|
|
Hand Held Electronic Force Gauge
An ergonomically designed hand held force gauge.
ADVANTAGES
User comfort "'Ergonomically" designed - for ease of use
One piece unit
Very high accuracy
Swivel head allows access to difficult to reach positions
As with all splicer procedures, it is important to eliminate as many variables as possible in order to achieve optimum welding consistently over long periods.
Electrode force is one of the critical parameters in obtaining repeatable, reliable resistance spot welds.
Force can vary because of variable factory air pressure, water in the air lines causing air cylinders to deteriorate and loss of air pressure due to worn professional seals.
This self contained instrument uses a cell with a force transducer to provide accurate digital read out for auditing weld electrode forces.
Accuracy of this instrument is better than 0.2% and can be switched to read 0-2000 kg, 0-20.00 kN or 0-4400lbs.
In cases of difficult access the head of the swivel head gauge can be swiveled at least ±72º up or down and rotates at least ±90º. Once the desired position is reached it can be fixed by a simple hand tightened knob. A 90 mm long handle is provided for optional use with 2 mountain positions either in-line or at 90º.
A support wrist strap is attached to the gauge so that in the event that it is forced out of the operators hand by misaligned electrodes, it need not fall to the floor and be damaged. |
|
Faults in splicer tongs or incorrect process parameters in welding can result in production device waste or defective parts. Checking the industrial electrode force periodically permits spark malfunctions to be detected at an early stage so that repairs can be carried out in good time.
The new Type 9833A test sensor allows precise and reliable measurements to be carried out with minimal electrode gaps. The built-in charge amplifier simplifies the task of mounting and helps to ensure the reliability required by the automobile industry.
|
|
| The MM-601A is an industrial electrode force measuring device for resistance welding devices. By changing the load sell sensor, it is capable of measuring from 0.20 kg to 950 kg (0.44 to 2111 lbs) of weld pressure. |
|
The quality of a spot weld depends on the force applied by the electrodes together with the value of the splicer current. For control programs, measuring the force applied by the electrodes is extremely important for maintaining constant production conditions. The Welding Professional tester instrument is designed for measuring the closing force on welding heads, which can be used either for setting up or for periodical maintenance. The tips are exchangeable for measuring the force applied by different forms of electrodes; the lowest closing dimension is 3 mm.
Different models are available for measuring 0–5000N up to 0-20000N. The new tool has all the ruggedness, quality and accuracy of the other tools in the CENTOR family, specially designed for taking “nomad” measurements in production shops.
|
|
| ... products without technical information |
| |
The sensor is suited for torsion measurements and the measurement of reaction moments for orthopaedic industrial measuring devices. It is applicable for measurements of friction forces.
The strain gage full bridge measure the torsion movement appearing in the tube of the lattice structure. |
|
X-Ray Detection offer a number of advantages over beta and gamma sensors, including greater precision, better streak detection, long-term stability and non-nuclear technology.
Since the X-ray sensor's energy output can be changed via digital power regulation, it can be optimized to run very efficiently over a wide range of product weights and thicknesses. |
|
| The new force sensor converts pressure, weight and forces towards a measurable electrical quantity: resistance. As to construction, Manufacturer of force sensors are comparable with the Clicktouch membrane switches. While combining this top technology with well-controlled production processes, detection are made that are also thin, light and flexible. Furthermore, these can be designed completely customised and can be combined with and within a membrane switch professional keyboard. |
|
... see all the products in the category
Keyboards
|
Chatillon® DFE Series
The Chatillon® DFE Series is a compact, easy-to-use force gauge designed for economy applications without compromising functionality. Ideal for handheld or test stand applications, the DFE is available with capacities from 2 lbf (1 kgf, 10 N) to 500 lbf (250 kgf, 2500 N). The DFE features an integral loadcell with a measurement accuracy of better than 0.25% full scale. A large, easy-to-read, high resolution dot matrix LCD display supports a variety of standard gauge functions including normal and peak readings, high/low limits, setpoints, pass/fail results, statistical results, loadcell actuation and direction. Loads are displayed in ozf, gf, lbf, kgf and N units. The display can be inverted and displayed results may be "hidden" from the operator. The DFE gauge may be specified with or without RS232 serial communication. All DFE Series force gauges come with a carrying case, battery adapter/charger, testing accessories and NIST Certificate of Calibration with data. Uncertainty data per ISO/IEC 17025 is supplied standard.
Standard Gauge Measurement Functions
Normal Tensile and Compression Measurement
Peak Tension and Compression Measurement
Pass-Fail Limits
High & Low Setpoint Limits
Statistical Calculations
|
|
Mecmesin digital force gauges are state of the art instruments, specifically designed to measure force in tension and compression (push or pull) with optimum precision and performance.
The Advanced Force Gauge (Mark 4) is the most versatile and fully-featured instrument offered by Mecmesin. The AFG comprises of 10 different models ranging from 2.5N to 2.5KN with the added ability of 1st peak and ultimate peak hold. The bi-directional interface (RS232, Mitutoyo, Analogue) ensures full data transfer between PC's, data-loggers and Mecmesin stands. All AFG's feature superb accuracy at ±0.1% of full scale and a industrial sampling rate of 5,000 times per second.
The BFG (Basic Force Gauge) range of rugged, flexible and reliable instruments are designed for easy operation and outstanding force measurement performance - all at a budget price. A precise and reliable instrument, the BFG features accuracy at ±0.25% of full scale and a sampling rate of 1,000 times per second.
The CFG (Compact Force Gauge) is a pocket-sized, lightweight and low-cost force gauge, ideal for performing elementary tension and compression testing. The CFG is available in 3 capacities and features include a data sampling rate of 10Hz, accuracy of ±0.5% and versatile measurement options lbf, N, ozf, kgf and gf, with a resolution of 1:1000 or better.
