|
|
Water Soluble Purge Film
British manufactured product, it comes in a kit comprising:
A 20 metre length of 1 metre wide film folded in half and wound on a spool.
Two bottles of the adhesive.
A slitting knife to quickly cut the dams.
A comprehensive manual with instructions for use with hints and tips for weld purging.
Description applies to standard Purge Film Kit.
The use of Water Soluble Film for manufacture of purging dams is well proven and the Water Soluble Film gives superior results over all other water soluble products.
It can be used for:
Stainless, Duplex and chrome-moly steels & Titanium.
The purge material makes dams which produce an impenetrable purge barrier but which can easily be washed away when hydrostatically testing the pipe or just by normal wash out.
It dissolves away completely without leaving any fibres to clog up filters or other sensitive parts in a system and it is strong in all directions so that it can maintain a good gas barrier throughout the purging process.
Trace element certification can be provided to show that purge film does not contain any harmful elements and that the quantity of halides is well below the permissible levels.
The film and adhesive are completely biodegradable and all packaging materials are recyclable.
Further information can be downloaded in PDF form available in our download section.
Contact our factory for more details on bulk order savings.
|
|
Water Soluble Purge Film
British manufactured product, it comes in a kit comprising:
A 20 metre length of 1 metre wide film folded in half and wound on a spool.
Two bottles of the adhesive.
A slitting knife to quickly cut the dams.
A comprehensive manual with instructions for use with hints and tips for weld purging.
Description applies to standard Purge Film Kit.
The use of Water Soluble Film for manufacture of purging dams is well proven and the Water Soluble Film gives superior results over all other water soluble products.
It can be used for:
Stainless, Duplex and chrome-moly steels & Titanium.
The purge material makes dams which produce an impenetrable purge barrier but which can easily be washed away when hydrostatically testing the pipe or just by normal wash out.
It dissolves away completely without leaving any fibres to clog up filters or other sensitive parts in a system and it is strong in all directions so that it can maintain a good gas barrier throughout the purging process.
Trace element certification can be provided to show that purge film does not contain any harmful elements and that the quantity of halides is well below the permissible levels.
The film and adhesive are completely biodegradable and all packaging materials are recyclable.
Further information can be downloaded in PDF form available in our download section.
Contact our factory for more details on bulk order savings.
|
|
This series of metallized polypropylene film / Polypropylene Film Foil capacitor is for higher discharge current ( Ipeak and Irms ) and surge voltage application.
Capacitance range : 0.001uF to 5uF
Voltage range : 160Vdc to 2000Vdc / 100Vac to 600Vac
Catalogue can be download in our website. http://www.filmcapacitor-st.com
Prompt Delivery, worldwide !
For further details and quotation please contact us : info@filmcapacitor-st.com |
|
Most of our capacitors can be modified according to customer's application and circuitry - electrically and mechanically, size, electrical connection and capacitor installation.
This way customers can have most benefit from our capacitors, not just price but electrically and mechanically etc...
Most of these capacitors can withstand higher frequency, voltage and discharge current circuitry application.
Power Film Capacitor
High Voltage Film Capacitor
Pulse Grade Capacitor
Pulse Capacitor
Snubber Capacitor
RC Snubber
Filter Capacitor
Feed Thru Capacitor
Lighting Capacitor
Motor Run Capacitor : Cylindrical type
Capacitors Network
Axial Lead Film Capacitor
Polypropylene Capacitor
Film Foil Capacitor
Welding Capacitor
Furnace Capacitor
Catalogue can be download in our website. http://www.filmcapacitor-st.com
We even support small quantity order.
Prompt Delivery, worldwide !
