|
|
Bekaert makes a complete range of steel wires for the brush industry . - PET coated wires for twisted brush handles - Galvanised wires for twisted brush handles - Bessemer wire for fine polishing brushes - Flat oiltempered wires for street sweepers - Oil tempered round wires for industrial brushes - Round wires, crimped and uncrimped, for technical brushes, street sweepers and airport sweepers .
Technical info
Diameter ranges :
Bessemer : 0.06 - 0.22
PET Coated : 1.40/1.60 - 2.80/3.00
Galvanised : 1.40 - 5.00 mm
Round wires : 0.30 - 0.70 mm
Oil tempered : 0,30 - 0,80 mm
|
|
|
The expertise of Thermo technologies also applies to the high-tech wires field. Coated with precious metals, assembled in strands (wires made of extra-fine wires), these wires acquire exceptional resistance and pliability, tested and recommended by the most demanding sectors: telecommunications, electronics, space aeronautics, medicine…
|
|
Stainless steel wire coated with coloured PET. Typical use where both corrosion resistance and colours are requered . Applications in decoration, cables, furnitures and spokes . Functional use to distinguish springs or hoses .
Technical info
Wire diameters from 0.30 mm up to 3.00 mm
Pet coating in 6 standardised colours .
|
|
Flattened precision wire with applications in textile and automotive industry as well as for medical instruments .
Technical info
Heat treatable steel in accordance with DIN 17 200 and EN 10 083.
Spring steeld DIN 17 222 and DIN 17 223-1.
Stainless steel in accordance with DIN 17 244 and DIN 17 440 .
Hard rolled, oiltempered, induction hardned, annealed.
From 0,7 mm2 up to 380mm2
Shapes : flat, square, rectangular, D-shape, trapezoidal, triangular, hexagonal, ...
Tensile strength 250- 2400 N/mm2.
Edges : natural round, rolled or rounded off.
|
|
|
We are a manufacturer to provide superior material for fine spring industry with all specifications and articles from ø0.07-ø0.6mm. We have excellent inspection system which assures our superior product quality.
|
|
|
Hard drawn round or flat wire according to standards EN 10270/3, ISO 6892, ASTM A313 and BS 2056 . Applications as compression, extension and torsion springs for use where corrosion and heat resistance are important features. Uniform coating and adapted packaging to optimise the coiling process . Use in ecltrical, chemical, medical and food industry as well ass in important high technological sectors like aviation, automotive and engineering .
|
|
All wire is available in cut-and-straightened lengths and in bulk quantities as a special order
All packaged wire is shrink wrapped and bar coded
0.006" to 0.078" are packed in easy to use pull-type dispenser boxes.
Applications include springs, wire forms, control linkages, armature binding, ceramic cutting and a variety of industrial uses
|
|
Bekaert manufactures a wide range of stitching wires with all possible finishes : galvanised, tinned, plastic coated . A wide variety of colours is possible . Besides the round wires, also flat wires can be delivered .
Technical info
Electro galvanised and tinned : 045 mm - 1.20 mm
Plastic coated : 0.55 mm - 0.60 mm
Flat : according to customers wish
|
|
Precision wire made of copper, brass, bronze and nickel silver for the following applications:
-Spark erosion (EDM)
-Welding, brazing and soldering
-Electronic components
-Optic
-Anchor wire
-Medical
-Redraw wire, Specialtes
Plan wire, coated wire, composite wire
Round wire, flat wire, square wire, serrated wire, grooved wire
|
|
More than 1000 references from 10 microns to 125 mm opening.
These meshes find applications in separation techniques, protection, armature and materials handling.
GANTOIS converts all these wire meshes for offering you finished or semi-finished products designed according to the characteristics and specifications defined by you.
|
|
Mesh
Croft Engineering Services can supply wire mesh in all manner of styles carrying a wide range of stock that can usually be delivered next day. Along with supplying mesh the company can add significant value for customers by forming the raw material into products. The uses of mesh are vast and varied and the company has provided solutions for a whole range of industries.
|
|
Specialty Wire
ACS Industries, Inc.’s Specialty Wire Division has manufactured high-quality stainless steel wire, carbon steel wire, and nickel alloy wire since we installed our first fine wire drawing equipment in 1947. ACS offers superior quality high-value alloys for a variety of industrial applications. A key differentiator in our knitted wire mesh business, our internal wire drawing capabilities make ACS the world’s largest vertically integrated knitted wire mesh manufacturer.
ACS offers the following high-value alloys for sale:
* 300 series stainless steel fine wire
* 400 series stainless steel fine wire
* A286 fine wire
* Inconel 600 fine wire
* Inconel 601 fine wire
* Monel 400 fine wire
|
|
|
|
|
|
The Carpenter name has been synonymous with excellence in stainless steel. After all, we developed the world’s first free-machining stainless and continue to set new benchmarks in machinability. We also manufacture high-strength and high-temperature alloys, magnetic and controlled-expansion alloys, superior corrosion-resistant alloys and other specialty metals.
