an independent energetic system:
like the current of house but with all the advantages of energetic independence. Ideal like group of continuity, unit of emergency generation, unit of generation from field, but also like domestic generator for the isolated rooms with lowlands every day requirements.
Technical detailed lists
- till 2000W of peaking power
- the maximum power in continuous use: 1800W
- exited in alternating current BTicino 220V (sinusoidal pure)
- the maximum hydrogen consumption
- feeding 2-6bar
- hydrogen: degree 4,5 minimum (gas dry)
- hydrogen consumption to max power: 28 l/min.
Included in the system Powerbox GreenHub 2000:
- it arranges with car-humidification system stack (NOT PRODUCED REFUSE)
- handles in rubber for the transport
- possible recovery arranges of GreenAir aeration for maximum performances stack and warm air for cogenerativo use
- holes threaded posterior for the wall implantation
- attack ultrasure express to lowland pressure
- shop for approached express inner
- timer programmabile for programs ignition weeklies magazine/standy
- inverter integrated DC/AC and DC/DC
- escape 220-230VAC @ 50Hz
- escape 12/24VDC for recharges batteries
- escape 5V USB 2,0 for all the electronics
- emergency sensors standard: losses hydrogen, inner temperature, pressure for control level hydrogen, antiscassinamento
Optional:
- remote control iGreen GSM/GPRS smartphone/iPhone over IP
- slowly of substitution to by-wire (iGreen necessary) of hydrogen bottles
- programmed maintenance
|
|
|
|
|
|
Powercell Greenhub 5000
Line GreenHub di Powerbox H2planet, that is all the one which you have always asked from an independent energetic system:
like the current of house but with all the advantages of energetic independence. Ideal like group of continuity, unit of emergency generation, unit of generation from field, but also like domestic generator for the isolated rooms with lowlands every day requirements.
Technical detailed lists
- till 5000W of peaking power
- the maximum power in continuous use: 2700W
- exited in alternating current BTicino 220V (sinusoidal pure)
- the maximum hydrogen consumption
- feeding 2-6bar
- hydrogen: degree 4,5 minimum (gas dry)
- hydrogen consumption to max power: 70 l/min.
Included in the system Powerbox GreenHub 5000:
- it arranges with car-humidification system stack (NOT PRODUCED REFUSE)
- handles in rubber for the transport
- possible recovery arranges of GreenAir aeration for maximum performances stack and warm air for cogenerativo use
- holes threaded posterior for the wall implantation
- attack ultrasure express to lowland pressure
- shop for approached express inner
- timer programmabile for programs ignition weeklies magazine/standy
- inverter integrated DC/AC and DC/DC
- escape 220-230VAC @ 50Hz
- escape 12/24VDC for recharges batteries
- escape 5V USB 2,0 for all the electronics
- emergency sensors standard: losses hydrogen, inner temperature, pressure for control level hydrogen, antiscassinamento
Optional:
- remote control iGreen GSM/GPRS smartphone/iPhone over IP
- slowly of substitution to by-wire (iGreen necessary) of hydrogen bottles
- programmed maintenance
|
|
|
|
|
|
Powercell Greenhub 3000
Line GreenHub di Powerbox H2planet, that is all the one which you have always asked from an independent energetic system:
like the current of house but with all the advantages of energetic independence. Ideal like group of continuity, unit of emergency generation, unit of generation from field, but also like domestic generator for the isolated rooms with lowlands every day requirements.
Technical detailed lists
- till 3000W of peaking power
- the maximum power in continuous use: 2700W
- exited in alternating current BTicino 220V (sinusoidal pure)
- the maximum hydrogen consumption
- feeding 2-6bar
- hydrogen: degree 4,5 minimum (gas dry)
- hydrogen consumption to max power: 42 l/min.
Included in the system Powercell GreenHub 3000:
- it arranges with car-humidification system stack (NOT PRODUCED REFUSE)
- handles in rubber for the transport
- possible recovery arranges of GreenAir aeration for maximum performances stack and warm air for cogenerativo use
- holes threaded posterior for the wall implantation
- attack ultrasure express to lowland pressure
- shop for approached express inner
- timer programmabile for programs ignition weeklies magazine/standy
- inverter integrated DC/AC and DC/DC
- escape 220-230VAC @ 50Hz
- escape 12/24VDC for recharges batteries
- escape 5V USB 2,0 for all the electronics
- emergency sensors standard: losses hydrogen, inner temperature, pressure for control level hydrogen, antiscassinamento
Optional:
- remote control iGreen GSM/GPRS smartphone/iPhone over IP
- slowly of substitution to by-wire (iGreen necessary) of hydrogen bottles
- programmed maintenance
|
|
|
|
|
|
Powerbox Greenhub 1000
Line GreenHub di Powerbox H2planet, that is all the one which you have always asked from an independent energetic system:
like the current of house but with all the advantages of energetic independence. Ideal like group of continuity, unit of emergency generation, unit of generation from field, but also like domestic generator for the isolated rooms with lowlands every day requirements.
