|
|
|
Electric, hydraulic or pneumatic up to 10 tons. This range of capstans is conceived as well for the marine applications as for intensive handling in the fields railway and industrial.
|
|
For more than 30 years, group DLD France has developed a single know-how and multiple applications in the field of traction by cable and winching with its service Industrie, WARN-STARTER.
Choke Engineering and its integrated research department assist you in the definition of your schedule of conditions and proposes several solutions to you: flexible standard winches with multiple options or special winches with the request developed for industrial handling, example:
Capstans:
- Reducers with endless screw or planetary gears on production line or railway handling, etc...
- Of 600 daN to 10.000 daN
Winches offshore oil rig tires:
For towing and lifting, even the lifting of personnel, these winches are manufactured in conformity with the standards in force and fulfill the requirements of durability specific to the environments offshore oil rig.
|
|
RANGE ARES
Electric winches of towing and lifting for industrial applications in workshops or on building sites.
- Reducer under casing
- Electric Winches 400V: Polyphase motor IP54
- Electric Winches 230V: Engine single-phase current IP54
- Brake of safety to power failure
- Case of ordering of safety 24 V
- Telegraphic Order 5m with emergency stop
|
|
Electric winches of towing and lifting for industrial applications in workshops or on building sites.
- Reducer under casing
- Electric Winches 400V: Polyphase motor IP54
- Electric Winches 230V: Engine single-phase current IP54
- Brake of safety to power failure
- Case of ordering of safety 24 V
- Telegraphic Order 5m with emergency stop
|
|
Hydraulic winch capstan with constant traction: Range Atlas
- Maximum Force of traction whatever the length of cable rolled up
- Constant Speed
- Unlimited Capacity of rolling up
- No wear of the cable
|
|
Application
Towing
Motorization
Hydraulics
Standard characteristics
Planetary gear reducers
Options
Options winch
- Fluted car
- Roller press-cable
- manual direct-drive dog clutch
- Brake with band manual or automatic
- Crank of help
- Trancanage
- Headstock capstan
- Marine Painting
Options dispositiof of order
- Hanging Box IP65
- End of the road high and low
- Limiting device of load
- Variation speed
- Slackness of cable
- Radio control
- Hydraulic Distributer
- Pneumatic Distributer
- Untié of treatment of air
|
|
Range coils and endless screw
For towing or lifting in full safety.
A very robust construction for a maintenance minimum:
- Reducer coils and screw hooded
- Brake of safety to double non-return pawl
- Mural Assembly
- External Painting
Of 250 daN to 5.000 daN
Compact and economic range
- Spur gear Reducer
- Pawl of safety
Of 425 daN to 2.300 daN
|
|
The PULLZALL is not only one new tool, it is a new way of working.
Portable, the PULLZALL enables you to move 450 kg in all the horizontal, vertical or intermediate situations.
A piloting ultraprécis of the end of the fingers allows you a rigorous, flexible and reversible positioning.
Available in 200 V and version without yarn.
|
|
WARN SERIES 18
- Electrical motor with D.C. current 24V. Power 4,5 CV
- Thermal trip
- Mechanical Brake of the type "with cam"
- Reduction on 3 floors of planetary gears i=315/1
- Décrabotable by revolving lever
|
|
... see all the products in the category
Winches
|
A range of 200 kg to a ton.
L 100 200 kg Van/Plate
M 250 250 kg Van/Plate
M 500 500 kg Van/Plate
F 500 500 kg Plate
F 1000 1.000 kg Plate
Strong points:
Them M 250 and M 500 have a dismountable arm: several barrels for only one arm.
- Simple Assembly
The Sherpa Translator: Only charge and position 300 kg in a commercial vehicle.
- The Sherpa Translator is intended to equip with the commercial vehicles of van type. It is integrated completely into the body.
- It raises loads from 30 to 300 kg up to 15 m under the level of the ground.
- The Sherpa Translator moves the load with its carriage of translation, positions it at the place wished in the van.
|
|
Baumer Starter Kit - Just Unwrap and Go...
Your fast and easy access to the Gigabit Ethernet technology.
Evaluating a new camera should be as simple as snapping your fingers. This is the idea behind the Baumer Starter Kit being offered for our multifaceted models of Gigabit Ethernet cameras (VGA up to 5 megapixels). No longer will you need to spend all your time searching for all necessary cables and connectors to get the camera running. With the Baumer Starter Kit you receive an all-in-one package for a effortless evaluation in your application.
In addition to a Baumer Gigabit Ethernet camera of your choice and the associated Software Development Kit (SDK) for Windows, the Baumer Starter Kit contains a Gigabit Ethernet PCI interface board, a Gigabit Ethernet cable (4.5 m), a trigger flash cable (5.0 m), a power supply with 3.5 m cable, a front mounting adapter and a tripod mounting adapter. Also experienced users benefit from this composition.
The SDK associated with the Starter Kit was developed by Baumer for the best possible integration and is especially suitable for the requirements of Baumer cameras. Our customer support is available for further, competent assistance. You receive "everything from a single source" made by Baumer - exploit the advantages.
|
|
|
|