|
|
|
Welding fume filter systems for almost every type of industrial fume extraction problem. Portable, stationary or/and as central system.
|
|
The Filter-Master is a mobile mechanical filter designed and ideally suited for use at various welding workplaces and conditions. Built of rigid sheet metal construction and incorporating anti corrosive powder coating; the Filter-Master is designed for every day use. Four heavy duty rubber castors allow ease of movement within the factory and the 3.0 m extraction arm into any desired position. The Filter-Master is the ideal solution to a wide range of extraction problems.
The mechanical filter unit is equipped with a filter insert (filter efficiency > 99.9 %), filter monitor, motor protection with switch and starter, 5.0 m mains cable with plug and complete exhaust arm with hood.
Technical data:
fan performance: 2,200 m3/h
extraction performance at the hood: 1,200 m3/h
motor power: 1.1 kW
voltage: 3 x 400 V / 50 Hz
noise level: 68 dB (A)
filter efficiency: > 99.9 %
weight (without extraction arm): 80 kg
dimensions: 655 x 655 x 1,020 mm
Filter-Master is available as:
Filter-Master with 1 exhaust arm, 2,0 m, Ø 150 mm
Filter-Master with 1 exhaust arm, 3,0 m, Ø 150 mm
Filter-Master with 1 exhaust arm, 4,0 m, Ø 150 mm
|
|
Health protection during welding processes
Welding fumes are classified as potential hazardous substance. The welding dusts and fumes are respriable. Cadmium and nickel are known to cause cancer. Therefore welding fumes have to be captured completely at the source and disposed riskless.
The extraction and filtration units of ULT AG as well as the range of accessories and extraction arms capture the hazardous substances at source and guarantee a high-efficient filtration.
|
|
Reversit is an exclusive and innovative system of suction and filtration of dusts as a result of professional applications. Designed and realized with the most modern technologies available, it appear to be the only product in his kind for the special structural configuration that allows it to reach very high efficiency of filtration and to mantain them unchanged in time, observing the most strict environmental protection rules.
The modular structure that make Reversit different, starting from three basis structures, in addition to garantee reduced overall dimensions allows a full personalisation of the units depending on the pollutant and on the system demands.
All the versions are planned to be created and certified in accordance with Atex directives.
|
|
Welding smoke extraction and filter unit including 2 filter cartridges with PTFE membrane (filter effeciency > 99.9%), automatic filter purification by means of rotating
nozzles, compressed air reservoir, connection for external compressed air supply, differential pressure controlled automatic purification, ventilator, dust collecting
container, motor protection switch. The unit includes 1 or 2 exhaust arms and exhaust hood with damper.
Description
ventilator: 3,000 m3/h, motor: 1.5 kW · 3 x 400 V / 50 Hz
cartridge filter unit with 1 exhaust arm, 2.0 m, Ø 150 mm, 3.0 m, Ø 150 mm, 4.0 m, Ø 150 mm
cartridge filter unit with 2 exhaust arms, 2.0 m, Ø 150 mm, 3.0 m, Ø 150 mm, 4.0 m, Ø 150 mm
additional cost for activated charcoal filter
Cartridge filter unit, mobile with rigid metal tube exhaust arm is available on request
All units are available as stationary Cartridge filter units
High vacuum cartridge filter unit, mobile
suction performance: 500 m3/h, max. Vacuum 20,000 Pa, motor: 4.4 kW · 3 x 400 V / 50 Hz
|
|
Mobile cartridge filter with fully-automatic, dust-related deduster via the POWER SPRAY SYSTEM. Comes equipped with a separator and two durable large-surface filter cartridges.
The controls include a post-cleaning function during idle ventilation time. The unit comes supplied with a filter monitor, sealing face lifter, hour-meter, direction display, cable reel and castors with brakes.
Includes cable bearer, 5 m cable and plug.
|
|
|
An efficient unit with a high volumetric air flow such as smallest noise emission for working places in calm environment. Available in MINI- and MAXI-execution, whereby the AIRFILTER MAXI has double suction power and double filtering surface opposite the AIRFILTER MINI. Thus the AIRFILTER MAXI is particularly suitable for the multi-shift operation. The volume of both units corresponds in approximately to that of a personnel computer.
|
|
Hazardous materials in the form of dust, floating particles, gases and fumes are often unavoidable in production processes. According to national regulations of air purification at the workplace they have to be removed from the air. Extraction devices of the ULT AG are particularly designed for these tasks and thus, harm to employees, products and machines is safely prevented.
