|
|
| The current family of Scanner EFM Flow Computers represents more than 70 years of measurement expertise culminating in the on-going development of electronic measurement technology. As stand alone units NUFLO flow computers and automation products can collect, display, process and store data for historical and real-time measurement and reporting. As part of an engineered automation system, customers can pick and choose from a variety of options to create solutions tailored to specific requirements. For this reason, NUFLO engineered systems are becoming a standard for major oil and gas production, transmission and distribution companies. |
|
For non-flammable petroleum spills, use PIG® Oil-Only Rolls.
Sometimes you simply need a mat to last longer and absorb more. With a super-thick bottom and super-tough top, FAT MAT™ Rolls are perfect for hard-to-reach areas, wet walkways, big cleanups or any other job requiring long life and high capacity! |
|
For non-flammable petroleum spills, use PIG® Oil-Only Rolls.
Sometimes you simply need a mat to last longer and absorb more. With a super-thick bottom and super-tough top, FAT MAT™ Rolls are perfect for hard-to-reach areas, wet walkways, big cleanups or any other job requiring long life and high capacity! |
|
9F59 "T, W & V" series Under Oil (OSP)
Backup current-limiting fuses are designed to be used in series with another protective device (such as an expulsion fuse) to give protection through the complete range. OSP stands for Oil Submerged Protector. These fuses are sealed against the ingress of oil. Each fuse is given a helium mass spectrometer leak test to prove the integrity of the seal.
Features and Benefits:
Complete oil-submergibility
Prevents violent transformer failure from high-fault currents
Proven field performance
100% factory-tested for hermetic seal
Designed and tested for expected transformer duty cycles
Product Scope:
From 8.3 to 23kV
From 40 to 300A
|
|
SITRANS FUH1010 clamp-on non-intrusive ultrasonic flowmeter is ideal for applications carrying crude oil, refined petroleum or liquefied gas. The meter has three application areas: Interface detectors, volumetric flowmeters and mass or standard volume flowmeters. Available in single, dual and optional four beam configurations, with choice of IP65 (NEMA 4X) or IP65 (NEMA 7) and IP66 (NEMA 7) wall mount enclosures.
|
|
All our products are manufactured to the most exacting
quality standards. We hold a global ISO 9001 registration for
our operations, which follow a uniform quality policy and
apply rigorous quality management systems.
Quality control procedures include statistical process control,
daily process and product audits, and tube traceability systems. |
|
Contrary to popular belief, tensile strength is not the only parameter used to judge a palm oil mill chain. In fact it is NOT the most important parameter. A more important feature, called WEAR RESISTANCE is more critical when a palm oil mill chain is to be selected.
WHY?
Because safety factor has been taken into consideration at design stage and when a chain is selected, it means that the tensile strength of the chain meets that of the design value. So there is no necessity to use a chain with much higher tensile strength than the design value.
On the other hand, the understanding of WEAR RESISTANCE is more complex. First of all, it does not have a unit of measurement (such as KN, kgf or lbf in tensile strength). The measurement is simply chain elongation measured in terms of percentage of elongation (amount of elongation to the original chain length expressed in percentage). So the smaller percentage means a better chain used in the same period of time. Generally, a conveyor chain needs replacement when it reaches 2 % elongation. The most important measurement is therefore how long before a chain reaches its life span of 2 % elongation. |
|
HAUG PISTON COMPRESSORS FOR OIL-FREE COMPRESSED AIR
HAUG guarantees technically and economically optimal solutions for compressed air supply, with the security of a constant oil-free quality of the compressed air.
Universal ways of operation
Due to the dry-running technology the HAUG piston compressors can be out of operation, without causing any problem compared to lubricated-compressors and screw compressors. Operation in idle run mode is not required.
Universal application for:
· Continuous operation
· Intermittent operation
· Emergency or reserve operation
|
|
HOT OIL
Hot oil and fire retardant belt
Hot, potentially flammable products
Products containing oil & fat
Ideal for cattle feed & products with high fat content
|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks.
RCS system
For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system. With the RCS an oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck.
