|
|
|
SENCITY®LINK operates at a frequency of 60 Ghz with a net data rate of 100 Mbps full duplex over a distance of up to 800 m (2600 ft). Measuring only 16x16 cm (6.3"x 6.3"), its compact size is due to deep integration of its active and passive components. The SENCITY® Link system is unique in its small unobtrusive size and ease of installation which is facilitated by the simplicity of an optical pointing and alignment bracket. Extensive trials and customer installations have proven that this HUBER+SUHNER solution mitigates expensive civil works and minimizes visual impact.
|
|
PC-W provides wireless connectivity for serial devices of RS-232/422/485 and Ethernet devices. It is suitable for bridging communications in places difficult to wire or impractical to wire and also useful for mobile user interfaces, especially in an industrial environments. It can be used with all Brainchild's products HMI, IO modules, recorders & controllers or other industrial products.
FEATURES:
* 2 numbers serial ports
* Selectable RS-232/RS-485/RS-422 serial mode by software
* Transparent between Ethernet to Wireless networking
* Support UDP, TCP server and client protocols for Virtual COM mode and pair connection
* Configurable via built-in web server and Windows-based utilities
* Metal housing and IP50 standard with DIN-Rail mounting
* 15KV ESD protection for serial ports
* IEEE 802.11g 54Mbps wireless network connectivity
* Standard 2.4GHz High-gain antenna
** Please visit us at coming exhibition Hannover Messe 2009 at "Hall 9, Stand H24" during April 20-24, 2009.
|
|
|
NETGEAR’s routers and gateways not only work great, but also look terrific too. Inside our award-winning design you will find wireless routers with the range and coverage you need for today’s demanding applications and home networks. Count on them for ease-of-use, quality, reliability, and security.
|
|
Ethernet Air-Pack
Ready-to-use Point-to-Point wireless Ethernet Bridge
Ethernet Air-Pack is a ready-to-use solution designed to :
- replace any Ethernet cable between equipments (PC, IP video, printers ...),
- replace the network cable between the RJ45-wall outlet and the computer
- or even to establish a wireless bridge between two independent Ethernet networks (between two buildings, two PLC's networks ...).
The kit is built around two pre-configured WiFi units already associated, installation doesn't require any configuration.
|
|
HyperLan-Pack
Ready-to-use Point-to-Point Wireless Ethernet Bridge
HyperLan-Pack is a solution to establish a high speed Ethernet wireless link between buildings, factories, CCTV cameras, offshore platforms and temporary installations ... to connect Ethernet networks or Ethernet devices between each other.
HyperLan-Pack is available in two versions : long range (up to 5 Km) and medium distance (up to 1.5 Km) at 40 Mbps.
Range increase significantly (up to 50 Km) if data rate is reduced to 10 Mbps.
The kit is built around two WiFi units and two parabolic antennas, installation is very easy as described below :
Antenna height calculation depending on distance and land topography
Antenna mounting on masts
Antenna tilt calculation using ACKSYS software and a GPS
Antenna vertical alignment according to calculated tilts using a clinometer
Antenna horizontal alignment using a compass
Ethernet cable connexion on each unit
Radio quality and sustained data rate checking
|
|
|
|
|
|
Moxa's AWK-5222 AP/bridge/client has two independent RF modules to resist disconnections caused by radio interference. This robust feature makes the AWK-5222 series the most stable wireless solution for critical industrial wireless applications. The two independent RF modules create a exclusive wireless redundancy mode to increase the reliability of your entire wireless network. The AWK-5222 not only gives you a highly reliable solution for your industrial wireless networks, but also offers you a greater variety of wireless connection configurations to fit different wireless applications. For example, its wireless bridge mode is designed to optimize the problem of WDS (Wireless Distribution System) mode’s poor performance. On the other hand, the AWK-5222’s AP Client mode can be used to provide Internet access in areas where cabling would be too expensive or impractical to install. The AWK-5222 is a rugged, IEEE 802.11 a/b/g-compliant, 3-in-1 industrial wireless AP/bridge/client also compliant with IEEE 802.3af Power-over-Ethernet (PoE). With high speed Turbo Roaming™, which is great for rolling stock applications, and fast BSS (Basic Service Set) transition between access points, data transmission latency is prevented and wireless network roaming is seamless and super fast. On top of it all, the AWK-5222 is equipped with dual Ethernet ports that support RSTP or Turbo Ring™ for added reliability for your entire network.
