|
|
Pi 200 and Pi 250 are for quality welding operations in TIG AC/DC and MMA. You have never seen such a variety of readily accessible facilities for TIG weld-ing: increased programming, simple operation and user-friendly design, as well as inverter technology combined with innovative operation and communi-cation possibilities.
Mono-phase and three-phase
A high-performance mono-phase or three-phase Pi machine is always available and perfect for a wide range of TIG and MMA welding operations. Both the Pi 200 and the Pi 250 are available in three ersions, all of which have easy-to-use control panels:
Pi DC for MMA welding with simple TIG LIFTIG®.
Pi DC HP - TIG with pulse and Synergy Plus™ as standard features.
Three optional pulses:
Pi offers three optional pulse versions: traditional manual pulse, quick pulse, and Synergy Plus™ for DC welding which automatically adjusts all overarching pulse para-meters. Another advantage of Synergy Plus™ is that the traditional sound in pulse welding has been replac-ed by a sound that does not cause stress. Pi 200 HP and Pi 200 AC/DC, the two mono-phase machines, feature PFC (Power Factor Correction), a function that makes it possible to weld with up to 200 A if only 16 A mains fuses are available.
Controlled cleaning zone:
All Pi AC/DC machines - including the mono-phase version - are fitted with the D.O.C.® system,Miga-tronic's revolutionary dynamic oxide control. In
welding aluminium, D.O.C.® ensures a controlled cleaning zone along the weld, increases the welding speed by up to 30% and reduces the consumption of energy and tungsten electrodes correspondingly.
|
|
The YC-300BZ3 DC inverter TIG welding power source has been developed on Panasonic digital technology. It is 100% digital controlled and offers high quality welding.
Technical Data:
100% full digital control high performance welding
• Exact output parameters
• Sharp and stable arc start as low as 4 amp.
• Welding Method:
1. DC TIG, DC pulse TIG for mild and stainless steel as well as titanium 0.3 – 6 mm, copper and brass 0.5 – 3 mm
2. DC TIG arc spot for mild and stainless steel with 2 x 2 mm thickness
3. DC stick for diameter 2 – 6 mm
• Duty cycle: 300A / 40%
• Weight: 36 kg
• Digital interface with Panasonic robots
• Arc drive function for stick welding
• Dimensions: 510 x 380 x 410 mm (L x W x H)
• 400 V AC, 3 phases, 50 / 60 Hz
Digital display, LCD, jog dial
• Digital display for both programmed parameter and actual welding parameter
• Easy and logical parameter setting by LCD and jog dial
Quality control
• 99 memory programs
• Digital connection with the PC / network for production
management and quality control
Customer Benefits:
• Sharp and stable arc start
• Reliable quality for low maintenance and service cost
• Easy parameter setting by jog dial
|
|
Panasonic presents the full digital AC/DC-TIG power source
YC-300BP2 which was invented for AC-, DC- and Mix- TIG welding. The BP2 can be used until an AC-frequency up to 400Hz.
The BP2 is easy to operate even if several assigned functions are selected and it has a well arranged control panel. Up to 50 different welding conditions can be stored and operated.
|
|
Genesis 503 PME
These are inverter power sources purposely designed for exceptional quality continuous wire welding (MIG/MAG, PULSED MIG) and electrode welding (MMA); TIG welding with contact ignition is also possible.
The control panel is easy to use and 52 different synergic curves are available to the operator for MIG/MAG and pulsed MIG welding of all the most common materials.
A duty cycle tested at 40° C ensures interruption free operation to 100% at 25° C.
performance in pulsed arc welding. They are ideal for use even with thin aluminium and stainless steel sheet, with which they give a weld quality similar to that achievable with TIG welding.
The WF104 separate wire feed unit weighs only 19 kg (without wire reel) and can be positioned above the power source on a pin, which permits 360° rotation, or at a distance near the work place by means of a connection cable bundle up to 10 m long; the microprocessor, the Encoder and a sturdy 4 roller gearmotor ensure maximum precision in welding wire delivery speed.
At switch-off, the last welding condition is stored, making it easier to re-start work after interruptions.
|
|
| ... products without technical information |
| |
|
The perfect integration between motor and inverter, with a powerful and efficient algorithm in a robust IP66 casing. Features versatile control with a wide range of field buses and a practical and flexible interface. A product that marks an innovative response to the most rigid demands for application.
|
|
PR+MSF worm geared motors with pre-stage helical units.
Worm gear speed reducers type SF-MSF are a new generation of products developed by our company.
|
|
SITI ISV MOTO INVERTER combines the actual performance of mechanical variators with reliability and flexibility that are typical features of the electronic control.
With ISV MOTO INVERTER it is possible to adjust the system speed by operating locally, as it happens with the hand grip of a mechanical variator.
In order to carry out these adjustments, SITI ISV MOTO INVERTER is equipped with an integrated keyboard for an easy and direct configuration of the inverter.
A display allows to visualize conveniently the speed that was previously set and to check actual parameters.
Main features:
- It enables a remarkable cabling cost reduction, both labour and actual costs (due to cables not needing any shielding), as well as panel board costs, due to the smaller dimensions.
- No need of external filters.
- It is accordance with EC directives on the electromagnetic compatibility EMC, thanks to the absence of the external cables between motor and inverter and to the presence of an integrated filter that eliminates possible circuit transient.
- Inverter da kW 0.37 a 1.5
- Rated power output da kVA 0.8 a 2.9
- Rated current da A 1.1 a 3.7
- Motor power output da kW 0.37 a 1.5
- Input voltage V 380/440 (± 15%)
|
|
The switches of sources of automatic feeding and without cut aim to ensure the automatic passage of a renewable energy source (solar or wind) on source EDF and vice versa without
interruption of food for the user.
These systems are addressed to any site equipped with a means of production of renewable energy (solar panel or wind mill) which is not connected to network EDF.
Consequently, no administrative authorization is obligatory for their installation.
|
|
| ... products without technical information |
| |
... see all the products in the category
Batteries
|
|
|
see the results for the following category
