|
|
|
|
|
|
PS-900 Soldering System
The power to solder demanding loads, the control to assure consistent results.
The OKi PS-900 Soldering System, powered by SmartHeat® Technology, is part of a new generation of cost-effective soldering systems from OK International. The PS-900 packs power and provides exceptional thermal control into a small benchtop footprint. The PS-900 provides operators the repeatability to produce high quality solder connections with exceptional speed.
More Applications
The PS-900 increases productivity by performing a wide range of applications. It is suited for lead-free soldering processes, multilayer boards and thermally demanding components. What's more, SmartHeat technology enables the PS-900 to solder at lower temperatures, even for such demanding applications as lead-free soldering processes. This means operators are more productive and materials are safe from damaging temperatures.
Low Operating Costs
The PS-900 is designed for simplicity and low maintenance. With SmartHeat Technology at its core, it requires no calibration. Moreover, it uses high quality tips that assure low ongoing operating costs. Its low cost makes it the perfect choice for small or large production environments, which need exceptional performance, while being mindful of operating budgets.
|
|
Eye-Rim forming machine 2D/3D
Aquisition of the model through a feeler pin. Better accuracy of the finished product thanks to the improvement of the wire properties by using a set of pressure rollers in the horizontal and vertical axes. Easy and quick machine setup when changing wire dimensions. Double check to verify there is no wire slipping to prevent any length difference. Highly precise and fast hydraulic cutting system with the possibility to choose a straight or a "V" cutting. Built-in PC and 14' "CRT monitor" equipped with a continuity group to prevent any data loss in case of black out. Easy realisation of new rim models, with curvature from 4 to 9. Easy correction of both eye shape and curvature where necessary. User-friendly "help on line" software.
|
|
|
|
|
|
The Master Controller V2 is a computerized industrial control unit housed in a robust stainless steel container, designed for automatic and semi-automatic management of soldering cycles carried out using CEIA Power Cube Induction Generators.
The Controller comes with a set of four predefined programs. All operating parameters for each phase of the heating cycle can be programmed within a wide range of values. This allows maximum flexibility in setting the heating and cooling times, the power supplied by the induction generators, the operating temperatures for the piece being worked on and the quantity and feed speed of the solder.
Together with the optical temperature sensors (SH series) and the solder dispensers (WF series), the CEIA Master Controller V2 allows the creation of efficient induction soldering systems and achievement of completely repeatable, economical heating processes and finished products.
An RS-232 serial interface allows connection to a PLC, PC or external logic for remote loading and running of operating programs.
The photocoupler-type static inputs have programmable P/N logic, and together with the static outputs are subject to a programmable auxiliary voltage of 12/24 V.
|
|
Imagine performing all of your production soldering, rework and desoldering tasks with just one tool. The new Multi Function Rework Systems (MFR) not only expertly perform rework, they also have tools for SMT and through-hole soldering. These flexible systems feature two switchable outputs with a choice of comprehensive tools that support today's complex PCB and component technologies.
Systems are configured with the following tools:
* Soldering and Rework
* Production Soldering
* Precision Tweezer
* Standard Tweezer
* Desoldering Station
|
|
| ... products without technical information |
| |
Powerflow™ fume extraction and filtration systems are specifically designed to be integrated with machine production processes that produce hazardous fumes and dust. Purex International engineers are available to advise on the correct combination of pre-filter, main filter and machine required for any specific process, including: -
Wave soldering
Reflow soldering
Etching, marking and cutting
Curing ovens
Powder handling and packaging
High volume chemical handling
|
|
Satellite Paste Applicators are designed to complement an existing heat source, such as furnace or induction. These freestanding units apply single, multiple, or "ring shape" paste deposits onto assemblies. Cycling is automatic and error-free with an operator removing the pasted part and loading it into the adjoining heat source.
Applicator guns can also be mounted to a robot to apply a detailed combination of paste dots and stripes to a particular part. After the pasting cycle, the part is joined to its companion members and fixtured to the subsequent heating and cooling sequence.
Dual station system utilizes rotating mandrel technique to apply 360° stripe of Fusion Paste onto part joint area.
|
|
|
Moldatherm heater realizes energy saving of 15~20% and provides ease of access for maintenance. Each unit is standardized.
|
|
|
|
|
|
World-class Induction Heating System
Power from 65kW to 135kW
Operation from 50kHz to 150kHz
Versatile
-Efficient heating of many part geometries
-Agile operation for repeatable, reliable heating
-Movable remote work head; up to 30m (100')
-Remote operation or logging with RS485 port
-Accepts international AC line voltages
-Operates in environments up to 40C (105F)
Easy to use
-User-friendly control interface
-Sub-second to continuous cycle times
-Programmable configuration;10 six-step profiles
-Cycle timer, peak & short-cycle data capture
-Overload-tolerant output management
-5-language display suite (EN,ES,FR,DE,IT)
EKOHEAT induction heating systems provide a reliable solution for heating your larger parts with a quick, clean source of heat. 65kW, 90kW and 135kW models are all ideal for repeatable, non-contact heating. Power is efficiently delivered through a wide range of coils and loads with precision heating control within 50 W resolution.
Remote process control is available: 24Vdc control inputs, analog outputs and serial data for logging and verification.
EKOHEAT is a water-cooled system, requiring connection to a heat exchanger or other mechanism for dissipating heat.
|
|
| ... products without technical information |
| |
|
|
