|
|
An ideal tool for metal work hobbyists, DIY enthusiasts, reparation shops, demolition projects operators, metal scrap yards, street rod chassis builders, machinery works, and others who care about either of the 3 strengths of an oxy-gasoline torch: portability, fuel cost economic, and fuel availability.
oPetrol oxy-gasoline cutting torch is the progress and development in welding and cutting technology. Safety and reliability are the most outstanding advantages of substituting acetylene with gasoline. Gasoline is not only safer in its storage and transportation; it is also better in oxidization during the cutting operation. There is no back flash. The cutting fuel cost is obviously lower than acetylene. Gasoline is easy to use and available everywhere. Gasoline supply is assured. This achievement is in a leading position among technologies of its category. |
|
Design:
- Hand torches for flame cutting up to 500 mm
- Hand torches for flame gouging
- Special versions for scrap cutting
- Different sizes and different length
- Available with DIN, BS and CGA connections
- For all fuel gases
Advantages:
- Valve-forward design ensures maximum operator safety
- New valve design guarantees higher gas flow rates and enhanced cutting capacity
- Heavy-duty head avoids overheating
- New monoblock valves improve operator control and allow precise adjusting also with gloves
- Triangular arrangement of stainless steel tubes provides high durability and maximum stability
- Modular design (also with STARLET and STAR torch systems) reduces maintenance cost and downtime
Product Range:
- Hand torches for flame cutting
- Hand torches for flame gouging
- Scrap cutting torches
- Accessories, wearing parts |
|
Dual Guard(TM), Heavy Duty Cutting, Welding, and Heating Outfits
Dual Guard(TM), Heavy Duty Cutting, Welding, and Heating Toolbox Outfits
Dual Guard(TM), Heavy Duty Hand Cutting Torch Outfits
Dual Guard(TM), Medium Duty
Tough Cut(TM), Medium Duty
Tag-A-Long(TM), Portable
Versa-Torch®, HVAC/R
Quickbraze®, HVAC/R
Versa-Torch® Standard Tip Selections
Versa-Torch®/Quickbraze® Tip Selections
Handi-Heet®, Soldering & Brazing
Silver Smith(TM), Soldering & Brazing
The Little Torch®, Jewelry/Hobby
The Little Torch®, Jewelry/Hobby Caddy Kits
The Little Torch®, Jewelry/Hobby Tips and Technical Information |
|
The Koike Aronson IK series features a high speed tracing system that is capable of following a pattern at speeds of up 120 IPM. The IK series of machines support oxy/fuel and plasma cutting processes; the maximum tool load on the machine is two tools.
The IK series of machines utilize the HL-83A coordinate drive tracing system with speed ranges from 4 to 160 IPM. Options available on this machine include CNC controls, plasma systems, and cutting tables.
MACHINE FEATURES
Available cutting widths: 4', 5' and 8'
Available cutting lengths 10 and 20 feet
Versatile cutting for large and small applications |
|
| ... products without technical information |
| |
Retsch SM 2000 cutting mills are especially high performance and user-friendly machines for crushing tough, medium-hard, soft, elastic, brittle and fibrous materials. Running slowly or quickly with different rotors and hoppers, they crush a wide range of materials, eg:: waste samples, plastic parts, biological substances, food and animal feed and beverage cans. The SM 2000 mills are therefore ideal for research, testing and operational laboratories, for technical training facilities or for creating samples in production.
Further model: SM 100.
Product Advantages:
powerful size reduction, even of heterogeneous mixtures
defined final fineness
low heat build-up
wide range of accessories for universal use
central locking device
fold-back housing
easy cleaning
robust, safe design
2-year warranty, CE-conforming |
|
From lab/pilot to production requirements, Hosokawa Micron Powder Systems offers a complete line of scaleable size reduction technology for the chemical process industries.
