|
|
|
|
|
|
HUBER+SUHNER designs and manufactures an extensive product portfolio of directional and omni directional antennas for various wireless applications for the communication, transportation and industrial markets. The HUBER SUHNER product portfolio includes Antennas for
- Indoor DAS
- WiFi coverage for office, industrial and warehouse
- RFID portal and forklift antennas
- WiMAX base station, backhaul and subscriber CPE equipment
- Vehicle-mounted exterior and interior antennas for public transportation.
The know-how and many years of design experience gained by HUBER SUHNER antenna engineers allow us to provide the optimum solution for your specific requirements. Besides a wide standard product portfolio, we offer customized solutions to your need. We frequently include an antenna solution inside a customer defined (Industrial Design) housing. Thanks to these skills in wireless communication, it goes without saying that we offer all customers essential support in project co-ordination and after-sales support.
|
|
In a HF product, the antenna plays an essential role: it's the most important link of the chain.
A quarter wave antenna, without its ground plan, will behave practically as a wire, but when its ground plan is sufficient, its efficiency will be maximal.
The antenna must be placed always in high position and clear from all metallic obstacles.
The antenna cable is another important element not to be neglected. Depending on the type of cable used, the loss in dB will be more or less high.
We bring you our advises for all your needs in wireless transmission and radio systems, with our product range for a variety of applications. We can also design radio systems according to your specifications.
|
|
|
|
|
|
ARF45-PRO - Serial to Wifi gateway
The ARF45 are a family of Serial to Wifi gateways. They permit an immediate connection of any serial device to a Wifi network with an enhanced level of security.
Available in a ready to use IP65 case, they allow a data wireless link over 200m.
The range comes in two versions:
* “Standard” model proposes RS232 / RS485 interface & complies with the 802.11b and 802.11g network standards with WPA-PSK (personal) security.
* “Pro” model works in RS232. In addition to all “standard” features, it complies with the 802.11i standard with an “advanced” WPA-2 Enterprise security protocol.
Both versions incorporate “Roaming” technology, making it possible to connect to the nearest Wifi access point and/or the one with the strongest radio signal automatically. This ensures a reliable and uninterrupted connection to the network whatever the environment for applications requiring mobility.
In order to make their use and deployment easy, they have an on-board web server accessible via any standard internet browser (I.E., Firefox). In addition, they offer the option of creating an XML file enabling users to save and duplicate a standard configuration.
* Protocols
- Standard version: TCP-IP, DHCP, BOOTP, ICMP , ARP, UDP, ICMP, SNMP, DHCP, TFTP, Telnet, HTTP, HTTPS, Auto IP, SMTP
- "Pro" model: same as Standard version + v2C, FTP, PPP, SSL/TLS, SSH, RSS, DNS
* Security
- Standard version: WEP64, WEP128, WPA-PS
- "Pro" model: same as standard version + WPA2-PSK + WPA2-Enterprise (EAP-TLS, EAP-TTLS, PEAP, LEAP
* Configuration via RS232 / connexion Telnet / serveur HTTP
|
|
|
Cushcraft's integrated diversity antenna designs feature two separate 2 dBi omnidirectional radiating elements sharing a common backplane and enclosure. The radiating elements are terminated with coaxial pigtails and MMCX connectors that exit the backplane of the antenna. Hence, they can interface with an access point that has been mounted in the plenum above the ceiling if so desired. The complete package dimensions are 5.25" x 2.75" x .75". Both coax length, connector type and package aesthetics can be modified to meet customer requirements. Offices, HealthCare facilities, educational or industrial campuses and shopping malls are just a few of the more common applications for these antenna designs.
|
|
aird Technologies' in-building wireless antennas are particularly applicable in environments where aesthetics and wide angle coverage are necessary for successful wireless deployment. Their surprisingly small size allow the antennas to be hidden almost anywhere, providing an invisible solution for most applications.
External antennas are weather resistant and waterproof high-gain anntenas that provide an excellent choice for outdoor and indoor installation, and can be mounted on the outside of a housing.
|
|
Remote antennas increase the reliability of radio connections by optimizing the transmitting and receiving conditions
Antenna diversity provides stable radio conditions
Suitable for use both in industrial Wireless LAN (iWLAN) radio networks as well as in standard Wireless LAN (IEEE 802.11) at 2.4GHz and 5 GHz with data transfer rates up to 54 Mbit/s
|
|
WLg-ABOARD/N
WiFi Access Point, 2-port Ethernet Bridge, bridge router & WDS Repeater (a/b/g/h) for automotive or outdoor applications.
