|
|
The new F 45 is a gem of modern industrial design. Its sleek external profile reflects real inner quality and a new dimension in user friendliness: the intelligent, absolutely precise electronic controls, which are now an integral part of every Altendorf. On top of that, the F 45 has a large LCD screen on which all settings are displayed.
Coming complete with motorised rise/fall and tilt adjustment of the saw blade, clear on-screen operator guidance and a USB interface for fast data transfer, even the basic specification of the F 45 sets the standard. The three F 45 option packages offer even more in the way of user-friendly options with features such as an eye-level control panel, VARIO drive and motorised rip fence. The new generation of Altendorf F 45: more powerful, more dynamic, more user-friendly.
|
|
|
|
|
|
The new F 45 ELMO has been fundamentally redesigned. The result is a high-tech modular system, which handles even the most challenging technical requirements of the saw user. The low-reflection 12” colour LCD display with touch screen functionality is new. This display method makes for straightforward operation through a self-explanatory, graphics-oriented approach to control. The display shows 90% of the applications, thus cutting down on time spent navigating. The USB port for data
exchange and backup is also new. A further innovation is the crosscut-mitre fence on the F 45 ELMO IV, which can be adjusted to any angle between 0 and 47° and has integral length compensation.
There are two versions of the F 45 ELMO with either three or four motorised axes (F 45 ELMO III and F 45 ELMO IV respectively). Each of these machines can be equipped with optional extras to meet your own individual requirements.
In 2007 the jury of the International Forum Design presented its iF gold award for outstanding product design to the F 45 ELMO.
|
|
The Altendorf WA 6: compact, powerful, outstanding.
What to do when one has little space, plus a limited budget, but quality must still be maintained? When these requirements must be met by a sliding table saw, Altendorf’s answer is: an Altendorf WA 6. The WA 6 is the smallest Altendorf there is. But in spite of its smaller dimensions, its considerable abilities are impressive: with its powerful range of equipment, it stands out even in the smallest space. Outstanding for its cut quality and its flexibility in everyday use. And just as outstanding is the price. So what else is there to be concerned about?
|
|
The WA 8: Altendorf quality for selected markets.
On a budget but still want high quality? Then the WA 8 from Altendorf is the ideal machine for you. This full-blooded sliding table saw delivers Altendorf quality at an affordable price, mastering effortlessly all the cuts that are the daily fare of modern woodworking shops. You get a professionally equipped sliding table saw at a price that makes it attractive both as an entry-level and as a second machine.
|
|
Altendorf WA 80: the classic standard machine.
The new WA 80 embodies only the best Altendorf quality - from the tried and trusted double roller carriage to the high-precision fences and the powerful saw unit. The basic model of this machine is already ideally equipped to meet all the challenges of day-to-day working. Mastering standard cuts as well as complex cutting plans, its well thought-out operating concept makes the WA 80 both economic and ergonomic. Take a good look at this new machine - it sets al price/performance benchmark which is unbeatable!
|
|
MARTIN sliding-table saws ensure your and your company's cutting-edge performance – on a long-term basis. MARTIN stands for maximum precision, extremely long life, and unique extension options for the future.
Our new interpretation of compact-class saws: T60.
The T60 is a trail-blazing machine concept that focuses on what matters: maximum performance at an attractive price. With a clear performance profile, application-oriented usability, maximum reliability, and high economic efficiency, this machine sets a new standard.
MARTIN sets Standards.
|
|
MARTIN sliding-table saws ensure your and your company's cutting-edge performance – on a long-term basis. MARTIN stands for maximum precision, extremely long life, and unique extension options for the future.
With the new T74 sliding-table saw series, MARTIN presents a futureoriented machine concept designed for maximum precision and performance - the optimum basis for a successful future. The features include a modern, Power-PC based touchscreen control, innovative fence technology, and a sound design in MARTIN quality.
MARTIN sets Standards.
|
|
We have 4 diffrent types
-Saw and jointing combination with manual feeding by handle bar.
-Saw and jointing combination with electrical feed.
A clean cut every time with jointing unit – standard equipment.
-Saw and jointing combination with automatic machining sequence,
SPS controlled.
Easy to operate, reliable and with low maintenance costs.
-Programmable veneer cutting and edge jointing machine,
completely automatic.
|
|
CTR 650 M
Offering value for money, Against CTR 650 and CTR 650 S, there is manual feed into the cut and return. Compared to the competition in the category of manual band saws, it is the only one that has motorised blade height setting from the central control panel. The setting is single speed with an option of electronic measuring with the LG 100. All this significantly accelerates, facilitates, and makes more accurate the height setting of the saw blade.
CTR 650 GX
This version is fitted with a professional four-stroke engine HONDA GX 620. The high performance of the engine 14.7 kW (20 HP) guarantees high machine performance.
The engine has electronic ignition and manual starting.
