|
|
| The Uni-Slide stand-alone product line is a system concept with a linear product movement. The product is safely and accurately loaded, aligned and unloaded in the front position of the slide, and processed in the rear position. The linear slide is manual operated. |
|
Specifications:
- Welding head type RC 70 with horizontal welding axis
- Automatic feeding of the brazing quantity
- Four successive welding points |
|
The SGC 66 Percussion is a new generator which can weld is in
contact mode is in percussion mode.
It is the most compact generator and lightest in its category.
Managed by Microprocessor, it is equipped with a meter
of recording (counting of the number of weldings and time counting).
It is the ideal tool for all the weldings on stainless steel,
aluminum, brass, coppered mild steel, in the diameters m2 in M8, and
it finds its place in very many applications:
aeronautics, fine sheet-iron works, electric household appliances, articles domestic,
automotive engineering, cycles. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| The Girth Welder is a self-propelled welding system for field storage tank welding. It can reduce field storage tank welding time up to 40%. Weld defects are greatly reduced saving tank erection costs. This machine is available as dual or single sided. The Lincoln NA-3 control and welding head are fitted with wire feed rolls, nozzles, straighteners and 50 lbs (22.7 kg) wire reels. A flux recovery system is equipped with the machine for the recycling of flux. An adjustable frame allows for plates 6' (1.8m) to 10' (3m) tall. |
|
FEATURES
LIFETIME Guarantee:
HFT offer a lifetime guarantee on the MOTOR of the TEG-3
Repeatable points every time:
The use of the 'TEG - 3 Tungsten Electrode Grinder' will give exactly the same tungsten points every time, enabling consistent repeatable arc performance and welding results.
Axial grinding:
By grinding the points longitudinally, the 'TEG - 3 Tungsten Electrode Grinder' eliminates arc flicker or wander.
Sizes:
Sizes from 1.6mm to 4mm can be ground as standard. Any other sizes can be catered for on request.
The TEG-3 Grinder is so powerful that it will grind tungsten electrodes up to 6 mm diameter, without stalling or burning out the motor. Remember, our lifetime guarantee and it has no limits. With the aid of a special collet accessory, short tungsten electrode lengths can be held, thus increasing the life of each electrode.
Low cost:
The TEG-3 Tungsten Electrode Grinder, has been designed and manufactured specifically for grinding Tungsten Welding Electrodes up to 6 mm diameter.
Prolonged tungsten life:
A tungsten electrode tip ground with the TEG-3 machine, will have a much greater life than a tip that has be hand ground on a workshop wheel or belt machine.
Arc Stability
Tungsten Electrode Tips ground with the TEG-3 Grinder, will be smooth and free from ridges, thus preventing erratic arc behaviour, arc flickering and arc instability. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Powerflow™ fume extraction and filtration systems are specifically designed to be integrated with machine production processes that produce hazardous fumes and dust. Purex International engineers are available to advise on the correct combination of pre-filter, main filter and machine required for any specific process, including: -
Wave soldering
Reflow soldering
Etching, marking and cutting
Curing ovens
Powder handling and packaging
High volume chemical handling |
|
The Filter-Master is a mobile mechanical filter designed and ideally suited for use at various welding workplaces and conditions. Built of rigid sheet metal construction and incorporating anti corrosive powder coating; the Filter-Master is designed for every day use. Four heavy duty rubber castors allow ease of movement within the factory and the 3.0 m extraction arm into any desired position. The Filter-Master is the ideal solution to a wide range of extraction problems.
The mechanical filter unit is equipped with a filter insert (filter efficiency > 99.9 %), filter monitor, motor protection with switch and starter, 5.0 m mains cable with plug and complete exhaust arm with hood.
Technical data:
fan performance: 2,200 m3/h
extraction performance at the hood: 1,200 m3/h
motor power: 1.1 kW
voltage: 3 x 400 V / 50 Hz
noise level: 68 dB (A)
filter efficiency: > 99.9 %
weight (without extraction arm): 80 kg
dimensions: 655 x 655 x 1,020 mm
Filter-Master is available as:
Filter-Master with 1 exhaust arm, 2,0 m, Ø 150 mm
Filter-Master with 1 exhaust arm, 3,0 m, Ø 150 mm
Filter-Master with 1 exhaust arm, 4,0 m, Ø 150 mm
|
|
Health protection during welding processes
Welding fumes are classified as potential hazardous substance. The welding dusts and fumes are respriable. Cadmium and nickel are known to cause cancer. Therefore welding fumes have to be captured completely at the source and disposed riskless.
