|
|
W360-2 1/2" Square Drive Extended Anvil Impact
Cordless Impact Wrench
Pound for pound, the W360-2 is the most powerful cordless ImpactoolTM in the world. Patent-pending IQv technology provides maximum performance, durability, and battery life. Compatible with both Lithium-Ion and Nickel Cadmium 19.2v IQv batteries. As the worlds first ½" extended anvil cordless impact tool, the W360-2 is ideal for mobile service, automotive, tire lane, off-highway, industrial facilities maintenance, and production.
|
|
|
|
|
|
14.4V Cordless Impact Wrench (3.0Ah Li-ion Battery)
- Compact, lightweight 1.5kg(3.3 lbs.) and short body 167mm (6-37/64")
- Powerful design and class-top tightening torque 200N-m (1,770 in-lbs.)
- Powerful large cooling fan for high-motor durability
- High durability, dust resistance and long service life
- Protector protects work pieces from scratches and stains, and has high heat resistance
- Slip-resistant and comfortable soft grip handle
- Convenient 5-position Belt Hook with LED light
- Variable speed switch with electric feedback and brake and forward / reverse changeover pushing button
- Two(2) step action Switch lever (Power mode/ Save mode) (The specification may vary from country to country)
- Externally accessible carbon brushes for easy replacement
- Advanced case for excellent accomodation 14.4V High Capacity Battery: 3.0 Ah Lithium-ion EBL1430
- The EBL1430 Li-ion battery for long life (approx. 1500 battery life cycles)and lightweight
- The Li-ion battery is equipped with overdischarge, overheat and overcharge protection
- The Li-ion battery provides a full charge evry time thanks to no memory effect
- Interchangeable with Hitachi conventional Ni-Cd or Ni-MH batteries
New multi- voltage Charger UC18YRL:
- The UC18YRL is capable of recharging Li-ion, Ni-Cd and Ni-MH batteries from 7.2V to 18V
- Hitachi original chager technologies for overcharge, overheat and overcurrent protection
|
|
BTW251
Fast Charger, Battery Cartridge (Tool does not come with socket)
FEATURES
- Maximum Fastening Torque of 230N.m (170ft.lbs)*
- Same fastening torque in forward and reverse rotations
*torque at 6 seconds after seating
- Compact
- Provides more control and maneuverability.
|
|
ELECTRIC TORQUE WRENCHES
Square drive ¾ Inch to 2-1/2 Inch, Adjustable torque range from 50Nm to 42120Nm, 40lb.ft. to 31000lb.ft., with brushless synchronized motor drive with microprocessor controlled system to shut off precision of the drive motor, single phase connection suitable for 100V to 253V and frequency of 45 to 66Hz, with heavy duty planetary gear box, with reverse-forward drive for loosening and tightening, having idle speed from 0.6 to 38 rpm.
|
|
Double Acting Cylinder
360° x 180° Swivel hose connection to reduce hose whip lashing & easy usage at restricted areas
Special high strenth, ultra-light Aluminium alloy material for strength & light weight
360° adjustable reaction arm with trigger style lock for easy adjustment
Compact unibody design with one way ratchet mechanism
Minimum moving parts for durability & low maintenance
External ratchet freeing mechanism
Working pressure of 700 bars
Accuracy ± 3%
|
|
AIR IMPACT WRENCHES
Having torque range from 40 Ft. Lbs. to 2500 Ft. Lbs. Drive size ¼ inch to 1-1/2 Inch square drive
|
|
The Stanley ID07 Impact Wrench develops up to 500 foot pounds (675 Nm) of impact torque making it an ideal tool for drilling holes from 1/2 to 1-1/16 inch diameter, 18 inches in length and working with fasteners of the same size diameters.
The Stanley IW12 Impact Wrench produces up to 1200 foot pounds (1632 Nm) of impact torque. The IW12 is used for nut, bolt and anchor bolt driving and is equally popular for wood boring and drilling.
The Stanley IW16 Impact Wrench produces up to 2500 foot pounds (3400 Nm) of impact torque. The IW16 is used for nut, bolt and anchor bolt driving and other medium to heavy duty applications.
