|
|
CTR 650 M
Offering value for money, Against CTR 650 and CTR 650 S, there is manual feed into the cut and return. Compared to the competition in the category of manual band saws, it is the only one that has motorised blade height setting from the central control panel. The setting is single speed with an option of electronic measuring with the LG 100. All this significantly accelerates, facilitates, and makes more accurate the height setting of the saw blade.
CTR 650 GX
This version is fitted with a professional four-stroke engine HONDA GX 620. The high performance of the engine 14.7 kW (20 HP) guarantees high machine performance.
The engine has electronic ignition and manual starting.
Manual feed into the cut and back as with CTR 650 M. Also the simple height setting of the arm using a hand crank is manual.
|
|
|
|
|
|
CTR 650
Small but very professional band mill. The design of the main component units, such as guide wheels including their bearing system, design of the saw band arm, the drive system, the feed system, etc. are identical with the type series CTR 800 or even the high performance CTR 950 Hydraulik.
With this type, the central control panel is located on a moving bridge of the saw frame. This allows for a closer contact of the operator with the material during cutting.
CTR 650S
Different from the CTR 650, the central control panel is located on a fixed pillar attached to the machine bed. This allows for comfortable machine operation from one control point.
CTR 800
Vertical and horizontal band saw movement, with variable speed, controlled by a frequency converter. Electrically controlled vertical feed for
board thickness setting enables switching to fast feed (for bigger distances) and slow feed (for exact setting of the required board thickness).
If the required board thickness is selected on the LG-Automat (accessories), the band saw moves to the set value by fast feed and
automatically slows before 'overrun' and stops at the pre-set position with the accuracy of 0,1 mm.
- Electrically controlled horizontal band saw movement; forward and reverse feeds with infinitely variable speed are controlled by a frequency converter. Turning a single button enables an infinitely variable speed change during cut, depending on the timber cut. Feed speed continuously displayed on a digital display.
CTR 950 S
The same structure as with the CTR 950 Hydraulik, but without the hydraulic equipment. Clamping and handling of the cut material is manual. This solution allows for purchasing of a value for money professional machine for cutting of large diameter trunks.
Within the scope of the unique modular system of the CTR type series, even this machine is equipped with all clamping points for additional installation of complete hydraulic accessories.
|
|
|
|
|
|
CTR 800 Hydraulic
Design wise, it is based on the popular model CTR 800 S that is housed on a raised travel frame that allows for installation of complete hydraulic accessories.
Handling of the timber using the hydraulic accessories significantly increases machine productivity. At the same time, it saves labour costs, because the machine control and handling even of very heavy timber can be performed by one employee.
The extension sections with a cutting length of 3 metres allow for installation of hydraulic accessories according to your requirements.
Machine control is identical to type CTR 800 S. At the central control panel, there is also the control of the complete hydraulic accessories.
CTR 950 & CTR 1300 Hydraulic
The very robust machine structure allows for installation of powerful hydraulic accessories that easily handles even very heavy timber.
Two way guidance of the bridge frame on the travel section in combination with a strong motor allows for smooth and quick pulling of even heavy cut pieces while using the sawn timber material feeder.
The machine is equipped with rapid travel of the bridge frame with automatic deceleration at end positions.
The extension sections with cutting lengths of 2, 4, and 6 metres allow for installation of hydraulic accessories according to your requirements.
The basic travel section and the extension sections are equipped with many clamping points for installation of hydraulic accessories, which allows for large flexibility during the design for the customers exact requirements.
|
|
three heads wide belt sander for wood,calibrating+calibrating+polishing
Technical Data:
1 Working Width (mm) 50~1300
2 Working Thickness (mm) 3~100
3 Working Length (mm) ¡Ý500
4 Working Precision (mm) ¡À0.08
5 Motor of Abrasive Belt (KW) 22+22+15
6 Speed of Abrasive Belt (m/s) 20¡¢20¡¢12
7 Abrasive Belt size L¡ÁD (mm) 2265¡Á1300
8 Working Pressure (MPa) 0.4~0.7
9 Compressed Air Consumption (m3/min) 0.9
10 Feeding Speed (m/min) 5~30
11 Motor for Auto-feeding System (KW) 4
|
|
wide belt sander
R-P=contact roller+polishing pad
calibrating and fine pollishing to achieve better surface effect
heavy duty machine body guarantee stablity and durability
main parts are from German,Japan,USA to make good performance
customize furniture wide belt sander (furniture sanding machine),especially sanders other's manufacture can not manufacture
Parameter Data:MMH529R-P
1 Working Width (mm) 100~900
2 Working Thickness (mm) 3~100
3 Working Length (mm) more than500
4 Working Precision (mm) about 0.08
5 Motor of Abrasive Belt (KW) 22+15
6 Speed of Abrasive Belt (m/s) 18.5, 12
7 Abrasive Belt size LXD (mm) 2200X930
8 Working Pressure (MPa) 0.4~0.7
9 Compressed Air Consumption (m3/min) 0.6
10 Feeding Speed (stepless speed variation ) (m/min) 3~14
11 Motor for Auto-feeding System (KW) 2.2
12 Elevator System for Work-table (KW) 0.37
We product wide belt sander with working width from 600mm to 2000mm
|
|
|
THE MACHINE FRAME IS MANUFACTURED OF HEAVY DUTY STEEL PLATE TO MINIMIZE VIBRATION AND DEFLECTION. ALL PARTS OF THE MACHINE CAN BE EASILY OBTAINED FOR MAINTENANCE AND SERVICE. UNDER THE SANDING AGGREGATE AND THE PRESSUREROLLERS, IT’S THE STABLE FEED TABLE. AROUND THE TABLE, IT RUNS AN ENDLESS ANTI-SLIP CONVEYOR BELT. THE DRIVE IS POWERED BY A STRONG FEED MOTOR AND A VARIABLE SPEED CONTROL FROM 4 TO 16 METERS PER MINUTE. THE CONVEYOR BELT IS ADJUSTABLE WITH AN AUTO TRACKING UNIT. THE SANDING BELT RUNS AROUND THE CONTACT DRUM AND THE TENSION (OR IDLE) ROLLER. THE TRACKING OF THE SANDING BELT IS ACHIEVED BY AN ELECTRIC-EYE.
