- Non Contacting Incremental System
- Very small measuring head ( metal enclosure)
- Wide range of available resolution up to 1 µm
- Protection class IP67
- Measuring lenghts are up to 100 meter
- Resistant to humidity
- Wide mounting tolerances
- Robust shielded aluminium
- Incremental outputs A, /A, B, /B and Z Reference signal (without or one reset signal by start, or every 5 mm)
- Output signal Push-pull, TTL or RS422 line driver
MLS 2
- Tape in flat aluminium profile
- Wide range of available resolution up to 1 µm
- Protection class IP67
- Measuring lenghts are up to 100 meter
MLS 3
Sensor Head in slide carrier with sealed high aluminium profile
Sealed manufacturer of linear encoders are protected from dust, chips and splash fluids and are ideal for operation on system tools. An aluminium housing and elastic sealing lips protect the magnetic tape, scanning carriage and guideway from chips, swarf, dirt and splashwater. The scanning carriage travels in a low-friction guide within the scale unit. It is connected to the external mounting block by a coupling that compensates unavoidable misalignment between the scale and the machine guideways.
- Double protection along the sliding side (four lip seal rings)
- Self aligned
- With integrated guide
- Large mounting tolerances
- Self-adjustment of the clearance between the guide and the carriage.
- Shielded and armoured power cable with a stainlesssteel braid.
- Functional-calibration hybrid circuit.
- Excellent stability of the signals
- Positive or negative signals via Line-Driver outputs
- Pneumatics inlet inlets at the scale end blocks