Technical detailed lists
- till 1000W of peaking power
- the maximum power in continuous use: 800W
- exited in alternating current BTicino 220V (sinusoidal pure)
- the maximum hydrogen consumption
- feeding 2-6bar
- hydrogen: degree 4,5 minimum (gas dry)
- hydrogen consumption to max power: 14 l/min.
Included in the system Powerbox GreenHub 1000:
- it arranges with car-humidification system stack (NOT PRODUCED REFUSE)
- handles in rubber for the transport
- possible recovery arranges of GreenAir aeration for maximum performances stack and warm air for cogenerativo use
- holes threaded posterior for the wall implantation
- attack ultrasure express to lowland pressure
- shop for approached express inner
- timer programmabile for programs ignition weeklies magazine/standy
- inverter integrated DC/AC and DC/DC
- escape 220-230VAC @ 50Hz
- escape 12/24VDC for recharges batteries
- escape 5V USB 2,0 for all the electronics
- emergency sensors standard: losses hydrogen, inner temperature, pressure for control level hydrogen, antiscassinamento
Optional:
- remote control iGreen GSM/GPRS smartphone/iPhone over IP
- slowly of substitution to by-wire (iGreen necessary) of hydrogen bottles
- programmed maintenance
|
|
|
|
|
|
Powercell Greenhub 4000
Line GreenHub di Powerbox H2planet, that is all the one which you have always asked from an independent energetic system:
like the current of house but with all the advantages of energetic independence. Ideal like group of continuity, unit of emergency generation, unit of generation from field, but also like domestic generator for the isolated rooms with lowlands every day requirements.
Technical detailed lists
- till 4000W of peaking power
- the maximum power in continuous use: 3800W
- exited in alternating current BTicino 220V (sinusoidal pure)
- the maximum hydrogen consumption
- feeding 2-6bar
- hydrogen: degree 4,5 minimum (gas dry)
- hydrogen consumption to max power: 56 l/min.
Included in the system Powerbox GreenHub 4000:
- it arranges with car-humidification system stack (NOT PRODUCED REFUSE)
- handles in rubber for the transport
- possible recovery arranges of GreenAir aeration for maximum performances stack and warm air for cogenerativo use
- holes threaded posterior for the wall implantation
- attack ultrasure express to lowland pressure
- shop for approached express inner
- timer programmabile for programs ignition weeklies magazine/standy
- inverter integrated DC/AC and DC/DC
- escape 220-230VAC @ 50Hz
- escape 12/24VDC for recharges batteries
- escape 5V USB 2,0 for all the electronics
- emergency sensors standard: losses hydrogen, inner temperature, pressure for control level hydrogen, antiscassinamento
Optional:
- remote control iGreen GSM/GPRS smartphone/iPhone over IP
- slowly of substitution to by-wire (iGreen necessary) of hydrogen bottles
- programmed maintenance
|
|
|
Powerbox 500 is a fuel-cell system for electric current production at zero emissions. A super-compact500W system (550W peak), ideal for fuel-cell small applications: modeling, robotics, automation, small electric vehicles or any other portable application.
|
|
|
Rugged. Reliable. GenCore® fuel cell systems. With unmatched availability and scalable DC power, GenCore fuel cells outperform batteries and generators without any of the associated drawbacks. It’s the best solution for your back-up power requirements. Because you don’t want to know when the power comes back on, you only want to know that it never went out.
|
|
... see all the products in the category
Fuel cells
|
PUR Weld Cable
PUR Control Cable
Regulated Voltage / Medium Frequency Cable
Regulated Voltage Cable
Proportional Valve Cable
PUR Hybrid Cable
Interbus Hybrid Cable
IBS Cable Rugged Line
Special PUR Cable
PUR Hybrid Cable (Cable for Welding Control)
PUR Multi Bus Cable
|
|
|
|
|
|
MAN-MADE MACHINES
LAPP MULLER is the partner of robots, gantries, machine tools manufacturer for the design and the production of power lines, power/control, servomotors and safety control systems.
Bending
Bending/Torsion combined
Oils
Paint, Solvents
- ROBOCABLESÒ F3
Miniaturized cable for drag chain
- ROBOCABLESÒ F1X
Miniaturized cable for very long and high speed drag chain
- ROBOCABLESÒ F1
Cables for robots in bending and torsion combined up to +/-360°/m
- ROBOCABLESÒ F1 GOLD
Cables for robots in bending and torsion combined up to +/-720°/m
- ROBOCABLESÒ UL
All our range of ROBOCABLESÒ with UL homologation
- ROBOCABLESÒ BUS
Cables answering to all existing bus protocols
- ROBOCABLESÒ CLEAN ROOM
Complete range of ROBOCABLESÒ for use in Clean Rooms, with DIN ISO 14644-1 certificate
- HYBRID UMBILICALS
Composite robotics cables interface with electric hydraulic pneumatic and optic
- HARNESS CABLES
- ROBOTS EQUIPMENTS AND SERVICES
These companies trust us :
STAUBLI, COMAU, KUKA, ABB, PEUGEOT CITROEN, NELSON, SAMSUNG, FIAT, DURR, MICHELIN, ROBOTEC….
|
|
MAN-MADE MACHINES
LAPP MULLER is the partner of robots, gantries, machine tools manufacturer for the design and the production of power lines, power/control, servomotors and safety control systems.