Whether you call it size reduction, milling, pulverizing, jet milling, air milling, or simply grinding, we can help. Our broad application expertise allows us to help you select the technology that works best for your application. We are flexible enough to design and supply a complete system for the most unique applications yet our standard offerings are economical and acceptable for most chemical grinding applications.
|
|
Cutting mills are particularly well suited for comminution of soft to medium-hard, fibrous or tough materials (including plastics). They are frequently also used in the preparation of heterogeneous substance mixtures. In this type of mill, samples are comminuted through cutting and shearing. The fineness is determined by a sieve insert. In cutting mills, it should be possible to remove the grinding parts with minimal or no use of tools so that cleaning can be performed quickly and efficiently.
For control of the wearing and abrasion, hard metal tungsten carbide can also be used as the grinding tool material in place of various steels. The cutting mill combination and the power cutting mill are particularly well suited for coarse comminution (e.g. environmental work) |
|
| ... products without technical information |
| |
Ortobreton 4EM
Four-column block saw "ORTOBRETON Mod. 4EM" for marble
The block saw holds blades with diameter up to 1.700 mm.
The movement of both the spindle-holding Carnage <3 na the beam are in an oil bath, always precise, rapid and well protected.
Once the beam has reached the correct position, it is blocked laterally on
the bridges by means of a double oil-pressure device.
The two bridges move on sliding blocks with play adjustment along the
guides, which are housed inside the columns, well protected by labyrinth seals.
The spindle-holding carriage is moved horizontally by an electric motor controlled by an inverter.
The 550 mm 0 horizontal blade spindle is mounted vertically on one side of the carriage and it can be adjusted in height by a rack and pinion assembly powered by a reducer with inverter-controlledA/Cmotor.
The unit is equipped with a mechanism for the automatic compass movement of the blade.
The rectified and dynamically balanced spindle shaft guarantees an exceptional precise rotation.
|
|
PHOENIX®II 275HC
The PHOENIX®II 275HC bevel gear cutting machine is the next generation in cutting machines. The unprecedented monolithic column design is leading edge technology in chip flow, ergonomics, stiffness, cutting process, and maintainability. Pivoting the cutter spindle permits the shortest structural overhang of both the cutter and work for maximum stiffness and thermal stability. A simple chip collector is the only object below the cutter and work spindles. Chips never touch the machine structure. |
|
VSC 400 DUO WF
This gear profiling center - its design is based on the VSC series - soft finish-machines the gear profile complete, employing turning, hobbing and deburring operations. |
|
| Hypoid Lapping Machine, bringing a new dimension of features and process capability to the lapping process. This fast and flexible machine offers new levels of productivity to the automotive, industrial and truck markets. Reduced cycle-times, efficient and powerful software, and a robust compound handling system are some of the features that make this the lapper of choice around the world. |
|
Fom INDUSTRIE Product Development department can create complete cutting and machining lines based on the customers’ specific technical needs and highly customized on their exclusive production requirements. The latest technology is employed to produce complete automated implants. FOM automated implants have numerous applications in many different areas including transport, urban architecture, building and in the production of windows and doors.
The standard configuration of the cutting and working line is an automatic system made of 5 different working units. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| Thermtrol’s Thermal Cutoffs, also known as One Shot Thermal Fuses, inexpensively open a circuit when a predetermined set temperature is reached. Cutoffs covering a temperature range of 66C to 240C are stocked. Available in both radial or axial lead configurations, Thermal Cutoffs have current ratings from 1/2Amp to 15Amps and are UL, VDE, CSA agency rated for 50VDC, 120VAC, and 250VAC circuits. The large in-stock inventory and infinite customization options permit quick turn-around of drop-in devices. Thermtrol Corporation…Your Partner in Thermal Protection! |
|
| The portable rescue outfit is the perfect equipment for fire departments, search and rescue, military use and other rescue applications. It is light and portable, safe and easy to use. |
|
| The Hob-o is a lightweight hole borer, beveler and welder. It is a portable machine that is quickly centered on the workpiece – all you need is a single center – punch mark. Holes can be cut from 1”-8” (25mm-200mm) inside diam. and from 14.5”-48” (368mm-1220mm) outside diameter. |
|
|
|
see the results for the following category
