|
|
Splicer duty cycle, depending on application
Nelweld 4000
ø 22 mm - 4 per min.
ø 5 mm - unlimited
Nelweld 5000
ø 25 mm - 5 per min.
ø 8 mm - unlimited
Nelweld 6000
ø 25 mm - 10 per min.
ø 10 mm - unlimited |
|
With the KSE 100 NELSON stud splicer
technology has once again proven how
practical applications for welding systems
can be developed at our Gevelsberg
facility. The new servo-electric technology
offers enormous advantages in many
areas of application. For example the
servo-electric operated welding head
ensures that all movement during the
welding process is carried out in a
controlled manner even in especially
demanding welding situations. As usual
all components in the KSE 100 system are
of modular design and fully compatible
with one another. |
|
| Studhorse 1200 stud welders require only 30A time-delay fuses and are designed for maximum portability, proven reliability and harsh environments. Digital Start/Stop replaces a mechanical contactor for increased reliability. These 1200 Amp Drawn Arc machines weld full-base studs and professional fasteners from 1/4 to 5/8 inches using time-proven SCR Industrial inverter circuitry for high-power efficiency and energy savings. Features include Step-Less .05 to 1-Second Time and Power Control; Short Circuit Protection; Corrosion Protection with a 5-year guarantee against corrosion-related failures; Pilot Current to help on dirty surfaces; Kickstart Circuit to ensure fast pull-up; Afterburn Circuit to enhance weld quality for small diameter studs; Built-In Industrial circuit breaker with 5-zones of thermal protection to protect components; and Individual Controls for Current and Time to reduce mode change time and errrors. At 1000 Amps, Duty Cycle is 1 stud every 10 seconds. The Sturdy Fiberglass- reinforced case protects machine when transported, dragged or dropped. Available in analog or digital models, complete systems are available with professional gun, cables and manual. |
|
| Studhorse 1200 stud welders require only 30A time-delay fuses and are designed for maximum portability, proven reliability and harsh environments. Digital Start/Stop replaces a mechanical contactor for increased reliability. These 1200 Amp Drawn Arc machines weld full-base studs and professional fasteners from 1/4 to 5/8 inches using time-proven SCR Industrial inverter circuitry for high-power efficiency and energy savings. Features include Step-Less .05 to 1-Second Time and Power Control; Short Circuit Protection; Corrosion Protection with a 5-year guarantee against corrosion-related failures; Pilot Current to help on dirty surfaces; Kickstart Circuit to ensure fast pull-up; Afterburn Circuit to enhance weld quality for small diameter studs; Built-In Industrial circuit breaker with 5-zones of thermal protection to protect components; and Individual Controls for Current and Time to reduce mode change time and errrors. At 1000 Amps, Duty Cycle is 1 stud every 10 seconds. The Sturdy Fiberglass- reinforced case protects machine when transported, dragged or dropped. Available in analog or digital models, complete systems are available with professional gun, cables and manual. |
|
The SGC 66 Percussion is a new professional generator which can weld is in
contact mode is in percussion mode.
It is the most compact generator and lightest in its category.
Managed by Microprocessor, it is equipped with a meter
of recording (counting of the number of weldings and time counting).
It is the ideal tool for all the weldings on stainless steel,
aluminum, brass, coppered mild steel, in the diameters m2 in M8, and
it finds its place in very many applications:
aeronautics, fine sheet-iron works, electric household appliances, articles domestic,
automotive engineering, cycles. |
|
Metric and Imperial Ball screw jacks designs in translating and rotating screw formats in upright or inverted types are available in capacities up to 500kN ( 50 Ton). 2 gear ratios and 2 screw leads as standard, Options include Pre-loaded ball nut, Anti-rotation (keyed), 6 mounting options including trunnion and double clevis.
The Metric Ball Manufacturer of screw jacks have the extra advantage of an integral safety system as standard. |
|
Ball screw jack.
Stainless Steel execution available.
Capacities from 1 Ton to 30 Ton.
Stroke on request.
Body with Base or Pivoting feature.
Upright or Inverted Screw.
Translating or Rotating Screw.
Motor applications. |
|
Joyce/Dayton - Established 1873
Joyce Ball screw jacks feature a ball nut with integral ball bearings that recirculate along the surface of the manufacturer of ball screw. The significantly reduced friction between the ball nut and screw results in greater efficiency, with up to 2/3 less input torque required to move the load than a similarly rated machine screw jack.
Compared to Machine Screw jacks, Joyce Ball Screw Jacks
- Require less motor horsepower
- Allow higher travel speed
- Provide an extended duty cycle
Joyce Ball Screw Jacks are available in translating screw or rotating screw (keyed for traveling nut) designs. Translating screws are available with threaded, load pad, clevis or plain ends. Options include limit switches manufacturers, professional encoders, geared potentiometers, direct drive and reducer mounts, and protective professional boots. Joyce Ball Screw Jacks are ideal for single or multiple jack systems.