Used either handheld or combined with a test stand and accessories they offer a complete testing solution for a virtually limitless range of tension and compression applications. |
|
- The cell is manufactured in aluminium alloy with HT steel bushes.
- The cell incorporates an eight gauge bridge together with
associated electronics and a 9 volt PP3 non-rechargeable battery.
- Built into the load cell manufacturers is a large [20mm] 3.5 digit liquid
industrial crystal display mounted on the front of the cell for easy reading
from the operator's position.
- The load cell is self contained and has no external cabling.
- A battery switch is provided on the rear of the cell to prolong
battery life when the cell is out of use.
- All set up and calibration data is retained when switched off.
- The cell is automatically switched off after 15 minutes to
prolong battery life.
- Battery life - typically 50 hours. |
|
Simple digital force gauge : CENTOR FIRST
Simple and yet complete, the CENTOR First force gauge uses efficient technology to simplify force measurements, in tension and compression ...
Graphical force gauge : CENTOR EASY
Simple and complete,the CENTOR "Easy" is the best instrument for measuring in the workshop.The screen provides simultaneous readout of the current and maximum values as well as...
Advanced graphic dynamometer : CENTOR STAR
The CENTOR "Star"has many functions.It will become your preferred force measurement tool.The graphic screen professional displays the complete Force=F(t) curve ,...
Two detection force gauge : CENTOR DUAL
It has all the functions of an STAR force gauge, but its calculation power enables it to record values sent by 2 different sensors simultaneously |
|
It is the force measuring instrument of the electronic formula which can measure both tension and compression power by single axis.
It excels in a response and measured value is displayed in an instant. Since it is a digital instrument, various functions are available. For example, the memory function which can memorize up to 1000 measuring data, comparator function which can program high and low set points. ZP series has USB output function and it becomes easy to connect a computer. Using optional software, it is possible to make precise force-time chart by high speed USB communication. By using with a test stand, it corresponds to a large area from the field of a quality control to the field of research and development.
|
|
25.4mm LCD display
Accuracy 0,1% Emax
Shackles included (D150E-12 excluded)
Professional remote control included
Radio transmission LPD 869,87 MHz (available)
Capacities (Kg.)
1.000, 3.200, 6.500, 12.000
|
|
It is the force measuring instrument of the mechanical type of the power feeder needlessness which can measure tension and compression force easily and correctly.
Based on our long history of technical achievement as a force gauge pioneer with the variety of know-how, IMADA mechanical force gauge is produced under advanced technology and severe quality control, and maintain early high precision for a long period of time. |
|
Dial force gauge : NK
This dial force gauge has been designed to meet demand for a reasonably priced instrument that is robust and reliable.
It can be used in tension and compression, to easily carry out the main force measurement tests required in the fields of mechanical and electronic engineering production.
Spring balance : SMS
Simple, robust, and compact, the spring balance can be used in various fields...
Sensing force gauge : UT DM
This small sensing force gauge is an essential tool for all laboratories, design offices, workshops, after-sales departments, etc.
|
|
TesT develops and validates systems, in line with the constantly growing requirements and aim at the needs of its customers to guarantee a complete and competent solution of the highest level. We engage ourselves to reach a high customer satisfaction in a surrounding field of prevention and continuous improvement. The new model 322 is the High end product of most modern measur-ing technique and offers an unusual price performance ratio.
dynamometers integrate a high-resolution force detector as well as processor-controlled electronics with most modern professional software, based on a wide experience and the requirements of our customers.
The main area of application for these devices is research and development, production and quality assurance. Particularly operating forces as well as stability of construction and functional units will be measured.
Examples
Springs, switches, levers, professional fasteners, precision mechanics, foods, cosmetics, vehicles, medical technology, and many more.
|
|
| Radio contact and intreface RS 232, Utmost precision (0.2% of the capac. nominal), recording of the maximum value, endurance battery 200 working hour, posting LCD, warning of overload, indicator charges battery, protection IP 54, coeff of safety 500% of the CMU. |
|
| ... products without technical information |
| |
Features:
- Discontinuous level measurement for nearly all kinds of bulk goods and interface measurement
- Simple and reliable measuring principle
- Sensor weights in various designs suitable for every application
- Insensitive to dust, dielectricity, conductivity, humidity, caking
- Easy installation, maintenance-free operation
- Very precise results covering large measuring ranges
- Suitable in hazardous locations (dust explosion)
- Detection of solids in liquids |
|
| ... products without technical information |
| |
RSIC Professional software
R-SIC is a "resident"software that allows the RS232 port on a PC to be configured to manage the connection to spreadsheet software such as EXCEL.
Centor Manager Software
CENTOR Manager is a simple, user-friendly utility that enables you to communicate with your CENTOR Easy, Star or Dual memory. |
|
INS TC2000 is a dynamic weighing system for supplier of forklift trucks. INS TC2000 is developed for lifting units where robustness and reliability have the highest priority
We produce mobile weighing systems where accuracy, reliability and sturdiness under heavy use have the highest priority. Normally the better accuracy a system has the more sensitive it is to shock, vibrations and heavy use. The balance between those parameters has made INS well-known and respected all across Europe. |
|
| TL5 Intelligent TEST LOAD for fuel accumulators and professional batteries is a passive electronic load with microprocessor intelligence. Two models, the TL5-20 and TL5-40 are available working in the 0-20.00A and 0-40.00A ranges respectively. Both models have the ability to briefly interrupt current and measure resistance free cell potential following a selectable delay. There are additional inputs for reference electrode and temperature sensor manufacturers. Further expansion via the I/O connector suppliers provides an additional eight digital inputs, eight digital outputs and two analog inputs. The onboard microprocessor controls time keeping, | | |
