Flameproof emergency lighting
FDBAES series
ATX
Applications:
• Provides adequate lighting and/or visual indication of access on
exit routes during an evacuation in a hazardous environment.
• Can be installed in hazardous areas designated as Zone 1, 2, 21
and 22.
• Typical applications include oil refineries, petrochemical plants,
pulp and paper mills.
Features:
All versions:
• Power supply 230 Vac 50/60 Hz.
• 1 hour duration.
• Threaded access cover with O-ring seal.
• Can be maintained in hazardous areas as an internal switch cuts
off battery supply automatically once the cover is unscrewed
and opened.
• Interchangeable flameproof battery pack.
- 4.8 V - 4 Ah (Fluorescent version)
- 3.6 V - 4 Ah (Incandescent version)
• Padlockable switch is available on switched models which
individually cuts off power supply and remote control.
• Charge indicator by 4 nos yellow LEDs (life time over 10 years).
• Operates in any position.
• Non-maintained 8 W fluorescent or 2 x 3 W incandescent lamp
versions (lamps supplied).
• Connection to plug-in terminal block via
2 x 5 x 2.5 mm2 terminals.
• Supplied with two fixing lugs.
• Automatic built-in self-test system (SATI) with memorization of
tests indicated by LEDs.
• Using a microprocessor and an internal clock, the unit will carry
out automatic tests.
• Weekly test: Lamp check during 6 seconds.
• Quarterly test: Emergency operation and lamp check for 1 hour.
• Can be remotely controlled and checked without switching
the mains off with remote control unit from Legrand (Catalog
Number 03901) or URA (Catalog Number 095448 and 095450)
manufacturers.
