|
|
The Wire Booster assists the wire feeding between the pail pack and the wire-feeding unit of a robot welding system or a manual power source.The driving rollers of the Wire Booster are separated from the running motor through a magnetic clutch. The wire is fed by the magnetic clutch, as soon as the main drive of the robot employs force on the wire. Through this functional principle the Wire Booster does not necessarily have to be connected or synchronised with the main drive.Wire feeding problems can now be solved fast and without any unnecessary installation.
For detailed information please visit our homepage.
|
|
|
in order to obtain the best result when braze welding with weld material, sinergo has developed digital-control tools wich can automatically apply soft or silver solder. These devices allow you to shorten working time, assuring always a high, checkable and repeatable quality.
|
|
|
Smooth wire feed is critical to many welding applications. ESAB meets the need with ready-to-weld feeder packages featuring the latest technology for easy functionality and dependable operation.
|
|
Panasonic KF-350 and KF-500
Cost-efficient. Clean. Consistent.
The Panasonic KF series power supplies provide simple, efficient and dependable operation. They are designed to maximize welding performance while minimizing spatter. A special idle power saving circuit also reduces power consumption, which ensures lower operating costs.
For most conventional applications the KF-350/500 has an exceptionally low total cycle cost compared to other welding packages.
Each package incorporates a power supply, wire feeder and remote control pendant.
Features & Benefits
- Includes idle "power saving circuit" - reducing power consumption as well as operating costs
- Runs in low noise level
- Trigger latching capability on long welds to reduce operator fatigue
- Excellent welding performance for Argon mixed gases and 100% CO2
|
|
| ... products without technical information |
| |
SELF - LIFFTING STANDS
Unwinding stands for sites - carr. capacity 1500 to 5000 kg.dia. Ø600-2800mm
|
|
Pitbull Portable Automatic Beveler
Produce clean machined bevels without operator assistance. The SPB-3000, Pitbull Portable Automatic Beveler, will produce clean machined bevels without operator assistance. The self propelled Pitbull can bevel angles up to 60 degrees and mill all types of metal including stainless steel, aluminum, and composites because of its operational simplicity and very high machining properties. To receive solutions to all of your welding and cutting applications and for complete product brochures and video, please visit our website at www.bugo.com.
|
|
KBM® beveling machines are designed for one man operation. They are mounted on a spring loaded undercarriages incorporating alignment mechanisms which automatically compensate for uneven work surfaces. Gullco KBM® beveling machines self-propel during the beveling operation and continuously bevels plates of any length. The KBM-18 beveling machine can be secured to a bench for stationary operation.
All Gullco portable plate edge bevelers use a rotary shear cutting action to produce clean machined bevels with no thermal distortion. KBM beveling machines are available in four models; KBM-18 & KBM-18U Beveller, KBM-28 & KBM-28U Heavy Duty Beveller. The "U" model is for underside of plate bevelling applications.
FEATURES:
- Self propelled during beveling operation
- Spring loaded adjustable base
- Rotary shear cutting action to produce clean machined bevels.
- Bevels angles 22 1/2 through 55 degrees
- NO THERMAL DISTORTION
- KBM-18 3m per minute
- KBM-28 2m per minute
|
|
|
|
|
|
ABM 26 is the latest portable plate beveler featuring unique AUTO-FEED system.
The machine can travel along plate's edge in both directions and perform bevelling without any physical force of the operator.
Main features and benefits:
- quick fix AUTO FEED system
- advanced overload protection system
- heavy duty control system
- no physical force necessary
- effective and efficient plate beveling with machine-tool quality
- possibility to customize guide track
- user-friendly control panel
- low cost of beveled edge
- safety
Technical specifications:
Power supply: 230-240V / 50-60Hz
Motor power: 1,5 kW
Feed system: AUTO only
Feed speed: up to 500mm; 19 11/16 ” /per min. (for construction steel)
Beveling width: up to 35mm; 1 3/8 ”
Angles range: from 0° up to 75° ( 0°, 15°, 30°, 45° in standard set)
Guide track working length: 2000mm as standard; 78 ¾ ” – unlimited extensions possible by means of additional guide track (1200mm; 47 1/4" each)
Bevelled plate thickness: up to 60mm; 2 3/8 ” – when more than 35mm; 1 3/8 ” specify with order.
|
|
Hose size : 2" 4 SP and 6" industrial
. Swage force : 320 tons
. Opening : Die diameter + 55 mm
. Opening without dies : 260 mm
. Maximum crimp diameter 230 mm
. Motor : 5,5kW / 230-400V 3ph
|
|
|
A very important factor for cutting edge quality is the accuracy and stability of the abrasive flow rate. The Accustream Regulator II is designed to ensure peak cutting performance. The regulators II's compact abrasive metering system delivers the precise amount of abrasive needed to the cutting head at maximum speed. The system is positioned close to the waterjet cutting head which decreases the distance the abrasive travels and guarantees a smooth cut, while curtailing the abrasive that is wasted on inefficient cutting.
|
|
|
|
|
|
Abrasive feeding system
SAEB ERAKAT models ABRALINE
A reliable and functional solution:
The industrial applications require more and more a control of the costs and an optimum reliability. With SAEB ERAKAT, you can supply the machine of cutting permanently and thus avoid all stops of production related to the recharging of sand.
