Application Finely divided materials, such as short swarf and grinding sludge, with or without coolant flow in either direction. It is also capable of conveying on a steep incline. The drag conveyor also be used when multiple discharge points are needed, for example when chips should be discharged in several different bins. Since the carry-run is on the bottom side, discharge gates are easily incorporated in the design Features - Forged steel chain - Flights usually spaced at every 8th pitch - The trough is made of press-formed steel - Pitch angle up to 60 - Exchangeable wear plates - Motor, reduction gear and tension adjustments are mounted at the discharge end. Benefits - Carry-over problems are minimised. The return portion of the chain runs back over the top of the carrying area. Thus, any material that clings to the chain or flights is automatically recirculated and given another chance to discharge. - Easy maintenance, since all components are visible when the cover plate is removed. - multiple discharge points