|
|
G20C Welding gun
Welding gun working with the DischargE Condenser Process Contact mode, fitting on all SGC generators for Ø 2 to 8 mm studs.
|
|
Stud welding guns:
P-NS 20 BHD
High-performance gun for drawn-arc welding
Gun power ø 32 mm
Length 330 mm
Weight 3,4 kg
Standard gun for drawn-arc welding
Gun power ø 16 mm
Length 190 mm
Weight 1,6 kg
|
|
| Heron transgun---hanging spot welding machine, ZDN-025/035/040/050-005A-0001, the transformer is powerfull and pack design, we have X type and C type gun with different arm style, apply to the automotive car body weld and the other steel weld field |
|
Based on the pneumatic clamp concept, this system is designed for better accessibility because of the narrow form.
The electrode arm opens to 90° allowing easy part load/unload thus eliminating additional slides or pivot units.
The welding clamp sits in a equalizing mount and generates welding forces of up to 600 kg.
Product Lines WS 63, WS 80
|
|
| ... products without technical information |
| |
Process Description
Plasma Spray is perhaps the most flexible of all of the thermal spray processes as it can develop sufficient energy to melt any material. Since it uses powder as the coating feedstock, the number of coating materials that can be used in the plasma spray process is almost unlimited. A high frequency arc is ignited between an anode (nozzle) and a cathode (electrode). Process gases (generally mixtures of argon, nitrogen, hydrogen and helium) flowing between them is ionized to become a plume of hot plasma gas with that exceed the surface of the sun of 6,600 °C to 16,600 °C (12,000 °F to 30,000 °F). When the coating material is injected into the gas plume, it is melted and propelled towards the target substrate.
Features of the Atmospheric Plasma Spray Process:
- Large choice of coating materials, including metals, alloys, ceramics, cermets, carbides and others.
- Coating systems are possible, using layers of different materials.
- Produces surfaces for a wide variety of applications, including resistance to many different types or wear and corrosion mechanisms, desirable thermal or electrical characteristics, and surface restoration and dimensional control.
- Excellent control of coating thickness and surface characteristics, such as porosity and hardness .
- No heat affected zone or component distortion.
- High deposition rate.
- High bond of the coating to the substrate.
- Coating of complex geometries.
- Easy masking of areas that should not be coated.
- Process can be fully automated.
- Coating of internal geometries possible
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Microdots Marking Systems, the model P.1 has a window area of 65x35mm (2.5x1.4In). Here P.1 is displayed as portable marking machine.
Technical Details:
This technology can mark up to a 1mm depth and on surfaces irregularities up to 14mm (0.5In).
All models are available:
as portable handy tools,
as integrated systems,
as fixed structures.
Easy to program, P.1 can manage all following functions:
1000 programs in memory,
texts in line, angular, mirror,
arc-texts,
serial numbers,
batches of production,
time and date,
working shifts,
customized codes,
preview, diagnostic and many more.
The excellent management of the mechanical movements allows marking:
logos,
2D Matrix and OCR codes,
fonts per dots 5x7 and 11x16,
continuous line fonts.
The flexibility of the software allows communication:
with PC direct and wireless,
through RS232 / RS485,
from/to PLC,
from Bar Code readers,
TXT files,
integrated floppy disk port.
Low maintenance, reliable and friendly use, all Microdots Marking Machines are supplied complete with programmable controller with JOG function, tungsten-carbide stylus in 3mm or 6mm diameter, filter and air regulator and all accessories to suit customers needs.
|
|
Our tagging gun is famous for textile industry where price tagging is necessary.
Our tag gun has light weight & simple design to fit into various working environment. Moreover, we offer affordable prices by using condenced assembly process.
Two Types: Fine needle & Regular needle
Two models: Ace (with no bolt) & Plus (with bolts)
For more information, please do not hesitate to contact our office.
|
|
Pistol-Grip Attachment allows paste to be applied manually to copper and brass assembly
Compressed air from control panel is introduced to upper gun body, forcing circular piston and attached piston rod upward against coil spring. Pressurized paste alloy (from reservoir) fills vacant space between piston rod tip and nozzle orifice.