A technology with any test:
SAEB ERAKAT is the perfect system to feed the system of Abrasif cutting uninterrupted. It allows an autonomy of 400 kg and the supply pressure in air perhaps regulated thanks to the valve of regulation of air pressure.
It also supervises the presence of sand in the hopper and the pot under pressure and emits signals of warnings visual (indicator) and messages intended for the operator.
Safety:
SAEB ERAKAT automatically stops the machine of cutting in the event of lack of abrasive (if connection is carried out) or warns the operator with a twinkling light signal. This makes it possible to avoid with the operator carrying out cycles of cutting without abrasive.
Simple installation:
SAEB ERAKAT Abraline model is a complete and autonomous system which can be connected to any machine of abrasive cutting. Its simple connection (catch 220V) and its box of piloting allows an easy use.
A strong point: Facility of use:
The use of the machines of abrasive cutting requires the control of many parameter and a regular maintenance.
With SAEB ERAKAT the user does not have any operation of maintenance, nor of parameter to be carried out. It is enough for him to reload every 400 kg of abrasive, enabling him thus to concentrate on its machine and the production.
|
|
|
|
|
|
"Easier maintenance by the newly developed abrasive dosing head!"
The new type of abrasive dosing head saves valuable time at the maintenance. An optimized constructive solution simplifies both the general handling as well as the maintenance. Juergen Moser, managing director of STM Waterjet Solutions, explains: "The abrasive dosing head in its previous design worked good, although cleaning and maintenance e.g. after a water splash back were difficult." A water splash back can occur when the jet focus sets on the Workpiece. During a water splash back water runs up the abrasive hose into the funnel towards the glass case. The new constructive solution of the abrasive dosing head, a compact unit, makes the maintenance much easier for the customers. To get to the parts to maintain no covers have to be taken off any more. The funnel under the dosing unit is composed of a simple sliding mechanism that can be taken out simply. Stoppage in the abrasive dosing head can be removed quickly and easily. Also, the venting of the glass case of the abrasive dosing head has been completely redesigned. The upper cap presents a specially developed venting profile in order to avoid building up pressure in the inside of the glass case.
Techncal data DA 200/08:
Dosing system for abrasive material between 0,1mm - 0,5mm grain size
Dosing range from 0-600 g/min
COntrolled pneumatically
Repeat accuracy +/- 3%
|
|
In order to optimise the cutting speed and quality Resato offers an electronic abrasive feeder system, mounted on the portal of the cutting table close to the cutting head. This system guarantees a reliable and continuously adjustable abrasive flow rate to the cutting head.
The abrasive flow can be controlled from the CNC control panel and can be adjusted during the cutting process. The system offers possibilities to directly and automatically set the abrasive flow rate supplied to the cutting head from the Resato Powercam cutting software. The flow rate is adjustable from 100 to 1000 grams per minute.
The system also offers the possibility to automatically switch from a low abrasive rate to a high rate. This can be important for materials like glass, for which a low pressure must pierce the glass at a low abrasive flow rate. The flow rate can then be increased at the start of the cutting movement.
|
|
The REOVIB MFS 168 series of variable-frequency regulators are specially designed for controlling vibratory feeders. The units produce a highly stable output frequency that is adjustable in 0.1 Hz increments. Manual "tuning" time of the mechanical feed system is significantly reduced. The sinusoidal output means that the feeder runs quietly and provides gentle product handling characteristics. Settings are adjusted by using a touch-panel and an integrated digital display. The feed rate set-point can be adjusted in several ways, including the use of 0 - 10V or 0(4) - 20 mA signals. User settings can be stored and recalled. Depending on the controller version there are functions available for track-sensor control and constant amplitude control, which maintains a constant feed-rate irrespective load variations on the feeder. All electrical connections are brought out to terminals located in the front panel. The enclosure is designed for panel mounting.
|
|
|
|
|
|
The AD-4826 is a feeder controller with model predictive control technology that delivers superior performance when compared with PID control devices.
Model predictive control is a method of process control to determine a manipulated variable that enables a process variable to reach a set point by predicting future changes in a process using models of the controlled object’s behavior. The internal model is used to predict if any deviation from the set point will occur in the immediate future when process control is continued with the current manipulated variable. If a deviation is predicted, an adjusted manipulated variable is output and sent to the controlled object.
Unlike PID control, which executes a correction after a control deviation occurs, model predictive control predicts a deviation in advance using a model of the system’s behavior to enable stable process control while avoiding hunting (unstable movement). The extraordinary advantages of model predictive control include process control stability, disturbance cancellation, improved response to changes, improved set-point-following capability and high tolerance to the influence of changes in a process.