|
|
two sides,two heads,calibrating and polishing wide belt sander
Technical Data
1 Working Width (mm) 80~1300
2 Working Thickness (mm) 0~150
3 Working Length (mm) ¡Ý860
4 Working Precision (mm) ¡À0.1
5 Motor of Abrasive Belt (kw) 55¡Á2
6 Speed of Abrasive Belt (m/s) 20
7 Abrasive Belt size: L¡ÁD (mm) 2800¡Á1360
8 Motor for Upper-body Elevator (kw) 2.2
9 Feeding Speed (stepless speed variation) m/min 6~35
10 Motor for Auto-feeding System (kw) 7.5
11 Working Pressure (Mpa) 0.5~0.8
12 Compressed Air Consumption(m3/min) 1.1
|
|
Maschines for working about veneer, solidwood, radius, chamfer and more.
Many different types about from the simple to the automatical machine
|
|
|
|
|
|
It is a well-known fact that a wooden surface becomes rough after sealing.
The reason for this is that fine fibres are created by ordinary wood sanding
procedures, for instance using a widebelt sander. Because of the pressure of the abrasive material against the surface, the wood's fibres are severed,
resulting in microscopic fibres creating a fuzzy surface. During the following sealing process, tension is generated in the fibres causing them to rise, and thereby giving the surface a rough feel. In other words we need to look at the fibres!
The presence of these fibres must be minimised or efficiently removed before or after the sealing process. The solution is to use the FLADDER® sanding system - an innovative sanding method based on sanding principles which are fundamentally different from those of traditional sanding methods. Rather than sanding with a constant pressure against the surface, the FLADDER® sanding system is based on a principle by which the sanding aggression is created by the sanding tool's rotating speed.
|
|
Heavy duty two heads industrial wide belt sander
Technical Data:
1 Working Width (mm) 50~1300
2 Working Thickness (mm) 3~70
3 Working Length (mm) ¡Ý500
4 Working Precision (mm) ¡À0.1
5 Motor of Abrasive Belt (KW) 30+22
6 Speed of Abrasive Belt (m/s) 18.5¡Á22
7 Abrasive Belt size L¡ÁD (mm) 2265¡Á1330
8 Working Pressure (MPa) 0.4~0.7
9 Compressed Air Consumption (m3/min) 0.6
10 Feeding Speed (stepless speed variation) m/min 4~13
11 Motor for Auto Feeding System (KW) 3
12 Motor for Work-table Elevator (KW) 0.37
|
|
Wide Belt Sander,Wood Sanding Machine,Heavy duty double sides four heads wide belt sander
MMH5813DR-RP
Technical Data
1 Working Width (mm) 80~1300
2 Working Thickness (mm) 0~150
3 Working Length (mm) ≥100
4 Working Precision (mm) ±0.1
5 Motor of Abrasive Belt (kw) 90×2+75×2
6 Speed of Abrasive Belt (m/s) 30
7 1st Abrasive Belt size: L×D(mm) 2800×1360
8 2nd Abrasive Belt size: L×D (mm) 3080×1360
9 Motor for Body-Elevator System (kw) 3
10 Feeding Speed (frequency conversion) m/min 6~35
11 Motor for Auto-feeding System (kw) 18.5
12 Working Pressure (Mpa) 0.6~0.8
13 Compressed Air Consumption (m3/min) 2.5
We product Wide Belt Sander,Wood Sanding Machine with working width from 600mm to 2000mm
www.bonasun.com
|
|
Heavy duty wide belt sander,double sides,four heads
Technical Data
1 Working Width (mm) 80~1300
2 Working Thickness (mm) 0~150
3 Working Length (mm) ¡Ý860
4 Working Precision (mm) ¡À0.1
5 Motor of Abrasive Belt (kw) 75¡Á2+55¡Á2
6 Speed of Abrasive Belt (m/s) 25
7 1st Abrasive Belt size: L¡ÁD(mm) 2560¡Á1360
8 2nd Abrasive Belt size: L¡ÁD (mm) 2800¡Á1360
9 Motor For Upper Body Elevator (kw) 2.2
10 Feeding Speed (stepless speed variation) m/min 6~35
11 Motor for Auto-feeding System (kw) 15
12 Working Pressure (Mpa) 0.5~0.8
13 Compressed Air Consumption(m3/min) 2
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