The extraction and filtration units of ULT AG as well as the range of accessories and extraction arms capture the hazardous substances at source and guarantee a high-efficient filtration. |
|
Welding smoke extraction and filter unit including 2 filter cartridges with PTFE membrane (filter effeciency > 99.9%), automatic filter purification by means of rotating
nozzles, compressed air reservoir, connection for external compressed air supply, differential pressure controlled automatic purification, ventilator, dust collecting
container, motor protection switch. The unit includes 1 or 2 exhaust arms and exhaust hood with damper.
Description
ventilator: 3,000 m3/h, motor: 1.5 kW · 3 x 400 V / 50 Hz
cartridge filter unit with 1 exhaust arm, 2.0 m, Ø 150 mm, 3.0 m, Ø 150 mm, 4.0 m, Ø 150 mm
cartridge filter unit with 2 exhaust arms, 2.0 m, Ø 150 mm, 3.0 m, Ø 150 mm, 4.0 m, Ø 150 mm
additional cost for activated charcoal filter
Cartridge filter unit, mobile with rigid metal tube exhaust arm is available on request
All units are available as stationary Cartridge filter units
High vacuum cartridge filter unit, mobile
suction performance: 500 m3/h, max. Vacuum 20,000 Pa, motor: 4.4 kW · 3 x 400 V / 50 Hz
|
|
Mobile cartridge filter with fully-automatic, dust-related deduster via the POWER SPRAY SYSTEM. Comes equipped with a separator and two durable large-surface filter cartridges.
The controls include a post-cleaning function during idle ventilation time. The unit comes supplied with a filter monitor, sealing face lifter, hour-meter, direction display, cable reel and castors with brakes.
Includes cable bearer, 5 m cable and plug. |
|
| ... products without technical information |
| |
The DC25 Linear DC welding control is ideal for microjoining applications which require exceptional control and highest quality throughput. Weld energy may be programmed in current, voltage, or power in increments as small as .01 milliseconds.
|
|
| Unitek Peco's Dual Pulse Series is a full range of Capacitive Discharge (CD) power supplies for precision resistance welding applications. Dual Pulse Series power supplies are microprocessor controlled, store multiple weld schedules, and provide consistent weld energy. |
|
Hand Held Electronic Force Gauge
An ergonomically designed hand held force gauge.
ADVANTAGES
User comfort "'Ergonomically" designed - for ease of use
One piece unit
Very high accuracy
Swivel head allows access to difficult to reach positions
As with all welding procedures, it is important to eliminate as many variables as possible in order to achieve optimum welding consistently over long periods.
Electrode force is one of the critical parameters in obtaining repeatable, reliable resistance spot welds.
Force can vary because of variable factory air pressure, water in the air lines causing air cylinders to deteriorate and loss of air pressure due to worn seals.
This self contained instrument uses a cell with a force sensor to provide accurate digital read out for auditing weld electrode forces.
Accuracy of this instrument is better than 0.2% and can be switched to read 0-2000 kg, 0-20.00 kN or 0-4400lbs.
In cases of difficult access the head of the swivel head gauge can be swiveled at least ±72º up or down and rotates at least ±90º. Once the desired position is reached it can be fixed by a simple hand tightened knob. A 90 mm long handle is provided for optional use with 2 mountain positions either in-line or at 90º.
A support wrist strap is attached to the gauge so that in the event that it is forced out of the operators hand by misaligned electrodes, it need not fall to the floor and be damaged. |
|
Faults in welding tongs or incorrect process parameters in welding can result in production line waste or defective parts. Checking the electrode force periodically permits spark malfunctions to be detected at an early stage so that repairs can be carried out in good time.
The new Type 9833A test sensor allows precise and reliable measurements to be carried out with minimal electrode gaps. The built-in charge amplifier simplifies the task of mounting and helps to ensure the reliability required by the automobile industry.
|
|
| The MM-601A is an electrode force measuring device for resistance welding machines. By changing the load sell sensor, it is capable of measuring from 0.20 kg to 950 kg (0.44 to 2111 lbs) of weld pressure. |
|
The quality of a spot weld depends on the force applied by the electrodes together with the value of the welding current. For control programs, measuring the force applied by the electrodes is extremely important for maintaining constant production conditions. The Welding Tester instrument is designed for measuring the closing force on welding heads, which can be used either for setting up or for periodical maintenance. The tips are exchangeable for measuring the force applied by different forms of electrodes; the lowest closing dimension is 3 mm.
Different models are available for measuring 0–5000N up to 0-20000N. The new tool has all the ruggedness, quality and accuracy of the other tools in the CENTOR family, specially designed for taking “nomad” measurements in production shops.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
... see all the products in the category
Hoses
|
|