The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
RCS PLUS system
The RCS PLUS is an accurate hydraulic weighing system for forklift trucks. On a forklift truck with a capacity of 2.500 kg the weight graduation is displayed in steps of 2 kg, with a 5 kg tolerance (+/- 0.2%). The RCS PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a valve block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks.
RCS system
For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system. With the RCS an oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck.
The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
RCS PLUS system
The RCS PLUS is an accurate hydraulic weighing system for forklift trucks. On a forklift truck with a capacity of 2.500 kg the weight graduation is displayed in steps of 2 kg, with a 5 kg tolerance (+/- 0.2%). The RCS PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a valve block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
|
|
Wellhead control units (DHSV / MV / WV / BOP / ESD)
Hydraulic test units
Gas test units
Chemical injection units
Pressure range up to 30,000 psi
Valves, fittings, tubing according to NACE
|
|
Customized hydraulic power packs, and power packs with submerged motors
A creative manufacturer of Brevini Fluid Power Group, the main characteristic of OLEODINAMICA REGGIANA is to establish a closed partnership with his customers.
This co-operation begins as hydraulic project advising, up to the production and supply, from concept to completion.
Thanks to our customized production, the application field can be in mobile sector (hydraulic truck gates, preparations for industrial body shops etc.) or in industrial sector (presses, lifts for disabled, loading ramps etc.).
Our range of products is completed with, in-line valves, fittings and flexible hoses. All our products are strictly tested for efficiency and reliability.
|
|
MAMCO/LEFOO LF-20 PRESSURE SWITCH
Because of its special internal design this switch can tolerate high pressure spikes inherent on many pressure systems. The switch is factory calibrated but in the case that adjustment is needed in the field the switch offers an adjustment screw to facilitate any fine tuning required. The standard diaphragm employed by Mamco is polyimide (Kapton) making it compatible with many gases and liquids. Several other diaphragm materials are available that make the switch compatible with many mediums. Various electrical terminations are available including ¼ tabs and a metric-pack connector that forms a tight seal when connected.
Because of their ruggedness the Mamco LF-20 is a popular choice for the many OEM applications. |
|
| ... products without technical information |
| |
| Dinamic Oil is available to evaluate, design and produce special winches driven hydraulically or electrically, according to our customer's specific requests. The product will be personalized to completely satisfy the technical and dimensional requirements of the application; the use of standard products guarantees an economical solution of high quality, reliability and performance. |
|
Dinamic Oil has developed a complete range of products dedicated to the tower crane industry: slewing gearboxes, lifting winches and carrousel translation drives. Dinamic Oil has proposed a solution to each of these crane drives by realizing a dedicated product according to the markets requirements.
|
|
| The particularity of Dinamic Oil's pulling winches is the design of independent modular blocks (hydraulic motor, negative disc brake and planetary reduction step). This concept guarantees a high reliability and simplicity of use that satisfies the requirements of the end user and facilitates the installation and maintenance work. |
|
| Dinamic Oil is available to evaluate, design and produce special winches driven hydraulically or electrically, according to our customer's specific requests. The product will be personalized to completely satisfy the technical and dimensional requirements of the application; the use of standard products guarantees an economical solution of high quality, reliability and performance. |
|
... see all the products in the category
Winches
|
| In line or bevel planetary gearboxes with flange, foot or pendular mounting in mobile or industrial applications. Nominal Output torques vary from 100 daNm to 130.000 daNm. |
|
| Rotating case gearboxes, complete with static negative disc brakes, offer the best of both our planetary gearboxes and hydraulic lifting winches. Nominal output torque values range from 4.000 Nm to 50.000 Nm. |
|
| Gearboxes complete with reinforced output supports, integral pinion, static negative disc brake and input coupling for hydraulic motors; nominal output torques range from 4.100 Nm to 60.000 Nm. |
|
| Complete with ring gear, worm gear, bearings and orbit motor. Thanks to its high performances, the rotary table is a compact, simple and economical solution for the rotation drive of small cranes and aerial platforms. |
|
| Radial piston motors with fixed displacements from 100cc to 2200cc for industrial applications that require high torque and efficiencies at low speeds. |
|
|