The Stanley IW24 Impact Wrench produces up to 3500 foot pounds (4760 Nm) of impact torque. The IW24 is used for nut and bolt and anchor bolt driving and other heavy duty applications.
|
|
WR 14VB
Hitachi Impact Wrench
- 420 W (max. output) Hitachi powerful motor and Class-top tightening torque 250 Nm (2,210 in-lbs.)
- Stronger screw connection thanks to the cylindrical housing containing an insert screw for higher durability
- Higher durability thanks to the metalic bearing bushing
- Slip-resistant and comfortable soft grip handle
- Housing is covered with elastomer entirely
- Steplessly variable speed trigger switch
- Forward / reverse changeover pushing button
- Speed change lever is selectable between high / low speed according to the operation
- Grip end is shaped like a finger stopper for portability
- Externally accessible carbon brushes for easy replacement and double insulation
|
|
FEATURES
- Rocker switch provides easy reversing.
- Rubber bumper for tool body protection.
- Features hanging hook for comfortable operation.
|
|
Linear Cylinder Type Hexagon Torque Wrench
Torque Capacity up to 21,180 Nm, Hexagon Cassettes A/F sizes 32mm to 130mm, Maximum Working Pressure 700 Bar.
Double Acting Cylinder.
Linear Power Head - flat & sleek,suitable to exchangeable cassette with one way ratchet mechanism.
Optional square drive cassette attachements for use with Power Head of TLC-28 and TLC-54 models.
Extra Sleek - Ultra strong, exchangeable cassette suitable to limited space.
Special high strength, ultra-light Aluminium alloy material for strength & light weight.
Very compact design with best torque to weight ratio.
Quick exchange of cassettes without using any tools.
360° revolving hose connections.
Torque precision ± 3%
|
|
|
|
|
|
Impact Wrenches - Power and Speed
Atlas Copco´s powerful, high-speed impact wrenches are designed to cut production times by providing fast run-down and quick tightening. Impact wrenches build up torque in joints through a series of rotary impacts. The portfolio includes both shut-off and non shut-off impact wrenches.
LMS - Non shut-off impact wrenches
These tools provide enormous power, yet you are in full control, and there is virtually no reaction force during tightening. The torque is applied to the joint, not your wrist. All Atlas Copco impact wrenches have a wide torque range, so each tool
can be adjusted to handle many applications.
- Fast tightening and disassembly.
- Wide torque range (70-10000 Nm).
- Low weight.
- Negligible reaction force.
- Soft-start throttle
LTS - Shut-off impact wrenches
These tools automatically shut off when the preset torque is reached, elimina ting the need for guesswork. Place the tool on the joint to be fastened and
press the trigger. The tool will automatically shut-off at a predetermined torque
level, which provides for an operator independent tightening.
- Automatic shut-off shortens tightening time
- Consistent torque accuracy
- No over-torquing
- Low weight
- Adjustable torque settings (80-650 Nm)
The purpose of the added bounce energy
principle is that the energy con tent of each
impact is added to the next and following
impact until the preset level is reached
and the tool shuts off.
|
|
Torque Range:
20 – 2450 Nm
15 – 1800 Ft. Lbs.
Bolt Size:
M10 – M30
7/16 – 1 1/2”
m Lever and trigger start
m Reverse or forward bias
m 6” extended and spline drives
available
|
|
Industrial Tools
Your success is our success
The innovation drive at MANNESMANN DEMAG Drucklufttechnik KG knows no compromise. And the permanent
technical further development of our quality industrial tools always has utmost priority
for more customer benefits.
Focal aspects in the development of new precision tools are therefore
- improvement of performance data,
- extension of the product service life,
- reduction of noise emissions for an added environmental benefit,
- perfection of ergonomic design to make life easier for the worker
In development and design, MANNESMANN DEMAG Drucklufttechnik KG has always used state-of-
the-art technology - from the first CAD 3D drawings right through to the thoroughly tested
end product.
|
|
These tools are Heavy Duty and suitable for high production rates such as those on production/ assembly lines, where high durability is required and the tools are used frequently.