WLg-ABOARD/N is a rugged equipment designed for applications in road, railways, marine transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounted in trucks, trains, tramways, freighter ships, forklifts, trailers, tractors or cranes, for material handling, real-time information transmission, and inventory management.
It fulfills the most severe requirements in terms of operating environment: from -25°C to +70°C, shockproof and vibration proof, IP66 seal rating for protection against dust and water projections.
The product is UTAC E2 certified (CE standard for electronic equipments installed aboard vehicle), and can thus be installed in full safety aboard of all on-road equipments.
|
|
|
|
|
|
WLg-LINK-OEM
Access Point, Ethernet Bridge, bridge router & repeater (WDS) (a/b/g/h) full module for OEMs.
The WLg-LINK-OEM module used in the ACCESS POINT mode makes it possible to create an industrial WiFi wireless network from any industrial equipment featuring an 10/100 Ethernet interface.
Used in the BRIDGE mode, the WLg-LINK-OEM enables to connect any industrial equipment featuring a 10/100 Ethernet interface to the WiFi wireless network.
WLg-LINK-OEM module can also be used as a WiFi network repeater (WDS) in order to extend radio coverage, device supports both INFRASTRUCTURE and AD-HOC modes.
The WLg-LINK-OEM device is also designed to work as a wireless bridge between the wired MODBUS/TCP or PROFINET protocols and the radio network, this feature allows to connect any MODBUS/TCP or PROFINET equipments to this network.
Thanks to its built-in WEB interface, the setup of the device is achieved using the web browser installed on your computer (Internet Explorer, Netscape, Mozilla ...).
WLg-LINK-OEM doesn't require any additional software to be installed on your computer (no peripheral driver needed).
|
|
|
|
|
|
The WLI-E wireless LAN interface has been designed for applications requiring robustness and reliability in harsh environments or for embedded systems: public transport, trams, buses, trucks, building works machines, tower cranes, conveyors, rolling cranes, etc...
Protected against dust and water to IP66 class, with two M12 connectors (one for power and one for the Ethernet connection), it can be placed directly outside close to the antenna or can be deported (N male connector). It supports the Access Point, Client, WDS (client or AP) modes and provides advanced options such as, for example, a table with selected scan channels.
The setting is done by its very intuitive Web interface with multiple utilities and integrated diagnostic tests (throughput test, statistics, ARP table, log activity, site survey, etc. ...). Access can also be done by Telnet, SSH or HTTPS.
The Wi-Fi compatible WLI-E will impress you with its ease of installation and configuration, its robustness, performance and capabilities. They are a lot of applications, both for transmitting video, audio, data over TCP / IP and also connect various systems such as PLCs, data loggers, SCADA systems, etc...
|
|
|
The RuggedWireless™ family are industrially hardened Ethernet switches which integrate IEEE 802.11b/g Wireless Access Points, with fully managed wired 8-Port Ethernet switches providing six Fast Ethernet copper only ports and two optional copper or fiber ports. With the installation of the RS900W Series wireless access point, a network designer will achieve the integration of wired and wireless networks. The RS900W and RS910W can be configured as an access, client, or bridge device.
|
|
The SeaI/O-410W is a wireless interface to 16 optically isolated inputs and 16 Reed relay outputs. Inputs can range from 5-30VDC, while the Reed relays provide long life switch closures well suited to low current devices. Inputs and outputs are grouped into four-bit segments that each share a common for easy wiring via removable 3.5mm terminal blocks. The SeaI/O-410W is powered from your 9-30VDC source, or select from a variety of Sealevel power supply options.
Communicate with the SeaI/O-410W over 802.11b and 802.11g wireless networks using the Sealevel SeaMAX API software libraries or use any Modbus TCP compliant device. Sealevel's SeaMAX software drivers and utilities make installation and operation easy using Windows 2000, XP and Vista operating systems. Security features include WEP and the latest WPA-TKIP and WPA2-AES encryption standards.
|
|
| ... products without technical information |
| |
|
|
|
|
HUBER+SUHNER designs and manufactures an extensive product portfolio of directional and omni directional antennas for various wireless applications for the communication, transportation and industrial markets. The HUBER SUHNER product portfolio includes Antennas for
- Indoor DAS
- WiFi coverage for office, industrial and warehouse
- RFID portal and forklift antennas
- WiMAX base station, backhaul and subscriber CPE equipment
- Vehicle-mounted exterior and interior antennas for public transportation.