Manual feed into the cut and back as with CTR 650 M. Also the simple height setting of the arm using a hand crank is manual.
|
|
|
|
|
|
CTR 650
Small but very professional band mill. The design of the main component units, such as guide wheels including their bearing system, design of the saw band arm, the drive system, the feed system, etc. are identical with the type series CTR 800 or even the high performance CTR 950 Hydraulik.
With this type, the central control panel is located on a moving bridge of the saw frame. This allows for a closer contact of the operator with the material during cutting.
CTR 650S
Different from the CTR 650, the central control panel is located on a fixed pillar attached to the machine bed. This allows for comfortable machine operation from one control point.
CTR 800
Vertical and horizontal band saw movement, with variable speed, controlled by a frequency converter. Electrically controlled vertical feed for
board thickness setting enables switching to fast feed (for bigger distances) and slow feed (for exact setting of the required board thickness).
If the required board thickness is selected on the LG-Automat (accessories), the band saw moves to the set value by fast feed and
automatically slows before 'overrun' and stops at the pre-set position with the accuracy of 0,1 mm.
- Electrically controlled horizontal band saw movement; forward and reverse feeds with infinitely variable speed are controlled by a frequency converter. Turning a single button enables an infinitely variable speed change during cut, depending on the timber cut. Feed speed continuously displayed on a digital display.
CTR 950 S
The same structure as with the CTR 950 Hydraulik, but without the hydraulic equipment. Clamping and handling of the cut material is manual. This solution allows for purchasing of a value for money professional machine for cutting of large diameter trunks.
Within the scope of the unique modular system of the CTR type series, even this machine is equipped with all clamping points for additional installation of complete hydraulic accessories.
|
|
|
|
|
|
CTR 800 Hydraulic
Design wise, it is based on the popular model CTR 800 S that is housed on a raised travel frame that allows for installation of complete hydraulic accessories.
Handling of the timber using the hydraulic accessories significantly increases machine productivity. At the same time, it saves labour costs, because the machine control and handling even of very heavy timber can be performed by one employee.
The extension sections with a cutting length of 3 metres allow for installation of hydraulic accessories according to your requirements.
Machine control is identical to type CTR 800 S. At the central control panel, there is also the control of the complete hydraulic accessories.
CTR 950 & CTR 1300 Hydraulic
The very robust machine structure allows for installation of powerful hydraulic accessories that easily handles even very heavy timber.
Two way guidance of the bridge frame on the travel section in combination with a strong motor allows for smooth and quick pulling of even heavy cut pieces while using the sawn timber material feeder.
The machine is equipped with rapid travel of the bridge frame with automatic deceleration at end positions.
The extension sections with cutting lengths of 2, 4, and 6 metres allow for installation of hydraulic accessories according to your requirements.
The basic travel section and the extension sections are equipped with many clamping points for installation of hydraulic accessories, which allows for large flexibility during the design for the customers exact requirements.
|
|
|
Automatic cut off saw for defecting and optimized cutting. Feeding by 11 corrugated rollers with a maximum speed of 240 m/min and a tolerance on cut length of +/- 1 mm. Pressure rollers, sitting on pneumatic cylinders, allow the feeding of boards with rough surface and sensible variations in thickness. The 2 meters distance between the camera and the blade ensures a perfect optimisation keeping a compact structure. The control, with operating system Windows XP, is complete and user friendly. On request the cutting line can be completed with a width scanner, a second camera for handling up to 5 grades (3 grades with the only standard camera) an ink-jet printer and with various length sorting systems.
|
|
Decades of experience and best practice gained from large-scale projects lead to fully developed control systems, which are especially adapted to the wood industries.
This implies optimised sequences of machine motions in consideration of the continuity of the manufacturing process.
Integrated data connection to the superior master control level as well as to feeding and transporting production plants can be applied to sawing lines and edgers like in all other sections. The homogeneous user interface allows access to central maintenance of the entire system.
|
|
CIRCULAR SAWING UNIT
CONTINUOUS LOG SAWING LINE
The circular saw enables high-precision finished products to be obtained with a surface finish close to planing quality.
Flexible machine with recycle and possibility of insertion of cants from the log bandsaw.
* Logs length 2m to 7m.
* Diameter up to 400mm or 550mm with protective routers.
* Feeding speed : 10 to 100m/min.
* 4 or 6 movable spindles positioned by ball screws.
* The top saw shafts rotate in the direction of feed and the bottom ones in the opposite direction.
* 9-cutter CHIPPER: good quality of cut.
* During sawing, the blades follow the profile of the log.
* The sawing forces are thus distributed equally on the 2 saw shafts.
* Sturdy, reliable construction.
* Circular saws --> 4 motors : 90 to 160kW
* Chipper --> 2 motors : 90 to 132kW
* Weight : 22000 Kg
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