Torque Controlled - Tool 'shuts off' at a predetermined torque with the added benefits of being able to eliminate some operator influence and be used for 2 or more torques.
|
|
DOUBLE STIKE 3/4" IMPACT WRENCH
reversible type with tightening and loosening
4 positions of torque tightening regulator, incorporated until 103Nm
sockets locking by means of pin + jong system
maxi bolt capacity (D in mm): M22
maxi torque tightening (Nm):900
no-load speed (rev):6500
air consumption (l/minute): 390
advised using pressure (bar): 6.2
|
|
3/8" impact wrench
NJ.1300F
Technical caracteristics
- Speed controller.
- Pressure adjustment knob.
- Direction reversal knob.
- Free speed : 12,500 rpm.
- Recommended dynamic torque : 7 - 68 N.m.
- Maximum dynamic torque : 102 N.m.
- Guaranteed static torque : 82 N.m.
- Impact rate (per minute) : 600.
- Average air consumption : 85 l/min.
- Air inlet thread : 1/4".
- Working pressure : 6.2 bar.
|
|
Modern design practices cause many threaded
fasteners to be located in such a way as to be
practically inaccessible to power tools. The only
modern production tool for accurate torquing of these
“hidden fasteners” is the versatile ratchet wrench with
its flat, narrow attachment and wide variety of sockets.
High performance, lightweight air motors are used in
Gardner-Denver Ratchet Wrenches. Stall-type and
clutch actuated air shut-off features provide a motor
selection that can be matched to meet job
requirements. Reverse rotation of the fastener is
accomplished by simply turning the tool over.
To accommodate various size diameter sockets,
several side plate widths are offered for each motor
size, thus providing a wide range of available torques.
|
|
CP produce a range of angle screwdrivers to enable fastening for restricted access applications.
Angle head direct drive
The angle head direct drive range with torque setting by air admission is one of the more accurate tools for soft joints. Their specific design is greatly appreciated in tight areas.
|
|
JUNIOR RATCHET3/8"
high handiness for all screwing works
compact head offering a bigger flexibility in restricted places.
easy-to-reach reversing switch
sturdy gears for a longer durability
maxi torque: 67Nm
no-load speed: 160 revs
air consumption: 180L/minute
using advised pressure: 6.2 bars
threaded admission: 1/4"
L(mm) 227
|
|
PNEUMATIC TORQUE WRENCHES
Square drive ¾ Inch to 1-1/2 Inch, Adjustable torque range from 165Nm to 11200Nm, 120lb.ft. to 8260lb.ft., input air pressure 2 to 7bar, with heavy duty planetary gear box, with reverse-forward drive for loosening and tightening, having idle speed from 1 to 48 rpm, suitable for use in highly explosion risk areas.
|
|
Hytoric XXI
Stud tebsioning should be fast, hands-offn, precise and at decent pressures.
The 10,000 psi, 700bar XXI incorporates the latest Technology in bolting tools, Continous Rtotation.
|
|
ADJUSTABLE “CLICK TYPE” TORQUE WRENCHES
Ratcheting and Non Ratcheting head models with torque range from 2 - 2000 Ft. Lbs., 0.3 - 275 Kgf. mts. and 3 - 2700 Nm. Repair and Re-calibration Facilities available;
|
|
Torque Tools
Dial Torque Wrenches
Electronic Torque Meter
Micrometer Torque Wrenches
Torque Multipliers
Torque Accessories
3/4" Drive 60-300 Foot Pound Ratchet Head Micrometer Torque Wrench
(J6018AB )
Length 32"
Weight 14 lbs
Drive Size 3/4"
Head Depth 2-1/16"
Head Length 2-5/8"
Increments (ft/lb) 2 ft. lb.