As timer de-energizes, compressed air is exhausted, and coil spring returns piston and rod to closed position. Piston rod tip displaces paste alloy through nozzle orifice and seals opening until next cycle. Precise deposit size is obtained by adjusting control panel timer, paste pressure, and length of piston rod stroke. |
|
FinishPro 42XP - 15 Gauge
Extreme work calls for extreme tools, and the FinishPro® 42XP is this tool! Replacing the work horse FinishPro® 41XP, the FinishPro 42XP has been redesigned with a new long life driver, new mainbody with improved durability, improved trigger ergonomics with reduced trigger reach. All backed by SENCO¹s NEW 5-Year Warranty.
Features:
Thumb Wheel Depth of Drive
Stretch Comfort Grip
No Mar Pad
Never-Lube
Magnesium Housing
Easy Clear Jam Clearing
360 Degree Adjustable Exhaust
|
|
Cordless Gas Framing Nailer GT90CH
The GT90CH cordless clipped head gas framer combines the convenience of a cordless tool with the power and utility of a pneumatic framing nailer. This well-balanced framing nailer has the power to complete all of your framing and sheathing requirements. Perfect for framing crews, re-modelers, punch-out or service crews who need to un-tether from the hassel of a hose and compressor. Built with components that ensure all day duribility and reliability, the GT90CH comes with a Ni-MH battery, battery charger, service tools, durable plastic case and features a 2-year limited warranty.
|
|
TACKER N 200 ZH 16 with POGOSTICK
Well suited for nailing cardboard with large sized staples
23 mm crown size.
Loading capacity: 150 king size staples.
To be used for fixing wood, strong cardboard, roofing felt,
damping plates. Appliances: carton making, building and
carpenter work, setting up wooden cases, roofing.
Technical Data: 2.2 kg, Dimensions 335 x 250 mm,
9 stapling operations/second
Air pressure: 5.5 - 8 bars, air consumption: 1.5 NL./stapling.
Depending upon the thickness of the material
the ZH-staples can be offered with leg lengths of
19, 25, 30, 38 45 mm.
Connection with a POGOSTICK:
Combined with a holding bar with double grip and trigger
the pneumatic tacker can be inserted into oversized cartons.
Length 900 mm, weight 2.1 kg.
|
|
| ... products without technical information |
| |
|
Ionizing air guns neutralise static charges on several materials and clean the surface using ionized compressed air. Neutralising the static charges makes it easier to blow-clean the surface and prevents dust and dirt particles from being reattracted. The compressed air used for this purpose must be free from oil and water. The guns are connected to a power unit which supplies the required high voltage.
|
|
Electrostatic charges occurring during production processes often cause
severe disruptions, reducing production speed and product quality.
The R36 ion blower nozzle and the ion blower pistol PR36 have an outstanding range effect.
The ion blower nozzle is used in fixed installations; the ion blower pistol is
designed for manual use.
Charged surfaces which attract dirt particles can be effectively discharged with the help of the ion blower nozzle resp. the ion blower pistol, keeping the surfaces free of dust before converting and finishing.
The compact design of the new ion blower nozzle and its high efficiency allow a wide variety of applications.
The benefits:
• high degree of discharging efficiency
• compact design
• adapter design
• small dimensions
• easy installation
• flow-optimized air nozzle
|
|
| ... products without technical information |
| |
Suction Gun
The Suction Gun will effectively remove debris, swarf, fibres and liquids. Interchangeable nozzles make it extremely easy to use it over a long period of time. No maintenance is required.
Vac-Blast Cleaner
This ergonomic unit controls suction and air blow. It is ideal for removing virtually inaccessible particles and liquids from blind holes.
Technical Data
Supply: Compressed air 6 bar
Types: Normal working conditions, cleanroom version
These small compressed air-driven devices are often used in assembling areas or for maintenance. Individual nozzles are available. They may be integrated into machines that assemble precision parts.
|
|
| ... products without technical information |
| |
GA-288 Pressure Gauge (0-160 PSI)
GA-313 Pressure Gauge (0-15 PSI)
GA-316 Pressure Gauge (0-160 PSI)
GA-333 Pressure Gauge (0-100 PSI)
GA-338 Pressure Gauge (0-160 PSI)
GA-73 Pressure Gauge (0-30 PSI)
GA-77 Pressure Gauge (0-30 PSI)
HAF-507-K12 WhirlWind In-Line Filter HAF
HAR-400 Air Regulator Lockout HAR
HARG-510 Air Control Regulator HARG
HAV-500 Air Adjusting Valve HAV
HAV-501 Air Adjusting Valve w/Gauge HAV
P-H-5516 Air Adjusting Valve
|
|
| ... products without technical information |
| |
|
