Manufactured in 1.6 mm thick anodised aluminium (S/UNE 38337) which prevents corrosion with time. Silver-coloured anodised finish with average thickness of 15 µ. High resistance to corrosion. Interior separation for the floor fixing bolt. Marking guide in all of the channelling to facilitate the positioning of the floor fixing bolt. High load resistance, allowing impact from external agents, such as knocks, people standing on it etc. The 85x15 channelling (Ref. TSCN002) has 2 separate interior compartments. The 130x18 channelling (Ref. TSCN001 and Ref. TSCNA01) has 3 separate interior compartments. The floor channelling can be manufactured both open and closed. Manufacture in a single block avoids the entry of water to the inside and allows cleaning without problems. The earthing of the channelling is carried using a part manufactured for this purpose, which allows ground continuity by means of pressure. The earthing cable is screwed onto this. (See channelling fittings Ref. TSCNT00). Supplied in lengths of 3 metres.