|
|
Axxair develops and produces in-line orbital welding machines for tubes. SATO-115 and 170 allow to make weldings for diameters from 12 to 170 mm and thicknesses from 1 to 3 mm (from 1 to 8 mm with bevelling).
SATO115: from ø 12 to 115 mm
SATO170: from ø 25,4 to 170 mm
|
|
Faults in welding tongs or incorrect process parameters in welding can result in production line waste or defective parts. Checking the electrode force periodically permits spark malfunctions to be detected at an early stage so that repairs can be carried out in good time.
The new Type 9833A test sensor allows precise and reliable measurements to be carried out with minimal electrode gaps. The built-in charge amplifier simplifies the task of mounting and helps to ensure the reliability required by the automobile industry.
|
|
|
Heron transgun---hanging spot welding machine, ZDN-025/035/040/050-005A-0001, the transformer is powerfull and pack design, we have X type and C type gun with different arm style, apply to the automotive car body weld and the other steel weld field
|
|
Features:
-Superior Low Energy Control for Micro Welding
-Ultra Fast Closed Loop Control
-Single Phase Power Supply
-Three Feedback Modes for DC Welders
-Graphical Display and Intuitive DC Welder Monitoring
The UB25 linear DC welder provides unsurpassed levels of control for micro-miniature resistance welding. This DC welder power supply should be used for smaller applications where closed-loop feedback control and fast response times are required. Safety critical applications such as those found in the medical and automotive markets will benefit from UB25’s precision low energy control.
|
|
Low Power Linear DC Welder with Built-in Monitor - UB25
Features:
- Superior Low Energy Control for Micro Welding
- Ultra Fast Closed Loop Control
- Single Phase Power Supply
- Three Feedback Modes for DC Welders
- Graphical Display and Intuitive DC Welder Monitorin
The UB25 linear DC welders (successor to the Unibond II) provide unsurpassed levels of control for micro-miniature resistance welding. These DC welder power supplies should be used for smaller applications where closed-loop feedback control and fast response times are required. Safety critical applications such as those found in the medical and automotive markets will benefit from UB25’s precision low energy control.
|
|
The quality of spot welding depends on the force applied by the electrodes as well as on the intensity of the welding current. Within such a control program, the measurement of the force applied by the electrodes is extremely important for ensuring constant production.
That is why we have developed this equipment to measure the closing force of the grips that may be used during the final stage or during periodic maintenance. The end-pieces are interchangeable and can be used to measure force with various shapes of electrodes, the minimum closing dimension being 0.12 in.
This new instrument leverages the robustness, quality and precision of the Centor instrument family, which are specially designed for mobile use in a production workshop.
|
|
|
|
|
|
Testweld™ Hand Held Electronic Force Gauge
An ergonomically designed hand held force gauge.
ADVANTAGES
User comfort "'Ergonomically" designed - for ease of use
One piece unit
Very high accuracy
Swivel head allows access to difficult to reach positions
As with all welding procedures, it is important to eliminate as many variables as possible in order to achieve optimum welding consistently over long periods.
Electrode force is one of the critical parameters in obtaining repeatable, reliable resistance spot welds.
Force can vary because of variable factory air pressure, water in the air lines causing air cylinders to deteriorate and loss of air pressure due to worn seals.
This self contained instrument uses a cell with a force sensor to provide accurate digital read out for auditing weld electrode forces.
Accuracy of this instrument is better than 0.2% and can be switched to read 0-2000 kg, 0-20.00 kN or 0-4400lbs.
In cases of difficult access the head of the swivel head gauge can be swiveled at least ±72º up or down and rotates at least ±90º. Once the desired position is reached it can be fixed by a simple hand tightened knob. A 90 mm long handle is provided for optional use with 2 mountain positions either in-line or at 90º.
A support wrist strap is attached to the gauge so that in the event that it is forced out of the operators hand by misaligned electrodes, it need not fall to the floor and be damaged.
|
|
Smith torch handles are available in three capacities to match job
requirements - Heavy, Medium, and Standard Duty. Torches have
silver brazed joints to provide overall strength and rigidity for safe
performance under rugged conditions. Torch handles are individually
tested to maintain the Smith reputation for quality and dependable
performance. And all standard Smith torches are covered by our
exclusive LIFETIME Warranty & Service Agreement.
|
|
IF - IntelliFlow Water Saver
IntelliFlow is designed to monitor the water coolant circuit in a resistance welding application. This computer controlled product can detect "cap off" conditions, display the flow rate, and display the water temperature.