- ROBOCABLES F1
Cables for robots in bending and torsion combined up to +/-360°/m
- ROBOCABLES F1 GOLD
Cables for robots in bending and torsion combined up to +/-720°/m
- ROBOCABLES UL
All our range of ROBOCABLES with UL homologation
- ROBOCABLES BUS
Cables answering to all existing bus protocols
- ROBOCABLES CLEAN ROOM
Complete range of ROBOCABLESÒ for use in Clean Rooms, with DIN ISO 14644-1 certificate
- HYBRID UMBILICALS
Composite robotics cables interface with electric hydraulic pneumatic and optic
- HARNESS CABLES
- ROBOTS EQUIPMENTS AND SERVICES
These companies trust us :
STAUBLI, COMAU, KUKA, ABB, PEUGEOT CITROEN, NELSON, SAMSUNG, FIAT, DURR, MICHELIN, ROBOTEC….
|
|
Robotic cables 300 volt ~ 300/500 volt ~ 600volt ~ 0.6/1 kV
PVC Control and Power Cables
Low capacitance zero halogen PUR Electronics Cables
PVC/PUR Control Cables
PE/PUR power and servo single conductors 0,6/1 kV
TPE-E/PUR Electronics and Control Cables
TPE-E/PUR servo single conductors 0,6/1 kV
|
|
| ... products without technical information |
| |
SELF - LIFFTING STANDS
Unwinding stands for sites - carr. capacity 1500 to 5000 kg.dia. Ø600-2800mm
|
|
Pitbull Portable Automatic Beveler
Produce clean machined bevels without operator assistance. The SPB-3000, Pitbull Portable Automatic Beveler, will produce clean machined bevels without operator assistance. The self propelled Pitbull can bevel angles up to 60 degrees and mill all types of metal including stainless steel, aluminum, and composites because of its operational simplicity and very high machining properties. To receive solutions to all of your welding and cutting applications and for complete product brochures and video, please visit our website at www.bugo.com.
|
|
KBM® beveling machines are designed for one man operation. They are mounted on a spring loaded undercarriages incorporating alignment mechanisms which automatically compensate for uneven work surfaces. Gullco KBM® beveling machines self-propel during the beveling operation and continuously bevels plates of any length. The KBM-18 beveling machine can be secured to a bench for stationary operation.
All Gullco portable plate edge bevelers use a rotary shear cutting action to produce clean machined bevels with no thermal distortion. KBM beveling machines are available in four models; KBM-18 & KBM-18U Beveller, KBM-28 & KBM-28U Heavy Duty Beveller. The "U" model is for underside of plate bevelling applications.
FEATURES:
- Self propelled during beveling operation
- Spring loaded adjustable base
- Rotary shear cutting action to produce clean machined bevels.
- Bevels angles 22 1/2 through 55 degrees
- NO THERMAL DISTORTION
- KBM-18 3m per minute
- KBM-28 2m per minute
|
|
|
|
|
|
ABM 26 is the latest portable plate beveler featuring unique AUTO-FEED system.
The machine can travel along plate's edge in both directions and perform bevelling without any physical force of the operator.
Main features and benefits:
- quick fix AUTO FEED system
- advanced overload protection system
- heavy duty control system
- no physical force necessary
- effective and efficient plate beveling with machine-tool quality
- possibility to customize guide track
- user-friendly control panel
- low cost of beveled edge
- safety
Technical specifications:
Power supply: 230-240V / 50-60Hz
Motor power: 1,5 kW
Feed system: AUTO only
Feed speed: up to 500mm; 19 11/16 ” /per min. (for construction steel)
Beveling width: up to 35mm; 1 3/8 ”
Angles range: from 0° up to 75° ( 0°, 15°, 30°, 45° in standard set)
Guide track working length: 2000mm as standard; 78 ¾ ” – unlimited extensions possible by means of additional guide track (1200mm; 47 1/4" each)
Bevelled plate thickness: up to 60mm; 2 3/8 ” – when more than 35mm; 1 3/8 ” specify with order.
|
|
Hose size : 2" 4 SP and 6" industrial
. Swage force : 320 tons
. Opening : Die diameter + 55 mm
. Opening without dies : 260 mm
. Maximum crimp diameter 230 mm
. Motor : 5,5kW / 230-400V 3ph
|
|
|
|