Unlike Machine Screw Jacks, Ball Screw Jacks are not self-locking. Because they will lower under load, a braking motor or other external braking mechanism is required.
|
|
| Roller screw jack provide higher performance compared to ball screw jacks. Ideally suited to applications where a high dynamic load, high accuracy, high speed and a long life are required. |
|
| ... products without technical information |
| |
| Kinney SDV Dry Screw suppliers of vacuum pumps operate without any sealing liquid in the pumping chamber. Without metal-to-metal contact inside the pumping chamber, wear is greatly reduced. |
|
This unit is able to fulfil the highest requirements for a wide range of applications. By entering the load and output into your customer system, the air supply system automatically and directly adapts to the given requirements. The frequency-controlled drive unit offers a wide control range with optimised demand matching. In addition to energy savings and higher efficiency, this also results in lower maintenance requirements. The non-contact, oil-free screw unit ensures high air flows with low pulsation and lends itself to "master/slave" operation. Integrated accessories include a non-return cock, intake industrial filter, sound absorbers and ventilation/bleed system. An air blast industrial cooler is also available.
|
|
TWISTER VSB
Single-stage screw suppliers of vacuum pumps
- Dry running according to the screw principle
- Low running temperature due to the precision graduation of the screw pitch
- Easy to service
- Corrosion-resistant configuration by different coating versions
Range Technical Overview :
Capacity 80-500 m³/hr at 50 Hz and 100-650 m³/hr (59-383 cfm) at 60 Hz, Continuous vacuum upto 0.05 mbar (abs.) / 29.92 in.HgV
Possible Applications :
Process Technology |
|
KRAL pumps with magnetic coupling are hermetically tight, the pump station as well as the site itself stays clean. As magnetic couplings work without wear and maintenance-free, the life cycle costs are favourable comparative to conventional sealing systems.
Please consider that we are a manufacturer of high quality displacement pumps and flowmeters for liquids. The products (pumps with magnetic couplings, high pressure flowmeters and flowmeters – chemically resistant) mentioned on this portal are only part of our product range. Please find more detailed information on our website or directly from us. |
|
Housings, bead studs and Co. are as various in their geometry, appearance and construction as the ideas of the designers.
There are standard parts in every possible size, construction and material composition available for most applications. As one of the leading German specialist for linking elements, mbo Osswald always keeps a large number of ball studs and housings out of his product palette of more than 12,000 parts in stock. |
|
Features and Benefits:
Bolttech is known for solving the toughest bolting problems found in the industrial world today. These basic practices go into every design and manufacturing detail of our stud tensioning line of tools. We design our tensioners with quality, simplicity and versatility of the specific application and user in mind. Bolttech's Delta Series bolt suppliers tensioners maximize efficiency and minimize size for specific single stud size applications.
- Patented high pressure/low friction professional seals are designed to outlast the competition and provide accuracy within .5% with a calibrated pumping unit.
- Environmentally friendly, using water-filled tensioning systems.
- The direct axial load is applied to the bolt and inaccuracies created through friction are alleviated. |
|
In its standard range of hydraulic tensioners, SKF Equipements offers no less than 6 different types of tensioners with characteristics which are both different and complementary.
The product range includes multi- purpose, powerful, thin, compact and other types of tensioners, covering a wide range of bolt manufacturer dimensions from M8 to M160 (5/16” to 6”), and able to apply pre-tightening loads ranging from 50 kN to 8500 kN.
|
|
HYDRAULIC SUPPLIERS OF BOLT TENSIONING DEVICE
Output 155Kn to 4476Kn, Stroke up to 15mm, Suitable for Bolt Sizes M18 to M115 in various models
|
|
The RotaBolt® range provides you with either finger-tip, visual or remote measurement of tension throughout the life of the bolted joint. They surpass traditional tightening methods such as:
- Hydraulic Tensioners
- Flogging
- Torque Systems
which have severe control limitations and can result in unpredictable bolt tension and joint failure.
RotaBolts are setting new safety standards in a wide variety of sectors where joints are subject to fatigue, vibration, pressure containment and structural slippage.
|
|
| Over the years, Hydratight has developed many solutions for non-standard tensioner applications. A number are based around our existing reliable products, but we also have the ability through our experienced design engineering team to produce bespoke products to solve a wide range of tensioner based bolting applications. |
|
| ... products without technical information |
| |
Features:
- Portable, handheld units
- Battery operated
- High resolution display
- Temperature compensation
- Interchangeable transducers
- Windows software
- Built-in probe zero block allows easy exchange of transducers
- Regression analysis for custom material calibration
- Windows software to download measurements create reports, and upload test parameters
- Direct-to-printer reports |
|
| ... products without technical information |
| |
Profile Connectors specification
_Bolt Connector, Slot 8
_Bolt Connector, Slot 10
_Bolt Connector, Slot 10
_Central Connector, Steel
_Cover Cap for Central Connector, Nylon
_Angle Connector 40, Die-cast Zinc
_Angle Connector 40/80, Die-cast Zinc
_Self Tapping Screw, With Torque
_Connecting Screw, Steel
_Plate Connector, Die-cast Zinc
_Universal Connector, Die-cast Zinc
_Butt Fastening Universal Connector, Die-cast Zinc
_Milling connector profile 30, Steel
_Milling connector profile 40, Steel
_Milling connector profile 45, Steel
_Pin T-Slot Nut, Steel, Slot 8
_Screw Connector, Steel, Slot 5, 6, 8
_Connection Plate 40 x 80, Steel, Profile 40 and up
_Connection Plate 100, Steel |
|
BSS-90, 150, 240 STAINLESS STEEL SPRING LOADED BARREL BOLT
304 Stainless Steel
Stainless Screws included.
Several Sizes available.
Please visit our website for further information. |
|
|