For further details and quotation please contact us : info@filmcapacitor-st.com
|
|
Metallized polyester capacitors
Metallized polypropylen capacitors
Polypropylen capacitors
Polyester capacitors |
|
Features:
· Axial and radial plastic case designs and axial metal case types
· Metallised polyester, polypropylene, and polycarbonate dielectrics
· Voltage ranges from 50Vdc to 500Vac
· Tight tolerances available down to 1%
· Custom design capability |
|
| SBE designs and manufactures the most reliable Film Capacitor products for your application. In addition to what you find here we also specialize in the design, development and manufacturing of application specific products. Non-standard capacitance values, tight tolerance, specific form factors, etc. are our specialty! Our technical staff can also work with you to develop an application specific power capacitor package to meet your demanding requirements. |
|
| SBE designs and manufactures the most reliable Film Capacitor products for your application. In addition to what you find here we also specialize in the design, development and manufacturing of application specific products. Non-standard capacitance values, tight tolerance, specific form factors, etc. are our specialty! Our technical staff can also work with you to develop an application specific power capacitor package to meet your demanding requirements. |
|
METAL FILM (PRECISION) RN73 - Metal Film Flat Chip Resistors
Features:
- SMD metal film resistors.
- RN73S: Products with improved moisture resistance.
- High precision type ±0.05% is available with standard products.
- High performance T.C.R. ±5×10E-6/K is available.
- Low current noise.
- Suitable for control circuits in various industrial equipment.
- Suitable for both flow and reflow solderings. However, 1E type is available only for reflow soldering.
- Products with lead free termination meet EU-RoHS requirements |
|
We produce a variety of high quality resistors from general-purpose resistors to power resistors. We would like to respond to all the needs of the SMD resistors.
Thick Film Chip Resistors
Anti Sulfuration Chip Resistors
Thin Film Chip Resistors
Chip Resistors for High Frequency Circuit
Current Sense Resistors/Low Resistance Resistors
Fusing Resistors
Laser Trimmable Resistors
Linear P.T.C. Resistors/Thermal sensers
Platinum thermal sensors
MELF Type Resistors/Cylindrical Chip
Resistor Networks/Resistor Array
Common Specification |
|
THICK FILM(GENERAL PURPOSE)RK73B - Flat Chip Resistors
Features:
- Small size and light weight.
- Excellent heat resistance and weather resistance are ensured by the use of metal glaze thick film.
- High stability and high reliability with the triple-layer structure of electrode.
- Applicable to various kinds of automatic mounters for taping, etc.
- Suitable for both flow and reflow solderings.
- Products with lead free termination meet EU-RoHS requirements. EU RoHS regulation is not intended for Pbglass contained in electrode, resistor element and glass. |
|
Snubber Capacitor – Axial Leads
Film Dielectric :
Double metallized internal serial film + Metallized Polypropylene Film
Application :
- power supply and welding equipment
- Protecting Thyristor against transient voltage and current
- Applications where high dv/dt is encountered
STP-01QE Electrical wires + Terminals options for easier installation
STP-01Q Tin-plated copper lead wires - PCB soldering
Capacitance : 0.01uF ~ 4.7uF at 1kHz +25C
Capacitance Tolerance : ±5%(J), ±10% (K)
Voltage : 600Vdc~3000Vdc / 275Vac~750Vac
Catalogue can be download in our website. http://www.filmcapacitor-st.com
Prompt Delivery, worldwide !
For details, please contact info@filmcapacitor-st.com |
|
It is designed to
- handle high peak pulse current
- ( Gate turn-off Thyristor ) GTO Snubber / Commutation protection
- Motor Control and Static Drive application
- With build-in M6 / M8 thread stub for easy connection
Catalogue can be download in our website. http://www.filmcapacitor-st.com
We even support small quantity order.
Prompt Delivery, worldwide !
For further details and quotation please contact us : info@filmcapacitor-st.com |
|
Protect IGBT modules against voltage and current transients and applications where high dv/dt is encountered.
SMKP2 series :
Voltage Range :
1000Vdc ~ 2000Vdc
500Vac ~ 650Vac
Capacitance Range : 0.1 uF - 2 uF
SMKP3 series :
Voltage Range :
1000Vdc ~ 3500Vdc
480Vac ~ 800Vac
Capacitance Range : 0.2 uF - 4.5 uF
very Low ESR and ESL self-Inductance
High rms Current
Construction :
- Extended double sided metallized carrier film design with internal series connection and metallized film construction
- Direct Mount IGBT
Catalogue can be download in our website. http://www.filmcapacitor-st.com
We support small quantity order.
Prompt Delivery, worldwide !
For further details and quotation please contact us : info@filmcapacitor-st.com |
|
This series of capacitor is for SCR Thyristor Snubbering and Commutation.