The know-how and many years of design experience gained by HUBER SUHNER antenna engineers allow us to provide the optimum solution for your specific requirements. Besides a wide standard product portfolio, we offer customized solutions to your need. We frequently include an antenna solution inside a customer defined (Industrial Design) housing. Thanks to these skills in wireless communication, it goes without saying that we offer all customers essential support in project co-ordination and after-sales support.
|
|
In a HF product, the antenna plays an essential role: it's the most important link of the chain.
A quarter wave antenna, without its ground plan, will behave practically as a wire, but when its ground plan is sufficient, its efficiency will be maximal.
The antenna must be placed always in high position and clear from all metallic obstacles.
The antenna cable is another important element not to be neglected. Depending on the type of cable used, the loss in dB will be more or less high.
We bring you our advises for all your needs in wireless transmission and radio systems, with our product range for a variety of applications. We can also design radio systems according to your specifications.
|
|
|
Cushcraft's integrated diversity antenna designs feature two separate 2 dBi omnidirectional radiating elements sharing a common backplane and enclosure. The radiating elements are terminated with coaxial pigtails and MMCX connectors that exit the backplane of the antenna. Hence, they can interface with an access point that has been mounted in the plenum above the ceiling if so desired. The complete package dimensions are 5.25" x 2.75" x .75". Both coax length, connector type and package aesthetics can be modified to meet customer requirements. Offices, HealthCare facilities, educational or industrial campuses and shopping malls are just a few of the more common applications for these antenna designs.
|
|
New! Wi-Fi (802.11b/g) Ethernet to Serial Device Servers
Connect your remote serial devices virtually anywhere
Features
(1)Wireless connectivity to serial devices
(2)Dual AC/DC power inputs
(3)Virtual COM, Straight IP and Paired modes
(4)Web Server Configuration Software
(5)Terminal block power connections
(6)DB-9 serial connectors
(7)DIN rail, Panel, or Desktop
Benefits
(1)No need to run new cables
(2)Power supply redundancy
(3)Ensure compatibility of networking
(4)Easy programming remotely or locally
(5)Ideal for industrial installations
(6)Easy installation
(7)Flexible mounting configurations
Applications
Industrial/factory automation devices (PLC's, motor controls, process analyzers, instruments) automatic warehouse control, hospital/laboratory automation.
|
|
4-BAY Network Attached Storage Platform based on Intel IOP348 processor with hardware RAID
Features
* Intel IOP-348 Processor
* Intel XScale® Processor with core speeds up to 1200 MHz and 512 KB L2 cache.
* High-performance RAID system-on-a-chip with an integrated 3 Gb/s SATA II controller. Supports RAID 0, 1, 5 and 10 with hardware acceleration
* Massive 4 Terabyte storage and file-sharing capacity
* Supports up to 4 high-capacity serial ATA hard drives with JBOD RAID.
* Expandable storage architecture
* Dual eSATA ports offer rapid expansion and exceptional performance
http://www.lannerinc.com
|
|
|
|
|
|
WAN and LAN TRANSMITTERS for analog variables
with WiFi or Fast-ETHERNET interface
The WDT-4000/... and EDT-4000/... series are LAN-transmitters with interface
WiFi or Fast-Ethernet, including an integrated circuit board for
direct input signal and data acquisition with internal processing of field
variables located near to an access point. Suitable for acquisition and
trasmission by LAN of analog variables in SCADA systems.
WiFi or Ethernet
. ANALOG SIGNALS TRANSMITTER BY LOCAL AREA NETWORK
. 2 x Pt100, mV, 0...4-20 mA, (1) THERMOCOUPLE CJC INPUTS
. 1 x PULSE-COUNTER AND FREQUENCY INPUT
. SPECIFIC VERSIONS FOR CHEMICAL VARIABLES, HUMIDITY, ELECTRIC, LEVEL, PRESSURE, FLOW, VIBRATION, ETC.
. WDT-4000/.. : WiFi COMMUNICATION WITH 1/2 WAVE ANTENNA
. EDT-4000/.. : Fast-ETHERNET COMMUNICATION WITH RJ-45
. RS-485 MODBUS COMMUNICATION AS STANDARD
. ENCLOSURE RATING IP65 FOR FIELD MOUNTING
. POWER SUPPLY 85...265 Vac or 12 / 24 Vdc (OPTION)
. MOUNTING ON WALL OR ON PIPES UP TO 2" (50 mm)
. PROGRAMMABLE BY INNER KEYPAD OR BY LOCAL AREA IP-65
|
|
| ... products without technical information |
| |
|
|