Features:
‧Redundant dual-RF design for rapid failover
‧Industrial wireless AP/bridge/Client with IEEE 802.11a/b/g
‧100 ms Turbo Roaming™ for rapid handover during client roaming
‧RSTP for dual Ethernet redundancy
|
|
WLg-xROAD/S is a rugged equipment designed for applications in road and rail transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounted in trucks, city buses, forklifts, trailers, tractors or cranes, for material handling, real-time information transmission, and inventory management.
It fulfills the most severe requirements in terms of operating environment: from -25°C to +70°C, shockproof and vibration proof according to MIL-STD-810F standard, protection against dust and water projections.
The product is UTAC E2 certified (CE standard for electronic equipments installed aboard vehicle), and can thus be installed in full safety aboard of all on-road equipments.
|
|
|
|
|
|
Moxa's OnCell 5004/5104 is a high-performance industrial grade cellular router that allows up to 4 Ethernet-based devices to simultaneously use a single cellular data account for primary or backup network connectivity to remote sites and devices. They are typically deployed as the primary WAN link in areas or applications where using wired connections is too costly or unfeasible. In areas that can be wired, OnCell 5004/5104 can also be installed as a backup communication link in case the primary cabled link fails. The OnCell 5004/5104 is an intelligent, industrial strength and multi-functional cellular communication platform for the machine-to-machine (M2M) market. It differs from general routers by focusing on monitoring and managing remote sites and devices with RJ45 connectors, such as SCADA devices, programmable logic controllers (PLCs), and remote terminal units (RTUs). In addition, the OnCell 5004/5104 uses 12 to 48 VDC power inputs with a screw-on design for greater reliability, and its serial ports come with 15 KV ESD line protection to keep your system safe from unexpected electrical discharges.
The difference between the OnCell 5004 and OnCell 5104 is that the OnCell 5104 has an IA design and can be attached to a DIN-rail. In addition, the OnCell 5104 comes with a built-in relay output that can be configured to indicate the priority of events when notifying or warning engineers in the field, and the two digital inputs allow you to connect basic I/O devices, such as sensors, to the cellular network.
Features:
․Quad-band 900/1800, 850/1900 MHz GSM/GPRS
․Connect up to 4 10/100BaseT(X) devices
․Industrial primary and backup wireless WAN connectivity
|
|
Flexible Integrated Applications and Services
The Process Automation Suite offers many "under the bonnet" features like date and time stamped events, Telemetry, Auto I/O Scanning which are all standard offerings.
When combined together within a Control System the flexibility of the system becomes apparent, allowing the independent delivery of functionally different services all on a single system.
|
|
The 9160 G2 is our newest and most advanced Wireless Gateway. This long range wireless access point enables you to mix and match RF technologies to best suit your requirements. The 9160 G2 offers support for dual 802.11 radios for a range of wireless applications. The 9160 G2 delivers robust security, with the ability to scale from basic WEP all the way up to 802.11i with AES encryption.
Industrial housing for demanding environments
Dual radio, 2.4 and 5 Ghz multi-band access point supporting 802.11 a/b/g/ radio standards
Enhanced real-time diagnostics and configurations via SNMP, HTTP, Telnet or serial console
Scaleable security
|
|
| ... products without technical information |
| |
Tenova TAKRAF has been building conveyor bridges since 1924.The mobile conveyor bridges in the German Lignite mines transport the material from the excavators directly crossing the open pit onto the dump site. Special operational conditions there allow capacities up to 29.000 m³/h from three Bucket Chain Excavators, a span length (distance between the supports) of 270 m and a dumping height of 74 m. The 13400 t Conveyor Bridge travels on rails. One support stands on the excavation site, the other one on the dumping side. The extraction of the lignite takes place between the supports.
Another application of Tenova TAKRAF conveyor bridges are Dumping the Heap Leach Systems. These conveyor bridges are also fully mobile and transfer the material from reclaimers, overland conveyors or connecting conveyors to the downstream conveyors, Mobile Transfer Conveyors or Stackers (Spreaders) as seen in Gaby/Chile or Toquepala/Peru.
|
|
Tenova TAKRAF developed and supplied Slope Conveyor Bridges as a mobile link between a Bucket Wheel/Chain Excavator and a shiftable conveyor installed on a bench with a higher level. The advantages of Slope Conveyor Bridges are on the one hand the location of the face conveyor already on the next higher level and on the other hand the elimination of a ramp conveyor. The slope will be bridged by the Conveyor Bridge without any earth work.