- Plastic Case with Epoxy Resin - dry construction
- Voltage range : 500Vac ~ 1350Vac / 900V ~ 2300Vdc
- Capacitance : 0.1uF ~ 50uF
- Electrical Connection : M4, M6, M8 Bolt or Tab Terminals
- with M8 Bolt threads at capacitor bottom for capactior installation
Catalogue can be download in our website. http://www.filmcapacitor-st.com
We even support small quantity order.
Prompt Delivery, worldwide !
For details, please contact info@filmcapacitor-st.com |
|
| ... products without technical information |
| |
Film Applicator COATMASTER 509 MC I
Intended for the application of even paint films of defined thickness on glass panes, test charts or foils. Control box on flexible lead with foil keyboard and LCD to control the working movement, to determine the operation mode and to select the working parameters. The version 509 MC III is a combined Film Applicator and Drying Time Recorder. |
|
Film Applicator and Drying Time Recorder COATMASTER 509 MC III
Besides its function as a film applicator, this combined instrument also offers the possibility to evaluate the degree of dryness of 7 identical or different paint specimens simultaneously. Most versatile instrument due to a variety of accessories. Mobile control box with LCD to select the working movement, the operation mode as well as the working parameters. |
|
Friction Testers 1 kN (225 lbf)
NEW PRODUCT: Dedicated Friction Tester for Accurate Measurement of Static and Kinetic Coefficient of Friction
For use in the packaging and printing industries, the Lloyd Instruments FTPlus friction tester accurately measures static and kinetic coefficient of friction. These values are of importance in a wide range of industries including blown film, plastic sheet, paper and coating manufacture.
The FTPlus is a dedicated friction tester conforming to the requirements of ASTM D1894, ISO 8295 and TAPPI T549. The tester includes these standards as user configurable tests, with a further seven available for user custom configuration.
When using NEXYGENPlus material test and data analysis software , the FTPlus may also be configured as a universal material tester to perform tensile, compression, flexural and other mechanical tests up to 1 kN (225 lbf).
|
|
Model: CMT2501;CMT2102;CMT2202;CMT2502;CMT2103;CMT2203;CMT2503
Capacity: 50N; 100N; 200N; 500N; 1kN; 2kN; 5kN
Features:
SANS's line of desktop Electromechanical Materials Testing Machines are designed to test a wide spectrum of materials including metals, plastics, rubber, textiles, paper, yarn, wire, adhesives, ceramics, timber, foils, composites and finished components in tension, compression, flexure or shear. Maximum frame capacities are from 50N to 5kN.
All testing hardware is fully complemented by SANS developed software that turns your hardware into a sophisticated quality analysis system. Be sure to examine the software products to determine which package is right for your application.
Easy to use and operate
1. High accuracy: Measurement accuracy of testing speed, load, crosshead displacement can meet or surpass +0.5% of reading
2. High sampling rate: The sampling rate 50Hz, reach advanced international level
3. High load resolution: Better than 1/300000, no step, and unchanged in full range
4. Multi-cycle control modes: Control system is capable in load cycle, displacement cycle, extensometer cycle or their combination
5. High security: The system can inspect and protect automatically once overload, over currency; Position limiter; Emergency stop
6. Comply with different standards, such as ASTM, BS, JIS, ISO, IEC |
|
Dry Film Thickness Gauge acc. to Rossmann, Model 233
The difference in level between substrate and film surface is gauged by the contact point of the dial indicator.
Measuring range 0-1000 ìm in 5 ìm divisions. |
|
Wet and Dry Film Thickness Gauge acc. to Rossmann, Model 296
The difference in level between substrate and film surface is gauged by the contact point of the dial indicator. Measuring range 0-1000 ìm in 5 ìm divisions. For measurements on wet films the contact point is raised by means of a knurled screw and then lowered until it touches the surface of the wet film. |
|
Wet Film Thickness Gauge, Model 234
A hardened and ground double wheel with an eccentric cam in the centre is rolled over a newly applied film. The wetting line on the centre cam is read on a scale as wet film thickness. Total measuring range: 1500 ìm, available in 8 different subranges. |
|
|
|
see the results for the following category