The recirculation ventilation helps to reduce energy costs.
|
|
Micro Air manufactures a complete line of portable collectors. from the M2150 media collector, for light duty or small volume applications to the MC1500 cartridge collector for heavy duty production.
Cartridge units utilize self-cleaning, high efficiency cartridge filters, that reduce filter replacement costs, as the filter elements are continually cleaned by compressed air. All Micro Air cartridge collectors utilize Micro Air's exclusive Roto-Pulse cleaning system. Because this cleaning system cleans the entire surface of the cartridge, it has proven to be far more effective, than the traditional reverse-jet system, thus extending filter life. Cartridge collectors can also be equipped with HEPA filters or Charcoal Modules.
|
|
|
The Euromate SCS filter system is excellent for large-scale industrial use. It is developed especially for removing and filtering harmful substances and vapours released during welding, cutting and grinding processes in the metal industry. The SCS has a filter surface of 150 m2 and is equipped with a self-cleaning filter system for ultra- effective cleaning. Several SCS systems can be easily linked due to the modular construction method.
|
|
The Euromate Diluter System provides for continuous dilution and filtration of the contaminated air, thereby reducing the background concentration of welding fumes. The EDS is plug & play, there is no need for ducting, and it is suitable for virtually any work situation.
Euromate Diluter System (EDS) – the smart solution:
- Plug & play solution in general filtration. Cost saving because there is no need for ducting.
- Continuous filtration of the polluted air as a result of which the background concentration of welding fumes is decreased.
- Easy to install and suitable for virtually any work situation.
- Flexibly adaptable to any work situation
|
|
PHV - PORTABLE welding smoke withdrawal system
- Clean air for a safe and healthy work surrounding field
The PHV von PlymoVent is a user friendly, portable and mobile plant for efficient welding smoke exhaust at the source. Compactly and easily, simply in that. Above all suitably for light and normal weldings on the spot, in small areas or in difficult places. The PHV scolded by your mechanism automatically, as soon as one welds. It has 2 engines and two performance levels. The main filters has a surface of 12m ², which provides for long intervals without filter changes. The solitary dust can be disposed of together with the filter dust free. The welding smoke arrives to an aluminum prescreener in the main filters "Dura H®" over a metal before separator and. Subsequently, by means of a "EHEPA" filter a separator degree is reached of 99,9%. Between main and Nachfilter additionally an activated charcoal filter can be used.
|
|
|
Filter systems especially made for the laser industry. Suction systems for laser jobs with i.e.metal, wood, plexiglas and gum (cutting, welding, marking etc.)
|
|
|
An efficient unit with a high volumetric air flow such as smallest noise emission for working places in calm environment. Available in MINI- and MAXI-execution, whereby the AIRFILTER MAXI has double suction power and double filtering surface opposite the AIRFILTER MINI. Thus the AIRFILTER MAXI is particularly suitable for the multi-shift operation. The volume of both units corresponds in approximately to that of a personnel computer.
|
|
Extraction and filter unit with fan, automatic filter cleaning depending on loading of dust on filters, Siemens-Simatic-unit control and PTFE membrane filters.
KEMPER extraction systems are suitable for connection to flame cutting tables with laser, plasma or autogen cutting systems. These extraction systems are also suitable for extraction of welding smoke at several work stations by means of stationary units.
Filter classification M and L with filter efficiency of 99,9 % (BIA-classification U, S, G, C).
|
|
|
Welding fume filter systems for almost every type of industrial fume extraction problem. Portable, stationary or/and as central system
|
|
|
Filter systems especially made for the laser industry. Suction systems for laser jobs with i.e.metal, wood, plexiglas and gum (cutting, welding, marking etc.)
|
|
|
Welding fume filter systems for almost every type of industrial fume extraction problem. Portable, stationary or/and as central system.
|
|
|
Control over polluting emissions into the atmosphere is essential for an industry that nowadays does not only have production but also respect to the environment and sustainable development as its references.
|
|
| ... products without technical information |
| |
|
|