Torque Range (ft/lb) 60 - 300
45 tooth gear/floating pawl design for small 6.8"arc swing
13% smaller head for access in tight work areas
Reversing lever designed for quick, one handed operation
10-80 ft/lb thru 140-700 ft/lb
21-116 Nm thru 217-976 Nm
Packaged in blow molded plastic box for protection and easy storage
Calibrated ~2% one direction available upon request
|
|
The Ideal Hydraulic Tension Tool has continuous Rotation!
The Ideal Hydraulic Tension Machine is HYTORC-XXI®!
Stud-tensioning should be fast, hands-off, precise and at decent pressures. The 10,000 psi, 700 bar XXI incorporates the Latest Technology in Bolting tools, - Continuous Rotation. By use of the HYTORC or the HYTORC CLAMP
Accessory, the XXI reinvented Industrial Bolting providing for the first time an unprecedented Bolt Load precision and Reliability at an unprecedented Speed and Safety.
Continuous Rotation
Anti Backlash Design
360 degree Uni-swivel
Simultorc-switch*
New Ergonomic Design
3 times faster than prior art
360 degree Job-adjustable
300,000 psi Alloy-mechanism
Torsion-free internal Mechanism
Upgradeable for Stretch-to-load!
|
|
IMPACT SOCKETS
Extra Heavy Duty, Single / Double Hex, Standard / Deep Length, for impact / heavy duty manual application, Square Drive sizes from 1/4 Inch to 2.1/2 Inch, A/F sizes from 6mm to 160mm, available in SAE sizes as well, made from Chrome vanadium (EN-47) Alloy Steel with Rust Resistant Black Industrial Finish.
|
|
Lance industries specializes in the manufacture of unusual tooling for industrial Assembly Operations.
We take a pride in creating products that provide long life under the harsh applications of industrial usage.
|
|
Impact Sockets
No. 5 Spline Drive
3/4 Inch Drive
1 Inch Drive
1-1/2 Inch Drive
1/4 Inch Drive
3/8 Inch Drive
1/2 Inch Drive
Hex Bits
2-1/2" Drive
|
|
The Atlas Copco STwrench has a truly modular design, it can be used as a production tool or as a quality assurance tool.
Use the STwrench for production to get
full traceability of the entire tightening operation
including torque control, angle control
and yield control. Or build your wrench to
just tighten your joint with high torque accuracy.
Or use it for quality control to check residual
torque, to perform joint analysis, including
joint behaviour and stiffness, to set the
correct tightening parameters for production
and to test the reproducibility of joint
stiffness on the benches.
Build your own STwrench and create the
ultimate wrench for your specific requirements.
|
|
Coated torque wrench for working in explosive atmosphere- GD8-56 1/2
-Tightening capacity: 8 to 56 Nm.
-Precision + or - 4mm.
-Automatic release and reset.
1/2" (12.7 mm) square drive for G442 or GSL442 sockets.
-The wrench is identified by a serial number and comes with a verification certificate in accordance with NFX 07.011.
-The wrench complies with NFE 74.400 ATEX II and is not suitable for jobs involving gas and electricity.
|
|
DYNALIGHT ELECTRONIC TORQUE WRENCH (ROUND END )
Normes : NF EN ISO 6789
Torque control wrench for quality, maintenance and assembling departments,for precision applications.
general properties:
-1 to 400 Nm range (0.5 to 300ft.lb)
-+ or - 1% precision of the measurement, effected regardless of the hand position.
-Tightening and loosening.
-pre-alarm 80% and alarm 100%( sound and visual).
-Visualization of the measured torques.
-traceability ( all the torques are memorized)
-Automatic zero reset with start-up error message.
-bilingual French/English conversational menu- 4 touches keyboard.
-Automatic locking keyboard against bad handling.
- RS232 output ( PC or printer).
-PC record with conversion diskette to Excel format.
-Round joining (DYL) or rectangular (DYLC).
Specifications:
-autonomy: 55 hours
-memory: 250 torques
-Feed: 9v battery (6LR61)
-display: alphanumerical 16 character DATA "full screen"
-Units: N.m and Ft.lb
-Menu: French/English
-Measure mode: Peak
|
|
|
|