- Detect and shut off water when the cap comes off
- Monitor and display coolant flow rate
- Monitor and display coolant temperature
- Monitors both supply and return coolant circuit
|
|
The Wire Booster assists the wire feeding between the pail pack and the wire-feeding unit of a robot welding system or a manual power source.The driving rollers of the Wire Booster are separated from the running motor through a magnetic clutch. The wire is fed by the magnetic clutch, as soon as the main drive of the robot employs force on the wire. Through this functional principle the Wire Booster does not necessarily have to be connected or synchronised with the main drive.Wire feeding problems can now be solved fast and without any unnecessary installation.
For detailed information please visit our homepage.
|
|
|
in order to obtain the best result when braze welding with weld material, sinergo has developed digital-control tools wich can automatically apply soft or silver solder. These devices allow you to shorten working time, assuring always a high, checkable and repeatable quality.
|
|
|
The Bug-gy-vert is a portable battery powered 4-wheel drive welding carriage with or without torch oscillation. Strong permanent magnets hold the machine on the workpiece, allowing it to travel on vertical or oblique work surfaces. Guide wheels on the Bug-gy-vert automatically track the torch in the fillet joint.
|
|
|
Smooth wire feed is critical to many welding applications. ESAB meets the need with ready-to-weld feeder packages featuring the latest technology for easy functionality and dependable operation.
|
|
The UNI-BUG III will make continuous or intermittent stitch welds. The machine will mount and run directly on the work piece. Each carriage is designed to fit on a specific steel profile.
The UNI-BUG III features stitch welding which is programmable by distance. If you require stitch welding simply set the selector switch to the intermittent weld setting and program the length of weld, skip and required delay for pre-flow and burn back.
|
|
Dual Guard(TM), Heavy Duty Cutting, Welding, and Heating Outfits
Dual Guard(TM), Heavy Duty Cutting, Welding, and Heating Toolbox Outfits
Dual Guard(TM), Heavy Duty Hand Cutting Torch Outfits
Dual Guard(TM), Medium Duty
Tough Cut(TM), Medium Duty
Tag-A-Long(TM), Portable
Versa-Torch®, HVAC/R
Quickbraze®, HVAC/R
Versa-Torch® Standard Tip Selections
Versa-Torch®/Quickbraze® Tip Selections
Handi-Heet®, Soldering & Brazing
Silver Smith(TM), Soldering & Brazing
The Little Torch®, Jewelry/Hobby
The Little Torch®, Jewelry/Hobby Caddy Kits
The Little Torch®, Jewelry/Hobby Tips and Technical Information
|
|
| ... products without technical information |
| |
|
|
|
|
FEATURES
LIFETIME Guarantee:
HFT offer a lifetime guarantee on the MOTOR of the TEG-3
Repeatable points every time:
The use of the 'TEG - 3 Tungsten Electrode Grinder' will give exactly the same tungsten points every time, enabling consistent repeatable arc performance and welding results.
Axial grinding:
By grinding the points longitudinally, the 'TEG - 3 Tungsten Electrode Grinder' eliminates arc flicker or wander.
Sizes:
Sizes from 1.6mm to 4mm can be ground as standard. Any other sizes can be catered for on request.
The TEG-3 Grinder is so powerful that it will grind tungsten electrodes up to 6 mm diameter, without stalling or burning out the motor. Remember, our lifetime guarantee and it has no limits. With the aid of a special collet accessory, short tungsten electrode lengths can be held, thus increasing the life of each electrode.
Low cost:
The TEG-3 Tungsten Electrode Grinder, has been designed and manufactured specifically for grinding Tungsten Welding Electrodes up to 6 mm diameter.
Prolonged tungsten life:
A tungsten electrode tip ground with the TEG-3 machine, will have a much greater life than a tip that has be hand ground on a workshop wheel or belt machine.
Arc Stability
Tungsten Electrode Tips ground with the TEG-3 Grinder, will be smooth and free from ridges, thus preventing erratic arc behaviour, arc flickering and arc instability.
|
|
|
|