The AD-4826 can perform model predictive control with a screw feeder, circle feeder, table feeder or rotary feeder that has been controlled with PID control (up to 4 feeders can be used with one AD-4826 device).
Please see the AD-4826 catalog for further details.
|
|
|
The 977CM - Current Monitoring Pulsed DC Controller, brings together powerful long-range ionisation; closed-loop feedback; self-monitoring and remote reporting. A complete package, unique to Meech. Self-monitoring and adjustment of performance allows optimum control of static for much longer periods than previously possible. Local display and output signals alert operators to the need to clean the equipment.
|
|
|
The Model 977v3 Pulsed DC Controller has been designed to operate with the full industrial range of Meech Pulsed DC static elimination equipment. It is light and compact but able to cope with the most technically demanding industrial applications. In addition to the ability to control power output, frequency and polarity, the 977v3 also offers alarm and remote monitoring and control functionality. A new feature of the 977v3 is an 8- way DIN for connection of an ion balance sensor and feedback system. Patent No. ZL200530000278.0
|
|
|
The Model 233v3 Pulsed DC Controller has been designed to operate with the Series 200 range of ionisers for ESD applications. The 233v3 is light, compact and features lockable plug and socket connectors for quick release. It also provides the option of Steady State DC (SSDC) output.
|
|
ELECTRONIC CONTROL FEATURES
100% duty cycle
Superior Accuracy (1/2% over full range)
Compact electronic and mechanical design
No clutches or brakes
Multiple size plunger / flow capability
Severe duty design standard
Local micrometer stroke indication
Split signal capacity (standard, field adjustable)
Direct or reverse acting (standard, field adjustable)
Each side can operate independently or in unison
Adjustable feedback signal to tune output
Low maintenance
No overshoot or hunting
Wall and panel mount remote controllers (w/indication) available
|
|
|
|
|
|
MC AUTOMAZIONI is glad introducing you a new machine allows to fold the top of the bag made by a vertical machine integrated with the line, here below described :
Station 1 : The bag comes fully of the products from the vertical ffs integrated with the line, bag with the top side open (not welded), the system keeps the bag on stand up position and progresses through a line with cups
Station 2 : a cold jaws takes the top of the bag and shake it in order to adjust the product inside the bag
Station 3 : A device such the air inside the bag then seal the top side of the bag
Station 4 : a rotating double-head performs the double folding of the top of the bag already welded
Station 5 : label applicator to apply a reclosable label on the top side of the bag, keeping the double fold top seal close to the bag
Details :
• Length (high) of the bag : Min 150 mm – Max 350 mm
• No pillow bag workable with this kind of machine
Optionals on request :
1. Label applicator : here above included;
2. Printer unit : not included
3. Bottom side bag label applicator : not included
4. Front / back side bag label applicator : not included
|
|
JBC2
Packaging machine JBC 2 is used for packing of tea into the flat bags with thread and label. Ready tea bags are automaticly inserded into a box. Machine drive is electomechanic. For tea preparation the cutting machine RC1 or RC 2 can be used.
Machine speed : 120 cykles/min
Bag width : 50 mm
Bag length : 60 mm
Machine weight : 450 kg
Power requirement : 1,9 kVA
|
|
Machine HV1 with one-lane linear wiegher DV1
The vertical hose packaging machine HNXB is appointed for packing the stick and cross pack. The bag is made in the machine from the roll of printed heat sealable packing material. The foil is cut up in accordance with number of tubes, after the bag forming on the tubes, and product is filled into the bags.
Machine output: max.18 cycles/min.
Bag dimension: max. width 203 mm/max. length 300 mm
Machine accessories:
- in feed conveyor PV1 with the hopper
- out feed conveyor PO1
- printing device
- device for gas flushing
- euro-hole
- dosers integration
|
|
| ... products without technical information |
| |
24-42 Belt Feeder
by Highland Machinery
Standard Features:
* Designed for 36", 42", or 48" belts
* Eliminates the Tailpiece
* Belt moves made quick and easy
* Very little maintenance or downtime
* Conveyor driven by existing belt
* Eliminates electric motor on machines up to 320 tons per hour
* Three-way dumping
* Unloading time of 7 1/2 ton car: approximately 24 seconds
Options:
* 20 to 74 HP electric motor for conveyor
* With or without pick breaker
|
|
Crawler Drive Feeder Breaker by Highland Machinery
Standard Features:
* Model CDFB 50 or 56
- Conveyor widths:
50" (1250mm)
56" (1400mm)
* Crawler Drive:
- Planetary torque hub
* Breaker and conveyor drive:
*Hydraulic or Electric
- Electric drive uses a magnetic, torque-limiting coupling to protect conveyor assembly. Both hydraulic and electric drives are alignment free and have no chains to maintain
* PLC Logic Controls
* Up to 1200tph production capacity
* Fire suppression
* Heavy gauge steel frame
Options:
* Attached belt return pully assembly
* Stabilizing jacks
* Auto-lube system
* Chromium carbide deck plating
* Explosion proof
* Other options available upon request
|
|
 see the results for the following category : AC drives |
|
|