Tenova TAKRAF's Slope Conveyor Bridges in Kazakhstan have a capacity of 5500 m³/h and can handle height differences up to 28 m.
|
|
Tenova TAKRAF has been building conveyor bridges since 1924.The mobile conveyor bridges in the German Lignite mines transport the material from the excavators directly crossing the open pit onto the dump site. Special operational conditions there allow capacities up to 29.000 m³/h from three Bucket Chain Excavators, a span length (distance between the supports) of 270 m and a dumping height of 74 m. The 13400 t Conveyor Bridge travels on rails. One support stands on the excavation site, the other one on the dumping side. The extraction of the lignite takes place between the supports.
Another application of Tenova TAKRAF conveyor bridges are Dumping the Heap Leach Systems. These conveyor bridges are also fully mobile and transfer the material from reclaimers, overland conveyors or connecting conveyors to the downstream conveyors, Mobile Transfer Conveyors or Stackers (Spreaders) as seen in Gaby/Chile or Toquepala/Peru.
|
|
Tenova TAKRAF developed and supplied Slope Conveyor Bridges as a mobile link between a Bucket Wheel/Chain Excavator and a shiftable conveyor installed on a bench with a higher level. The advantages of Slope Conveyor Bridges are on the one hand the location of the face conveyor already on the next higher level and on the other hand the elimination of a ramp conveyor. The slope will be bridged by the Conveyor Bridge without any earth work.
Tenova TAKRAF's Slope Conveyor Bridges in Kazakhstan have a capacity of 5500 m³/h and can handle height differences up to 28 m.
|
|
Series of newest advanced models of Mikrosam's CNC machines for processing marble, granite and stones. This CNC machines has been designed to offer maximum flexibility and much opportunity for machining of marble, granite and stones. Traditional qualities combined with the most advanced technological innovations that were already implemented have made our machine ideal solution for marble, granite and stone industry.
High productivity machines, ideal for drilling, milling, 2D and 3D modelling, lettering, engraving, internal and external edging, bevelling, grooving, cutting with strait and convex disc.
|
|
| ... products without technical information |
| |
|
|
|
|
C.L.M. produces aluminium bridges with load capacities from 400 to 5,500 Kg, lengths up to 6 metres and widths up to 1.25 metres. The standard range comprises 2 versions, developed to offer 30 models. They all have stow-away or removable handrails.
Bridges are used mainly on construction sites, as safety equipment for passage over diggings and over gaps of all kinds (e.g. links between scaffolding structures, between buildings, etc.).
C.L.M. bridges comply with Italian Presidential Decree n. 164, since they have a parapet 1 metre high with midway rail and foot-barrier 20 cm high.
Common features of all bridges:
-Non-slip surface;
-Wheel-chair-friendly flush-fitting ends without steps;
-Safety side foot-barriers 240 mm high (compliant with Italian Decree 164 of the 7th January 1957);
-Stow-away handrails 1,000 mm high (compliant with Italian Presidential Decree n. 164 of the 7th January 1957);
-4 holes for fixing the base to the ground;
-Side handles to facilitate transport;
-Special sizes available on request.
|
|
| ... products without technical information |
| |
Hydraulic dampers are more and more required for structures, stabilising the bridge girder, buildings, cables and earthquake protection.
Hydraulic dampers are used to reduce loads during a seismic event and to provide damping.
|
|
|
A natural rubber disk that is completely enclosed in a steel pot allows tilting movements around any horizontal axis due to its capacity to deform.
|
|
The Modular System for Engineering Structures
PERI engineers have created ideal project and connecting method combinations from known tunnel, bridge and construction engineering load combinations, and developed this to form a versatile construction kit. This means load-optimized and geometrically-adapted supporting formwork can be built from a large selection of system components.
VARIOKIT, the engineering construction kit with rentable, standardized components, is the solution for numerous requirements in civil engineering:
- fast
- safe
- cost-effective
In the process, PERI provides technical information for each project e.g. operating instructions and assembly drawings. Static calculations and assembly support are also integral elements such as the constant support given to contractors and help provided with new tasks for current projects. For all construction projects, PERI can provide everything from one source.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|