Needle valve
max. 10 bar | 55940, 55955 series
AIGNEP
1 Nickel-Plated Brass Nipple
2 Nickel-Plated Brass Locking nut
3 Nickel-Plated Brass Adjusting Knob
4 Steel AISI 304 Washer
5 Nickel-Plated Brass Adjusting needle
6 Nickel-plated brass sleeve
7 NBR O-Ring seal
8 NBR Lip seal
9 Technopoymeric Body
10 Nickel-Plated Brass Capsule
11 Acetalic resin Collet
12 Steel AISI 301 Clamping Washer
13 Technopoymeric safety Ring
14 NBR Lip seal
15 Brass Tube-guide Support
16 NBR Thread Packing
17 Nickel-Plated Brass Base
Connection Tubes Plastic tubes:
PA6, PA11, PA12, Polyethylene, *Polyurethane, ecc.
*For Polyurethane hoses it is required a minimum hardness of 98 shore.
Temperatures Minimum temperature: -20 °C
Maximum temperature: +80 °C
Threads “Short” Tapered thread.
Metric in conformity with ISO R/262.
Pressures Minimum pressure: 1 bar (0.1 Mpa)
Maximum pressure: 10 bar (1 Mpa)
Fluids Compressed air.
O-ring
The O-ring on the needle, guarantees the complete, sealing of the regulator.
Montaggio a pannello
Wall mounting, possible throught the nipple and threaded ring nut.
Montaggio a parete
It provided for wall mounting, with M3 screws inserted into the appropriate locations.