Based on a longstanding commitment to research and development, Carpenter continues to set new industry standards in the manufacture of specialty steels and alloys.
These steels and alloys can be made in a variety of forms including billet, bar, wire, fine wire and ribbon, custom shapes, plate and precision strip. To obtain and deliver the high-performance metals needed today, Carpenter utilizes some of the most advanced equipment in the industry, skilled engineering and production staff, and sophisticated quality control procedures.
Welding Alloys (wire/ribbon)
* Custom 630 (17Cr-4Ni) Stainless
* Custom 450® Stainless
* Type 410 Stainless
* Type 347 Stainless
* Type 309 Stainless
* 22Cr-13Ni-5Mn Stainless
* Type 316L Stainless
* CP Titanium Grade 2
* CP Titanium Grade 4
* Ti 6AI-4V
* 18Cr-5Ni-12Mn
* Cr-Ni-Co-Mo
* Type 316L Hi Sil
* Type 309L Hi Sil
* Type 309L
* Type 308L Hi Sil
* Type 308L
* Type 308
* Type 202
* Invarod
* Type 310 Stainless
|
|
Stainless Wires
Corrosion resistant - High temperature resistant - High mechanical properties
Bekaert, a specialist in small sizes
Round high tensile spring wire according to standards EN 10270/3, ISO 6892, ASTM A131 and BS 2056 Aerosol applications in chemical industry, food, paints, perfumes. Uniform coating and adapted packaging to optimise the coiling process. Bright or nickel coated surface .
|
|
GANTOIS manufactures and markets welded screens used in various industries:
Agriculture
Engineering
Automobile
Aeronautics…
The applications are varied:
Protection
Ventilation
Aeration
Drying
Treatment…
The WELDED SCREENS are sold in rolls of finished or semi-finished products for meeting your needs according to your requirements and specifications.
|
|
Titanium Alloys for Demanding Applications
Dynamet Incorporated, a subsidiary of Carpenter, has grown to be a leading domestic and international supplier of titanium alloy products for the aerospace, medical, consumer, motorsports and recreation industries. Forms include bar, wire, fine wire, shapes and strip.
Titanium offers the benefits of corrosion resistance, light weight, strength-to-weight ratios and biocompatibility.
Rely on Dynamet to understand your unique needs and provide customized solutions.
Research our titanium alloys, access our literature, or contact us for more information.
|
|
|
Italbras BrazeTec manufactures brazing alloy wires on spools or coils. All silver brazing alloys containing or not containing cadmium, AgCup alloys, CuPalloys and Aluminum-silicon alloys are available. Wire diameters are from 4mm to 0,20 mm. Spool weight is from 15/10 Kgs to 200 grams. Wire may sometimes be cored by brazing flux.
|
|
|
Italbras manufactures the whole product range of brazing and soldering wires. There are brazing wire made out of silver alloys (with or without cadmium), brazing/soldering wires made out of AgCuP and CuP alloys, aluminum-silicon alloys, copper based alloys and brasses. Wire diameters are available from 0,25 mm. Wires can be on spools of several weights according to customer requests.
|
|
bercoweld® - wire for welding, brazing and soldering made of copper. Our product range comprises more than 20 alloys of the material groups
- low-alloyed copper alloys
- tin-bronzes
- aluminium-bronzes
- copper-nickel-alloys
- spezial alloys
Premium quality made in Germany. Directly from the manufacturer.
|
|
MIG, TIG and SA welding wire,TüV and Db approved. Precision layer wound . Use in electrical , chemical , medical end food industry as well as in important high technological sectors like aviation, automotive and engineering .
Technical info
Diameters from 0.80 till 4.00 mm on spools, reels or lengths .
Different alloys able to weld austinic CrNi as well as ferritic steels .
|
|
The Wire Booster assists the wire feeding between the pail pack and the wire-feeding unit of a robot welding system or a manual power source.The driving rollers of the Wire Booster are separated from the running motor through a magnetic clutch. The wire is fed by the magnetic clutch, as soon as the main drive of the robot employs force on the wire. Through this functional principle the Wire Booster does not necessarily have to be connected or synchronised with the main drive.Wire feeding problems can now be solved fast and without any unnecessary installation.
For detailed information please visit our homepage.
|
|
|
in order to obtain the best result when braze welding with weld material, sinergo has developed digital-control tools wich can automatically apply soft or silver solder. These devices allow you to shorten working time, assuring always a high, checkable and repeatable quality.
|
|
|
Smooth wire feed is critical to many welding applications. ESAB meets the need with ready-to-weld feeder packages featuring the latest technology for easy functionality and dependable operation.
|
|
Electrical compacting head, type CEP018.
- Compacting process according to an industrial patent from the company technax.
- Compacting of components, like copper braid, cable, strand, etc.
- Compacting sections from 0.2mm² to 2 mm² max.
- Head to be connected on a manual station or an automatic welding machine.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
