Wireless access point (WAP)
DIN rail, -20°/ 70°C ACKSYS

M340 Wireless companion

The M340 wireless companion is a single slot backplane compatible module that allows the M340 processors to interface easily with the WiFi wireless network in order to communicate with devices located remotely. The device integrates a built-in switch in order to offer 3 Ethernet 10/100 ports; one port is reserved for the M340 CPU connection.

M340-WC can be configured as an Access Point, an Ethernet Bridge or a WDS repeater, in infrastructure and AD-HOC modes. It also supports the MODBUS/TCP, PROFINET and Ethernet/IP industrial protocols.

It supports the IEEE 802.11 a/b/g/h/n WiFi standards (2.4 / 5 / 5.4 GHz), for a maximum data rate of 108 Mbps in the super A/G mode.

M340-WC can be connected directly to the M340 CPU in slave mode or even to a M340 NOE is master mode for distributed I/O and I/O scanner modes support.

M340-WC is powered from the +24VDC available on the M340 backplane, power consumption is limited to 3.5W; furthermore module is hot swappable during operation for simplified maintenance.

LED enable to monitor LAN / WLAN activity and also to display the quality of the radio link in order to get the best result while installing the device.

Thanks to its built-in WEB interface, the setup of the device is achieved using a web, and M340-WC doesn't require any additional software to be installed (no peripheral driver needed).

It can also be administrated with ACKSYS NDM (ACKSYS Networking Devices Manager) and SNMP.

M340-WC is designed for industrial applications: data collection, PLC connection, and to satisfy to severe requirements in terms of operating environment: from -20°C to +70°C.