|
|
ADVANTAGES:
• Robot checking of Electrode Force
• No need to stop robot cells for force checking
• Very fast payback
• Alerts operators to immediate faults & variations
• Can eliminate scrap due to weld deterioration
• Reduces equipment damage and wear
• Keeps force within preset limits
• Gives early warning of equipment deterioration
• Continuous robot operation via go/no go signals
DESCRIPTION - KR1000:
Stand alone analogue output force sensor. Supplied for direct plug and play replacement to commonly existing units.
The target pads remain spatially the same. Robot reprogramming for test position is not required.
The monitor is preset to Zero on no load but can be simply adjusted by the user if required.
The innovative design of the KR1000 force head makes it far less susceptible to errors induced by electrodes not being perpendicular to the target pads.
Exacting construction standards guarantee this instrument is of greater accuracy than other monitors of this kind.
Multiple testing during construction further assist in achieving the superiority that we have set out to achieve.
When coupled to its onboard electronics package the sensor is preset for zero load & calibrated
to a known (NPL) standard.
The KR1000 is robust, durable, reliable, and accurate. KR1000’s have been installed on Car Manufacturing lines since 2005 and have been in constant use without failures. |
|
MOTOMAN offers the widest range of robotic products with the number of controlled axes ranging from 4 to 13, including application dedicated robots for welding, palletising, handling, painting and clean room applications, with payloads ranging from 3 to 600 kg.
MOTOMAN installs turnkey systems and customised manufacturing solutions with the highest level of quality.
All manipulators/robots are fully electrical controlled by servo power.
The latest control system is capable of synchronised motion & control of up to four robots or 36 axes in total.
MOTOMAN also offers service, maintenance and training.
MOTOMAN, the robotic division of Yaskawa Electric Corporation, has its European headquarters in Kalmar, Sweden and Allershausen, Germany.
Interested in knowing more? Please contact us!
|
|
MOTOMAN offers the widest range of robotic products with the number of controlled axes ranging from 4 to 13, including application dedicated robots for welding, palletising, handling, painting and clean room applications, with payloads ranging from 3 to 600 kg.
MOTOMAN installs turnkey systems and customised manufacturing solutions with the highest level of quality.
All manipulators/robots are fully electrical controlled by servo power.
The latest control system is capable of synchronised motion & control of up to four robots or 36 axes in total.
MOTOMAN also offers service, maintenance and training.
MOTOMAN, the robotic division of Yaskawa Electric Corporation, has its European headquarters in Kalmar, Sweden and Allershausen, Germany.
Interested in knowing more? Please contact us!
|
|
Smith torch handles are available in three capacities to match job
requirements - Heavy, Medium, and Standard Duty. Torches have
silver brazed joints to provide overall strength and rigidity for safe
performance under rugged conditions. Torch handles are individually
tested to maintain the Smith reputation for quality and dependable
performance. And all standard Smith torches are covered by our
exclusive LIFETIME Warranty & Service Agreement. |
|
| Heron transgun---hanging spot welding machine, ZDN-025/035/040/050-005A-0001, the transformer is powerfull and pack design, we have X type and C type gun with different arm style, apply to the automotive car body weld and the other steel weld field |
|
The Wire Booster assists the wire feeding between the pail pack and the wire-feeding unit of a robot welding system or a manual power source.The driving rollers of the Wire Booster are separated from the running motor through a magnetic clutch. The wire is fed by the magnetic clutch, as soon as the main drive of the robot employs force on the wire. Through this functional principle the Wire Booster does not necessarily have to be connected or synchronised with the main drive.Wire feeding problems can now be solved fast and without any unnecessary installation.
For detailed information please visit our homepage. |
|
IntelliFlow IV is an integral water saver with flow monitoring and leak detection capabilities for use in Automotive Robotic Welding applications.
The IntelliFlow detects flow TO and FROM the robot cell. The unit also has a second monitoring process so that external redundant flow sensors
can be eliminated and a water temperature sensor. IntelliFlow has been a successful product which is easy to use while providing the benefits of a
product which can reliably detect ‘cap off’ and low flow conditions on automotive welding robots. A single IntelliFlow has been able to successfully monitor as many as 20 welding guns and has been well received by customers. These sensors have a redundant circuit that can monitor the actual water flow even when IntelliFlow is in bypass. During normal operation the supply and return flow rates should be the same and the FLOW OK message should be displayed. A micro processor constantly compares the supply and return flow rates and reports a fault if these flow rates are not equal (or within the user programmed tolerance). Additionally, the user can program a low flow rate value to create a fault when insufficient water flow is detected. A precision sensor monitors water temperature and displays it in real time. A fault signal will be sent if water temperature becomes over your desired threshold. IntelliFlow is DeviceNet capable as an option. |
|
| ... products without technical information |
| |
| The very different requirements created by the various welding techniques mean that specific products have to be specially developed. The industrial fabrics we use have specific coatings that leave the cover flexible but resist spatter and welding projections. Their para-aramid base has excellent mechanical resistance. Whatever the technique you use: arc welding, spot welding, laser welding... ASP has the perfect cover specially adapted to your exact situation. |
|
Panasonic G2 Robot Controller
64-bit RISC processors based controller with exclusive Windows® CE-based teach pendant provides a user-friendly interface which enhances productivity. Digital Interface with Panasonic digital power source makes it possible to adjust all parameters through the teaching pendant. |
|
ADVANTAGES:
• Robot checking of Electrode Force
• No need to stop robot cells for force checking
• Very fast payback
• Alerts operators to immediate faults & variations
• Can eliminate scrap due to weld deterioration
• Reduces equipment damage and wear
• Keeps force within preset limits
• Gives early warning of equipment deterioration
• Continuous robot operation via go/no go signals
DESCRIPTION - KR1000:
Stand alone analogue output force sensor. Supplied for direct plug and play replacement to commonly existing units.
The target pads remain spatially the same. Robot reprogramming for test position is not required.
The monitor is preset to Zero on no load but can be simply adjusted by the user if required.
The innovative design of the KR1000 force head makes it far less susceptible to errors induced by electrodes not being perpendicular to the target pads.
Exacting construction standards guarantee this instrument is of greater accuracy than other monitors of this kind.
Multiple testing during construction further assist in achieving the superiority that we have set out to achieve.
When coupled to its onboard electronics package the sensor is preset for zero load & calibrated
to a known (NPL) standard.
The KR1000 is robust, durable, reliable, and accurate. KR1000’s have been installed on Car Manufacturing lines since 2005 and have been in constant use without failures. |
|
|
|
see the results for the following category
