|
|
|
To achieve maximum welding rate and minimal labor cost, 6100 Automatic Welding Systems integrate a combination of standard Weldlogic products to provide a complete package. Specifically designed for precision automatic welding, 6100 systems allow circumferential, longitudinal and spot welds to be easily made with a minimum of operator skill. All components are fully intergrated to create a complete "ready-to-go" automatic welding station.
|
|
|
Portable, compact welding transformers VAREX are used for welding with coated electrod of rutile consistence. Area of usage is wide, but they are specialy intended for maintenance and repair welding. VAREX machines are irreplaceable in every workshop.
|
|
|
Welding inverters Varin are portable welding machine which are using direct current. Mostly used for welding construction and stainless steel by using rutile, basic and cellulose electrode (only VARIN 2000 CEL). They are also suitable for repairs, building yards and workshops.
|
|
|
Machines for SAW welding in combination with Kjellberg Finsterwalde welding power units provide a wide range of technological solutions for effective use in industrial welding production.
|
|
|
|
|
|
Saf-Fro proposes a new range of welding equipments to the coated electrode: PRESTO PFC. Inverters arc with D.C. current, these stations are designed to be used under all the conditions: more current with most extreme. Offering a great robustness and a ratio duty raised, they make it possible to weld until 180A onto a simple catch domesticates while reducing electricity consumption. Range PRESTO PFC respects the limitation of the harmonics (standard IN 61000-3-12).
Performances
- Intensity of welding up to 180 has for model PRESTO 180 PFC
- Compatibility with the generators thanks to controller PFC
- Long primary education cables (70 m - section of 2,5 mm2)
- Starting, Hot Start, Anti-joining Excel
- Welding of all types of electrodes (except cellulose)
A reduced consumption
- Functions on a catch domesticates (fusible of 16 A)
- All the models have a standard catch
A better ergonomics
- Reduction of the noise: "intelligent ventilator"
- Arch... to facilitate lifting
- Arch... to roll up the cables of welding
- Reduced Weight: 6,6 kg only
- A compact design
|
|
K1297 AC/DC 225/125
The AC/DC 225/125 is the deluxe version of the world renowned AC-225 arc welder. It uses the same traditional design of the AC-225, but adds the smoother, more stable DC welding arc. Ideal for farm, shop, and home use where improved arc welding performance is desired.
The AC/DC 225/125 is an arc welding power source with an AC welding output range of 40-225 amps and a DC welding output range of 30-125 amps. It is an extremely useful stick welding power source for maintenance repair, fabrication, construction, erecting and hardfacing applications. Also for cutting and piercing holes in steel.
|
|
Quick. Controlled. Quality.
With full digital technology the GB2-350 offers improved stable arc starts and reduced spatter generation. More uniformed balls at the end of the welding wire make for highly repeatable welds and quick, more predictable starts every time.
Digital technology also means bettering the wire feeder. Wire feed speed can be maintained even if input voltage fluctuates.
Additionally, the GB2 delivers quality welds across several material types. It excels in maintaining stable arc control at low voltages - excellent for your thin gauge welding applications. And high performed welding data means improved stainless steel applications as well.
|
|
|
|
|
|
Genesis 503 PME
These are inverter power sources purposely designed for exceptional quality continuous wire welding (MIG/MAG, PULSED MIG) and electrode welding (MMA); TIG welding with contact ignition is also possible.
The control panel is easy to use and 52 different synergic curves are available to the operator for MIG/MAG and pulsed MIG welding of all the most common materials.
A duty cycle tested at 40° C ensures interruption free operation to 100% at 25° C.
performance in pulsed arc welding. They are ideal for use even with thin aluminium and stainless steel sheet, with which they give a weld quality similar to that achievable with TIG welding.
The WF104 separate wire feed unit weighs only 19 kg (without wire reel) and can be positioned above the power source on a pin, which permits 360° rotation, or at a distance near the work place by means of a connection cable bundle up to 10 m long; the microprocessor, the Encoder and a sturdy 4 roller gearmotor ensure maximum precision in welding wire delivery speed.
At switch-off, the last welding condition is stored, making it easier to re-start work after interruptions.
|
|
|
|
|
|
Miller's Sub Arc DC Series are three-phase, CC/CV DC power sources designed to provide a superior arc for the SAW welding process, as well as air carbon arc gouging plus the endurance to handle demanding industrial applications.
Miller's Sub Arc DC Series machines are three phase power sources offering constant current and constant voltage in the DC mode. They provide a superior arc for the submerged arc welding process. The time tested and trusted reliability of the Sub Arc DC series equipment provides the endurance to handle demanding industrial applications such as air carbon arc gouging.
DC Multiprocess capability, versatility and outstanding arc performance in CV and CC (SAW, Stick, ACA).
Line voltage compensation keeps welding parameters constant even when input voltages change ±10%. Eliminates need to change welding parameters throughout the day.
Unique Fan-On-Demand™ cooling system operates only when needed. Reduces contaminants drawn into the machine and excess noise in work areas.
15 amp 115 VAC duplex receptacle allows operators the flexibility to run grinders, drills, coolers, etc. from power source without the need for additional 115 VAC power in weld area.
Power efficient for exceptional value and return on your investment.
Remote on/off capabilities allow operator to turn power source on or off from a distance.
Remote control capability allows operators fine tuning capability at an extended distance.
Hot Start™ makes it easier to start difficult-to-start Stick electrodes. Used for arc starting only.
Enclosed circuit boards provide additional protection from contaminants resulting in longer service life.
Thermal Overload Protection protects internal components. It automatically shuts down the unit if duty cycle is exceeded or air flow and cooling are restricted.
|
|
* Easily programmed
* Weld parameter monitoring
* Automatic self-compensation
* PC data interchange
* 63 weld schedules per outlet
* Closed loop control and feedback
* Alert and fault output displays
* Self diagnostics
* Robotic, fixed automation and manual systems available
|
|
|
MMAW, SAW and MIG/MAG welding units for welding up to 1400 A DC as well as Kjellberg Finsterwalde welding automats are suitable for manual, mechanised and semi-automated welding processes.
|
|
|
FEATURES: Plug in solid state circuitry. Continuous current control from 250 to 900 amps. Continuous time control from .05 to .7 seconds. Built in chuck saver. System comes complete with 8 meters earth cable and clamp, 15 meters weld and control cable and stud welding gun with legs and foot piece.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
