|
|
Flip Mirror Holder KSH 90
The swing leaf bears a wobble plate with an adjustment range of ± 0.5° and an aperture of 2". Optics with a thickness > 12 mm (normally 2" mirrors) are fixed with a plastic screw.
Optical components (such as mirrors and beam splitting paltes) having a thickness of only 10 mm can be pressed aganst three stops with the enclosed two clamping shoes and thus fixed.
The swing angle is 45°, the repeatability < 100 µrad. The swing time of the motorized version is about 1 s.
- for use with SYS 90
- black anodized aluminium alloy
- mountable onto pin or slide
- manual operation or motorized
|
|
The laser mirror mounts are high-precision trans-adjustment devices, specially conceived for the use as resonator mirror mounts. Using a RT 65 slide and a S 65 profile rail, a highly stable laser resonator can be set up. The adjustment mounts have a central hole with a 35 mm diameter to hold mounted optics or other components. The horizonatl and vertical angles can be adjusted independently of one another. The maximum tilt is 6° (±3°).
Fine-thread screws with a 0.35 mm pitch are available as adjustment elements. On demand, short fine-thread screws with hexagon socket and locking are available for application in serial devices.
- for use with SYS 65
- suitable for mounting laser resonators
- mountable onto pin or slide
|
|
| Recent advances in optical materials now provide a common technology path to produce mid and long-wavelength infrared (MWIR & LWIR) aspheres by compression molding. LightPath's Black Diamond technology enables high performance, cost-effective IR aspheric lenses that do not rely on traditional diamond turning or lengthy polishing methods. |
|
Lens holders are designed to position miniature lenses over CCD/CMOS imagers with high degree of accuracy. Lens holder must keep the lens optic axis centered on the active area of the imager. It must also keep the lens axis perpendicular to the imager surface. Some lens holders also provide special features for holding IR cut-off filters and optical low-pass filters. Lens holders are precision-molded with special plastic materials.
|
|
| The adjust.x™ mirror mounts are equipped with three fine thread screws made of stainless steel in a brass bushing. Using tight tolerances, the screws have low hysteresis and backlash. These screws guarantee a wobble free movement, high precision and long-term stability. We only offer these screws as allen-key version. One knob will be delivered with each mirror mount. |
|
| ... products without technical information |
| |
IMPACT SOCKETS
Extra Heavy Duty, Single / Double Hex, Standard / Deep Length, for impact / heavy duty manual application, Square Drive sizes from 1/4 Inch to 2.1/2 Inch, A/F sizes from 6mm to 160mm, available in SAE sizes as well, made from Chrome vanadium (EN-47) Alloy Steel with Rust Resistant Black Industrial Finish.
|
|
Action
If you work with impact wrenches we advise you to use the right impact socket with your specific tool in order to achieve the best result and the highest safety during the job. Also extension bars, Adapters and universal joints are available.
Surface Drive Sockets are used in places where fast assembling is required. The easy and fast fitting of the socket on the bolt makes it possible to put the socket on the bolt with a running tool and to make the joint.
Sleeve Drive Sockets have been developed by Action at the request of Yokota to improve the quality of a joint tightening with impulse wrenches. Sleeve Drive Sockets minimize play between socket and tool thus reducing “wobble” and stabilizing the torque setting. The use of Sleeve Drive Sockets is not only of benefit to the actual joint but also reduces vibration to the tool and operator, also reducing noise levels and tool wear.
All Action impact sockets are manufactured according DIN 3121 and DIN 3129. Universal joints and thin wall sockets are supplied without warranty.
Worn sockets cause loss of power and wear to the square drive of the tool increases vibration to the operator. Replace your worn sockets in time. |
|
Lance industries specializes in the manufacture of unusual tooling for industrial Assembly Operations.
We take a pride in creating products that provide long life under the harsh applications of industrial usage. |
|
Impact Sockets
No. 5 Spline Drive
3/4 Inch Drive
1 Inch Drive
1-1/2 Inch Drive
1/4 Inch Drive
3/8 Inch Drive
1/2 Inch Drive
Hex Bits
2-1/2" Drive
|
|
Features:
- All styles of metric and fractional hex sizes through 1 1/4 inch
- 1/4 -1 inch standard square drives
- Special shapes, sizes and drives made to order
- Magnetic, ball, vacuum and other fastener retaining styles |
|
Sockets & Socket Sets
Impact Socket Sets
Impact Sockets
Standard Socket Sets
Standard Sockets
Nut Setters & Nut Setter Sets
Socket Accessories
Bolt Extractor Sockets & Bolt Extractor Socket Sets
Spline Sockets
|
|
Lock your bits firmly
Our holder is precision made that is meet DIN standard non Magnetic or strong magnetic. Your design are very welcome, we have very strong developing department price competitive.
Features:
. Precision made.
. Strong magnetic.
. Sample purchase. |
|
| ... products without technical information |
| |
Flip Mirror Holder KSH 90
The swing leaf bears a wobble plate with an adjustment range of ± 0.5° and an aperture of 2". Optics with a thickness > 12 mm (normally 2" mirrors) are fixed with a plastic screw.
Optical components (such as mirrors and beam splitting paltes) having a thickness of only 10 mm can be pressed aganst three stops with the enclosed two clamping shoes and thus fixed.
The swing angle is 45°, the repeatability < 100 µrad. The swing time of the motorized version is about 1 s.
- for use with SYS 90
- black anodized aluminium alloy
- mountable onto pin or slide
- manual operation or motorized
|
|
The laser mirror mounts are high-precision trans-adjustment devices, specially conceived for the use as resonator mirror mounts. Using a RT 65 slide and a S 65 profile rail, a highly stable laser resonator can be set up. The adjustment mounts have a central hole with a 35 mm diameter to hold mounted optics or other components. The horizonatl and vertical angles can be adjusted independently of one another. The maximum tilt is 6° (±3°).
Fine-thread screws with a 0.35 mm pitch are available as adjustment elements. On demand, short fine-thread screws with hexagon socket and locking are available for application in serial devices.
- for use with SYS 65
- suitable for mounting laser resonators
- mountable onto pin or slide
|
|
| The adjust.x™ mirror mounts are equipped with three fine thread screws made of stainless steel in a brass bushing. Using tight tolerances, the screws have low hysteresis and backlash. These screws guarantee a wobble free movement, high precision and long-term stability. We only offer these screws as allen-key version. One knob will be delivered with each mirror mount. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
